ReviewsDc Switch Power

Dimmer Switch, DC 12V-24V 18A PWM LED Light Strip Dimmer with Dimmable Slide Remote Control, Adjust Brightness Dimmer Light Switch

  • 【DC 12V-24V】 Please check whether your power supply is a DC power supply before purchasing (this product is only suitable for DC power supply, not for AC power supply)..
  • 【Upgraded Led Dimmer】: 0%-100% stepless dimming, easy adjustment of brightness through touch remote control to meet different preferences and needs..
  • 【Memory Function】The LED dimmer switch has a memory function so that it retains the last dimming level after switching on via the wall switch..
  • 【Wireless RF Remote Control】The LED string lights dimmer comes with a RF remote control, which supports up to 65FT long range control with strong and stable signal transmission..
  • 【Package Content & Warranty】1× Dimmer Switch, 1×Remote Control(3xAAA batteries not included), 1×User Manual, 1×Cleaning Cloth. Any issue on product, please don't hesitate to contact us, we will response you ASAP and provide the solution for you..
Check Stock

CX210A CX-210A CX210-A Original Diamond Heavy Duty Wideband Coax Switch

  • Coax Switch, Manual, 2-position, Heavy Duty Wideband, DC to 1,000 MHz, 1,500 W max., UHF female/SO-239s, Each.
  • The Diamond CX210A is a low loss, two position coaxial switch providing very low loss and high isolation. It is rated DC to 1000 MHz and can handle up to 1500 watts CW at HF frequencies..
  • There are two removable screws on the bottom of the switch which may be used for mounting..
  • DIAMOND DC ~ 1000 MHz 2 Position Antenna / Coaxial Switch, Power: 1.5 kW, Connector: SO-239.
Check Stock

PoE Texas | 802.3at to 24-Volt Converter | Easily Mix and Match 802.3at and 24-Volt Devices

  • Compatible with any IEEE 802.3at PoE+ Switch or Injector.
  • Dual purpose operation supports either 24-volts DC output with max 25-watts power on the 2.1mm DC or 24-volts power + gigabit data output on the RJ45.
  • Use to mix and match 802.3at and 24-volt passive devices like Ubiquiti on one switch or injector.
  • "Splits" Power and Gigabit data when used with the 2.1mm DC output.
  • Backed by our 1 year manufacturer warranty - For expert technical support from Austin, TX please call 512 479 0317.
Check Stock

Blue Sea Systems 2134 Push Button Reset Only Screw Terminal 20A Circuit Breaker

  • Product Name: Manual Reset 125-250V AC 50V DC Push Button Switch Thermal Circuit Breaker..
  • power rating: 20A (amp).Operating Temperature: -10oC (14oF) to 60oC (140oF) Interrupt Capacity:1,000 Amps.
  • Working Principle: this switch can be reset after a disconnect over a period of time, then you can press the reset switch to use it again When load exceeds rated current, the switch reset button will automatically cut off the circuit, and thus play a role in protecting the line..
  • Package Includes: 2 *thermal circuit breakers with quick connect terminals + 2* Hex Nut + 2* Grip Nut Ring + 2*Waterproof Button Caps.
  • Application Field:Widely used in household and commercial appliances, transportation, marine, telecommunications, power strips, audio-visual, medical, and power supplies.
Check Stock

B&K Precision 878B Dual Display Handheld Universal LCR Meter

  • ...screw connection terminals compatible w/ a wide range of device/equipment. Used to test device/equipment operation and performance.
  • Plug-in operation: The simple plug-in operation provides a constant source of DC voltage, allowing for quick and consistent power conversion. Switch-activated power control eliminates the need for an external battery or additional power source.
  • Short-circuit protection: Equipped w/ built-in electronic overload and short circuit protection to ensure the safety of the operator and any connected electronics. Has rugged and durable housing construction safe for benchtop or desktop Placement.
  • Amp gauge and volt meter display: this DC bench power supply is equipped with rotary control for the adjustable power supply DC and analogue gauge Amperage and voltage Metered display for easy operation.
Check Stock

Homeline Plug-on Circuit Breaker HOM2200BB Branch 200 AMP UL Approved

  • Product Name: Manual Reset 125-250V AC 50V DC Push Button Switch Thermal Circuit Breaker..
  • power rating: 20A (amp).Operating Temperature: -10oC (14oF) to 60oC (140oF) Interrupt Capacity:1,000 Amps.
  • Working Principle: this switch can be reset after a disconnect over a period of time, then you can press the reset switch to use it again When load exceeds rated current, the switch reset button will automatically cut off the circuit, and thus play a role in protecting the line..
  • Package Includes: 2 *thermal circuit breakers with quick connect terminals + 2* Hex Nut + 2* Grip Nut Ring + 2*Waterproof Button Caps.
  • Application Field:Widely used in household and commercial appliances, transportation, marine, telecommunications, power strips, audio-visual, medical, and power supplies.
Check Stock

1-2-Both-Off Battery Switch, 12-48V 200-1000 Amps Battery Power Cutoff Master Switch Disconnect Isolator for Car Vehicle RV ATV UTV Marine Boat

  • 【High Quality】A ABIGAIL Battery Power Cutoff Master Switch is made of Heavy Duty ABS plastic housing which is durable made for safety use. The rear cover insulating the rear terminals against any short circuits, ensuring that the switch meets ABYC requirements..
  • 【Operation】1-2-Both-Off, Rating: 200A DC Continuous (1hr) , 300A DC Intermittent (5 min), 1000A DC Cranking (10 sec), Voltage: 48V DC, Stud Size: 3x5/16" (8mm)..
  • 【Application & Easy to Use】This battery cut off kill switch has four removable side plates provide access of up to 1/0 cables. Widely used for Car, Vehicle, RV, ATV and Boat batteries, also used for electrical equipment. Vertical knife blade type, easy to install & simple to use..
  • 【Function】Used for battery to isolate and secure the electrical system, eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely, can stand alone or be locked together with other switch..
  • 【100% satisfaction guarantee】If you have any issues with our Battery Disconnect Switch, simply contact customer servic....
Check Stock

Kungber DC Power Supply Variable with Memory, 120V 3A Adjustable Switching Regulated DC Bench Linear Power Supply with Memory Recall and Output Disable Button 4 Digits Display and Alligator Leads

  • Easier to Set Values - Encoder switch is used on Kungber dc power supply 2021 version to replace the potentiometer switch which is widely used but not easy to adjust. On this version you can just “set” Voltage and Current instead of “adjust”. Make works accuracy, easy and fast..
  • 4 Groups of Internal Memories - You can set 4 groups of commonly used Voltage and Current combination and easily recall them by press “M1-M4”. Use the “ADJUST” knob to set new combinations..
  • Output Switch Control - Sometimes we need to switch between different voltage or current outputs, but we often forget to unplug the previous instrument and cause to burn out, which often occurs in the maintenance. Output switch is designed to solve this problem. By pressing the On/Off key, the required voltage and current can be adjusted without the actual output power, which makes this benchtop DC power supply more secure and more energy efficient..
  • Reliable and Safety - Kungber variable power supply use premium electronic components, provide reliable working status and prolong the product life effectively. Many safety measures are adopt in Kungber power supply- Grounding wire, Leakage protection, Thermal protection, Voltage overload, Power overload and Short-circuit protect....
Check Stock

12V Dimmer Switch, Briidea RV 12V 5A 60W Dimmer Switch for LED, Halogen, Incandescent, Used for RVs, Travel Trailers, Marine, Auto, Black

  • FULL RANGE STEPLESS DIMMING: 12V DC dimmer switch can achieve 0-100% stepless dimming, you can easily adjust the light according to different environment needs, energy- saving and extend the life of the bulb, creates a best atmosphere in your RV.
  • EASY TO USE: With a simple turn of the knob of 12V dimmer switch , you can dim down, or brighten up your LEDs, quite silent, no buzz and no blink, easy your life.
  • COMPATIBLE DIMMER: Dims up to 60 watts (5 amps) of incandescent, halogen, or LED lighting reducing heat and power drain on batteries. Easy to install, wiring is straight forward, mounts with offered plate, easily replace on/off switch with dimmer switch.
  • LONG LASTING: With retardant material, this 12V DC LED dimmer switch provides excellent anti-corrosion and heat- dissipation capacity, safe and reliable.
  • WIDE APPLICATION & WARRANTY: Perfect for RVs, travel trailers, boats, cars, trucks, or anywhere 12V DC power is present. Fits in small spaces. Provides 2 year warranty and 24 hours customer service.
Check Stock

Programmable DC Power Supply (0-30 V 0-10 A) HM310T High Precision 4-Digit Voltage Current Power Time Display Variable Switching Digital Power Supply with PC Software and USB Interface

  • ...short-circuit protection. It has a protective function. With the automatic temperature control cooling fan, the cooling fan turns on automatically when the operating temperature exceeds 45 ° C..
  • [Multi-function]: Front 5V 1.5A dual USB charging interface that can be charged and repaired. The one-key output on / off switch allows you to preset the voltage and current values ​​when the output is off, which is convenient for operation. One key for the voltage stabilization and current stabilization switch to automatically lock the keyboard to prevent erroneous operation..
  • [Packing]: 1 * Programmable DC power supply.
Check Stock

HiFi 25W DC Linear Power Supply 5.1V 3.5A, Audiophile Regulated Converter Adapter, Upgrade for Raspberry pi 4 Model B -Solupeak

  • Stable DC bench linear regulated power supply Compatible with Raspberry Pi 4 Power Supply with ON/Off Switch.
  • Upgrade for RPi 4 Model B 1GB / 2GB / 4GB Version, Include Type-C cable.
  • 25VA power transformer, output DC 5.1Volt, current max 3.5A.
  • Desktop Power adapter Regulate,Ultra-Low Noise,provide clean DC power source.
  • USB+5.5/2.5mm DC port output,Note 5.5/2.5mm port should not be used with RPI 4 at the same time, overloading will damage the power supply.
Check Stock