ReviewsDc Speed Reducing Motor

Hoverboard Morning

  • Motor Speed Controller Brushless Controller with Hall-less.Full SMD process,stable performance,humanized design, interface all adopts terminal blocks..
  • "Voltage 5-50V high power 380W DC three-phase high-speed brushless sensorless controller. ".
  • Standard heat sink,onboard speed regulating potentiometer,you can use it when you have power on..
  • DC three-phase high-speed brushless sensorless controller recognizes PWM signal input, amplitude 3-5V supports PLC0-5V analog quantity, input control.
  • "Size-Length 63MM * width 45MM * height 31MM,Over-temperature protection:yes (half the over-temperature power) Maximum speed:224000 RPM (2 pole motor),74000 RPM (6 pole motor),40000 RPM (12 pole motor), 35000 RPM (14 pole motor).".
Check Stock

ICQUANZX DC Motor Speed Controller, 60A DC10-55V Motor Governor High Power Control Board with Digital Display - 0-100% Adjustable

  • Adjustable speed range is 0%-100%. Suitable for the DC motor (or DC load) within 60A..
  • The input voltage range from DC 10V to 55V, and the rated current 60 amp, so it's really a large power speed controller..
  • Can adjust the motor speed through potentiometers, and support rotation adjustment..
  • Fitted with a display panel which display the rate in percent of actual speed to maximum speed..
  • Apply to: DC brush motor / brush fan / LED.
Check Stock

ICQUANZX DC6-60V DC PWM Motor Speed Regulator Power Controller with LED Digital Display, Slow Start/Stop Revolving Speed Time Adjustable

  • This is a simple and easy-to-use DC motor speed controller of small size, elegant appearance and stable performance..
  • Designed with a digital display panel for easy reading and convenient setting of speed adjustment..
  • DC Motor Controller can set the time of DC Motor Slow Start and Stop, revolving speed time adjustable, easy to operate,which reduces the mechanical stress on the motor and shaft..
  • Acceleration and deceleration value setting: Each time you press the plus or minus button, the speed changes by 1%, 2%, 5%, 10%, 15%, 20%, 25%..
Check Stock

High Torque Permanent Magnet DC 12V High Speed 12000 RPM Brush Small DC Motor

  • Efficient DC Motor: The electric motor with 100% copper core has low noise and excellent speed regulating performance. The small-sized permanent magnet DC motor with an output power of 3/4 HP is compact and energy-saving. Dynamic balanced armature for smooth operation..
  • Steel Housing: The shell of the permanent magnet DC generator is made of steel. The reliable metal material and high-quality oriented magnets can well guard the internal circuit from thermal overload. Smooth appearance is convenient to clean and use..
  • High Speed Cooling Fan: Big fan at one end cools the high-speed DC motor in hours' running even in dusty or damp environments. It is able to reduce energy costs or overheads, reduce the running temperature, and increase winding lifetimes..
  • Detachable Base: High torque DC motor with 56C frame and a removable mounting base provide dual mounting versatility for easy mounting. The carbon brush is a consumable part, and the package includes one pair of spare carbon brushes that can be replaced in time..
  • Multiple Application: DC motors have a wide range of applications. Our permanent magnet motor-generator is generally used in wire peeler, baler, paper cutter, and other mechanical equipment and automated control systems..
Check Stock

Speed Controller AC 50-220V 2000W 25A Motor Controller SCR High-power Electronic Voltage Regulator Module Motor LED Dimmers (1PCS)

  • The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances.
  • It can use to such as electric stove, water heater tune thermal, lighting dimmer, small motor speed, electric iron thermostat, and achieve dimming, thermostats, pressure regulator effect..
  • The motor speed controller can easily provide a continuous current to your DC motor or other DC load..
  • Universal DC Motor Speed Controller.Control the speed of a DC motor with this controller..
  • Before you attempting to wire the controller, make sure all power is disconnected. Cut any one of the battle line or zero line of the lamp or electrical appliances, and connect wires refer to the "wiring diagram".
  • Turn on the power, and adjust the potentiometer..
Check Stock

Electric Scooter Adult, 5 Inch 24V 180W Motor, Brushless Motor, Low Noise, with Hall Sensor, Electric Scooter Motor Replacement Parts

  • 1. HIGH SPEED MOTOR: Powerful Brushless DC Motor Kits 2500W 60V, Rated Speed No-load 4400rpm, Max can be 5800rpm, Motor Rated current 45A..
  • 2. DIY KITS, Electric Go kart Motor, small size, high speed, BLDC mid-drive motor with T8F sprocket, scooter motor with mounting bracket is easier to install and carry, with air cooling holes..
  • 3. DC motor kit reverse design, BLDC kart motor can run clockwise or counterclockwise through motor reverse line or handlebar reverse switch, and has a 3-speed function, low speed 50%, medium speed 70-80%, The high-speed speed is 100% efficient, but do not let the motor run in reverse for a long time, which is not safe for the motor life..
  • 4. 24 Mosfet 45A brushless motor controller. This speed controller uses high-quality materials. This controller has Hall, 3-speed, reverse, throttle, charging, electronic brake, power lock, light functions, etc..
  • 5. List and application of electric scooter motor kits, BLDC motor, speed controller, handlebar throttle, pedal throttle, power lock key, T8F tooth plate ring, T8F chain, 3-speed switch. Suitable for electric scooters, electric bicycles, mini motorcycles, off-road vehicles, electric karts, bicycles, four-wheel drive vehicles, other DIY projects, etc..
Check Stock

10-50V 100A 5000W DC Motor Engine Speed Controller 0-100% PWM Control Industrial Motor Speed Regulator for DC Brush Motor DC Lamps

  • PWM Duty Cycle:0%-100% and Quiescent current is 0.04A( not over 40mA when voltage is DC10V to DC30V).
  • Operating temperature:-20 to 40.It can perform normally when the temperature is below 0.
  • Universal speed controller can be used for DC brush motor, suitable for car cooling fan motor, car air conditioning motor, exhaust blower, treadmill motor, etc.
  • This motor speed controller can also be used for dimming DC lamps or controlling DC heater.
Check Stock

150 W 24 V 12 V DC Electric Motor zy6812 f Scooter Bike go-Kart or minibike New

  • 【HIGH SPEED POWERFUL MID MOTOR】- Brushless DC Motor 36V 1000W, Rated Speed No-load 3100rpm, Motor Rated current 27.7A, Smaller and Lighter Compared body Make More Power efficient, High Quality Aluminum Shell to be Sturdy and Reliable, Easy to Install for Go karts E-bike Scooter mini Motorcycle Quad atv and more..
  • 【SMALL BODY WITH HIGH EFFICIENCY】- Small Size, With high Torque High speed, BLDC Mid Drive Motor with T8F Sprocket, and the Scooter Motor with Mounting Bracket is more easy to Install and Enough Carry, with wind cold hole, Motor Wiring length about 150cm(59inch),Motor Weight about 3.3kg (7.3lb)..
  • 【DC MOTOR KITS POSITIVE & NEGATIVE ROTATION】- BLDC Go kart Motor Can Through the Motor Reversing Wire or Handlebar reverse Switch To Let The Motor Go Clockwise or Counterclockwise, And with 3 Speed Function, Low speed 50%, Mid speed 70-80%,High Speed 100% Efficiency, But Don’t let the Motor Run Reverse Long Time, is Not safe for Motor Life..
  • 【12Mosfet 30A Brushless Motor Controller】- The Motor Kit include 12MOS 30A Speed Controller, BLDC Motor Controller with high Quality Material, is enough for the Motor, with Hall 3-Speed Reverse Throttle Charging e-Braking Power lock Light Functions etc..
  • 【E-scooter Motor Kit List and Useful】-....
Check Stock

DC Moter, DC12V Adjustable Speed DC Motor 180W Permanent Magnet DC Motor 2000RPM with Bracket (DC 12V 2000RPM)

  • [Excellent performance]: Permanent magnet DC motor drive is super stable, low noise, safe to use and stable in operation..
  • [Optional specifications]: Permanent magnet DC motors are available in two specifications, the rated voltage is optional 12/24 (V), with a high speed of 3500/6000rpm and a larger torque..
  • [Support CW / CCW rotation]: This high-speed DC motor can support CW / CCW rotation, and the speed is adjustable..
  • [Hollow shaft design]: The DC motor adopts a hollow shaft design. The fishing line can pass through the hollow shaft, which is very suitable for floating fish..
  • [Wide application]: This DC motor can be widely used in lawn mowers, polishers, cutting machines, electric drills, cotton candy machines, small generators, winding machines, bag cutting machines.
Check Stock

Fielect DC Motor 3V 18500RMP Mini Electric Motor Miniature DC Motors Electronic Component Motor Accessories for DIY Rc Car Robot Toys Cars, 30mm x 12mm

  • 【Material】- The electric motor is made of metal, and the output shaft is made of high-hardness copper, which has good toughness and impact resistance.
  • 【Features】- DC micro motor is durable, stable performance, shockproof, wear-resistant, and high precision. It is an excellent substitute for rusty or damaged DC motors on the machine.
  • 【Function】- DC motor can adjust the speed, but the motor speed can only be reduced, not increased.
  • 【Application】- Micro motors are used in electronic game machine printers, rear-view mirrors, headlight beam level adjusters, car toys, DIY hand drills, electronic equipment, etc.
Check Stock

Stepper Motor Driver Controller Integrated Board Forward/Reverse Pulse Speed Angle Control Module PLC Serial Communication for NEMA 17 23 Motor

  • ★PWM DC Motor Speed Controller, Work Voltage: 9V-60V.
  • Control Frequency: 21KHZ, adopting current adjusting, PWM to control light and speed..
  • ★Linear regulate motor speed by potentionmeter, support forward / reverse rotation regulation..
  • ★Adopting advanced technology, high efficient, large torque, low heat etc. performance..
  • ★Can be widely used for DC brush motor speed controlling, light dimming in DC circuit, PWM can take full advantage of power energy..
Check Stock