ReviewsDc Planet Gear Motor

PROGRESSIVE AUTOMATIONS 12V Industrial Linear Electric Actuator. 6 in. 330 lbs. Stainless Steel Rod, High Force, Brushed DC Motor, Durable Stroke for Marine, Automation, Robotics PA-09-6-330

  • 【Specification】: Stroke: 1.2inch-6.5inch (Adjustable).
  • Rated Voltage: DC24V. Under the same 24V voltage, the closer to the axis, the greater the pushing force. The maximum pushing force is 7.5kg. The pushing force will be reduced by about half every 1 centimeter of movement outside the axis..
  • 【Aluminum Alloy Material】: The surface has been polished 27 times, the aluminum body efficiently dissipated the DC motor heat, it can make the motor stays cool to the touch even under load..
  • 【TORQUE】: When the Rocker Arm is Closest to the Axis AND voltage is 24V, the maximum pushing force can reach 15 lbs. However, with the decrease of voltage and the Rocker Arm is Far Away from Axis, the Torque will be smaller.The minimum torque is 3.2 lbs..
  • 【Stroke Adjustable】: The stroke can be adjusted by changing the position of the screw on the slide rail. The stroke of this product can be adjusted according to the needs of users..
  • 【Metal Gear Reduction Box】: All metal gear, you could use gear grease in the gear reduction box. In this way, the friction will be reduced and the machine will work more smoothly..
Check Stock

Bringsmart JGY-370 12V 10rpm DC Worm Gear Motor 12 Volt High Torque Engine Mini Turbine Worm 12V Reducer Electric Motor Self-locking for DIY Mini Geared Motor (JGY-370 12V 10rpm)

  • ALL-METAL GEARS, high-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the turbo worm gear box motor body..
  • D SHAPED OUTPUT SHAFT, using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the turbo worm gear motor are improved, extremely durable.
  • GEAR DC MOTOR with MICRO-TURBINE WORM, you can change the wiring-connection to change motor rotation. Low noise and high torque..
  • Application: Label machines, remote control curtains, automatic voltage regulators, barbecue grills, ovens, washers, waste disposal machines, household appliances, coin machines, paper currency recognizers, automatic actuators, coffee machines, towel machines, printing machines and Stage lighting. This section is suitable for small motor configuration high speed ratio, the installation space is limited occasions, large torque output..
Check Stock

Kohree High Torque DC Motor, 12V 60 RPM Electric Gear Box 37mm Centric Output Shaft Gearbox Motor

  • Benefiting from high torque and low noise..
  • This motor is solidly constructed and ready to install in numerous applications.DescriptionSpecifications:.
  • 1 x Mini 12V DC 60 RPM High Torque Gear Box Electric Motor.
Check Stock

Peristaltic Pump Self‑Priming Lab Dosing Pump Large Flow Aquarium Drip Metering Pump Stainless Steel DC Motor Pump(24v)

  • 【Low Noise】The wheel frame has ball bearings, quiet and long service life,with transparent PC removable pump head.
  • 【Replaceable Tube Head】the experimental liquid distribution pump adopts the design screw clasp,detachable while keeping the conveying stable, which is convenient to replace the hose.
  • 【Quantitative Delivery】The Quantitative Delivery Pump with imported peristaltic pump tube,which is resistant to corrosion acids and alkalis, and equipped with constant speed DC gear motor.
  • 【Scope of Application】These small metering pumps have self-priming function and can be widely used in Lab Analytical, analytical testing instruments, ink delivery, ice cream extraction, beverage machine pumps, kitchen equipment warewashing equipment, laundry equipment.
  • 【Specification】DC Motor Voltage: 12V / 24V (optional)--DC Motor Vurrent: 0.5-1.4A--Medium Flow: Flow direction of the pump depends on the positive and negative connections--Flow Range: 0-400ml/min--Pipe: Approx. 6.4 x 9.6mm / 0.3 x 0.4in (Inner Diameter x Outer Diameter)--Roller Type: Ball bearing.
Check Stock

Yahboom 4WD Robot Chassis Kit Robot Smart Car Aluminum Chassis Platform Kit with 4 TT Motor and Smart Car Wheel,for UNO/Raspberry Pi

  • Smart 4WD robot car chassis with 4 rubber wheel/TT DC Gear Motor, horsepower fullness, Operating voltage: 3V - 6V..
  • DC Motor Reduction Ratio: 1:48 (3V Motor No-load speed 125RPM)..
  • Robot chassis kit made of Aluminum material, Size:239.6*181.7*3MM, Maximum Load 2000g..
  • With many circuit mounting holes, users can add some micro-controller (such as Raspberry Pi/Jetson Nano) and sensor modules to realize function of....
  • This 4WD robot car chassis convenient installation, firm and reliable..
Check Stock

MTBs Engage E-Boats : 10 June 1944

  • The kit includes 48V1500 DC motor with MTX Sun Ringle bicycle rim(no tire), 35A max controller, throttle, brake lever, UKC1 TFT display and 7 speed gear. No battery included!.
  • Top speed: 57-58km/h(35mile/h) goes with 26inch wheel.
  • Big torque, 45N./M, good ability to climb the hills.
  • Motor: 180 copper winding+ best quality magnet, hub width: 135mm for rear Wheel.
  • MTX Sun Ringle Bicycle RIm, rim width: 38.9mm..
  • UKC1 TFT display with 3.5” high contrast color screen shows battery power level, time, speed, mileage, gear, input power. Components error checking and report.
  • Pedal Assistance System (PAS)to let you enjoy cycling while driving electric bike..
Check Stock

uxcell DC 12V 350RPM Encoder Gear Motor with Mounting Bracket 65mm Wheel Kit for Smart Robot DIY

  • Motor Size: 25mm x 70mm/ 0.98in x 2.77in(D*L).
  • Wheel Size: 65mm x 26mm/ 2.56in x 1.03in(D*T).
  • Great replacement for self-balancing smart robot..
  • This kit is made for beginners to teach them about programming, electronics and robotics..
  • Package Content:1 x DC Gear Motor , 1 x Wheel , 1 x Bracket, several installation parts..
Check Stock

BEMONOC Garage Door Motor 12V DC Right Angle Reversible Electric Gear Motor 45 RPM High Torque

  • Dc gear motor Dimensions: 175 * 62mm/ 6.88 * 2.44in(L * D).
  • ✔Out Shaft: 10mm shaft with 2 flats where flat to flat is 8mm and threaded end to fit a M6 tightening nut.
  • ✔Mounting: M6 screw holes, include 3 screws.
  • Main Material: Metal, Electronic component.
  • ✔Notice: the motor duty cycle is 100%, it can run continuously, it's our fault to make a wrong label, hope you can understand, any other questions....
Check Stock

X-BULL Winch-13500 lb Load Capacity Electric Winch Kit 12V Synthetic Rope,Waterproof IP67 Electric Winch with Hawse Fairlead with Wireless Handheld Remote and Corded Control Recovery

  • ...neration of wireless remote control, with an IP67 waterproof grade, that can operate accurately from a distance regardless of terrain or weather. This versatile controller incorporates wired and wireless control (up to 35m).
  • [Electric Winch] The 13500 lb. winch powered by a 4.5kw/6.0hp output permanent magnet DC 12V motor. The new solenoid successfully implements the principles of heat insulation, toughness, high stability, avoid the problem of capstan damage or motor burning caused by insufficient solenoid power. The connection between the clutch and the gear is strengthened by the new clutch system, making it more difficult to damage the clutch..
  • [Safety] For positive load control, there is a Power in & Power out motor. The powerful current can not only support the motor's operation smoothly and work within its rated current without any current impact, but also ensure the electric winch safety and your safety at all times. A 3 stage, 6.0 HP series wound motor comes with a 265:1 planetary gear ratio..
  • [Gear System] With its modern and effective 3 planetary gear system, free spooling clutch and ability to deliver strong traction under load and higher linear speed, this electric winch will prove to be an invaluable travel companion..
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 600RPM Gear Motor with Encoder for Robotics

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 120 Pulses Per Revolution: Gear Reduction Ratio: 1/10, Each Loop Output Pulses: 12PPR 10*12=120PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Champion Fullfillment CMF13005 Champion Power Winch Kit (3,000 lb)

  • Galvanized super-duty aircraft cable (45.9 feet x 3/16 inch).
Check Stock