ReviewsDc Three Phase

600W 48V Three-Phase Wind Turbine Generator Permanent Magnet Generator Alternator 600RPM 50Hz Wind Power Turbine Generator for Wind Solar Hybrid System

  • 【High Efficiency & Stability】: Our 48V three-phase alternator permanent magnet generator has great features of high efficiency and stable performance, and the rated speed of this wind power turbine generator is 600rpm.
  • 【Energy saving】: This three-phase 600W wind power turbine generator is a permanent magnet generator, and our 50Hz three-phase alternator generator owns high reliability, which is more energy-saving for users.
  • 【Wide Temperature Adaption】: Our 600rpm permanent magnet generator possesses high and low temperature resisting, and the wide range of working temperature adaption is from -40℃~80℃, so users can rest assured to use.
  • 【Convenient & Simple Operation】: This three-phase alternator generator is very convenient to use and easy to install, which is perfect for industry use. So this permanent magnet generator is an ideal choice for users.
  • 【Specifications】: Material: Ceramic + Metal Rated Power: 600W Rated Voltage: 48V Rated Speed: 600rpm Rated Frequency: 50Hz Lubrication Method: Filling Grease Working Temperature: -40℃~80℃ Weight: Approx. 7700g.
Check Stock

8PCS L298N Motor Drive Controller Board Dual H Bridge DC Robot Stepper Motor Compatible with Ardu-ino Electric Projects, Smart Car Robot

  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
  • The L298N driver module, using L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential..
  • Terminal driver part of the supply area VMS: +5V ~ +35V.
  • Drive part of the peak current Io: 2A / Bridge.
  • Logical part of the terminal power supply range Vss :4.5-5 .5V.
  • Logical part of the operating current range: 0 ~ 36mA.
  • The control signal input voltage range: 4.5-5.5V low 0V high.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
  • High working power to 46v, large current can reach 3A MAX and continue current is 2A, power to 25w..
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability, large capacity filter capacitance,afterflow protection diode, more stable and reliable..
Check Stock

Mattel Games Phase 10 Card Game

  • Phase 10 is the Rummy-type card game with a twist!.
  • Be the first player to complete 10 varied phases with two sets of three, one run of seven, or seven cards with the same color..
  • Each phase is specific for each hand, meaning each player must complete one phase before advancing to the next round!.
  • “Wild” and “Skip” cards add excitement and deliver game-changing moments..
  • Phase 10 game is fun and enjoyable for the whole family!.
Check Stock

Din Rail WiFi Circuit Breaker Smart Switch Remote Voice Control by APP for Smart Home mcb Timer 110V 220V 380V (Size : Three Phase, Color : 80A)

  • Wifi remote control Switch ciruict breakers.
  • Three phase work with 3*120V, 3*220V, 3*220V, 3*230V, 3*240V.
Check Stock

PRINCE CASTLE Drive Motor Assembly 87-028AS

  • ATO 110v vfd, single phase 110v/120v input, single phase or three phase 220v output, achieve to run 220v AC motor on single phase 110v/120v power supply.
  • 【Voltage& Frequency】Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz,Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
  • 【APPLICATION】ATO 7.5 hp 5.5kW variable frequency drive Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
  • 【TIPS】 To protect the variable frequency drive and Motor, you need an upstream protection, add a line-choke upstream the VFD, this will reduce the current transients seen by the input of the VFD.
  • 【CUSTOMER FIRST】If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

Brushless DC Motor 3000W 72V Electric Motor High Power Brushless Motor Controller 50A Scooter Motor Go Kart Electric Motor Kit

  • Brushless DC Motor 3000 watt powerful motor, The motor adopts all-copper lugs, high-quality magnets and rotors, low-noise operation and long service time.
  • 3000W 72V Electric Motor, 4hp high power and high speed, 4900rpm/min rate speed, 6700rpm/min max speed, 45 amp rate current , 5.4N.m. of torque and 100-150kg ( 220 - 330lb ) maximum load.
  • Brushless Motor Controller 50A, 48-72 volt, 3000 watt, 120°phase degree.
  • Multifunctional intelligent controller Low-level brake, 3 Speed, Reverse, Brake Light, Indicator Light, Battery Charge and Ignition Lock.
  • Three-speed Throttle: three speeds can be adjusted, low speed 50%, medium speed 75%, high speed 100% and also has a reverse switch, Cable length is about 150cm ( 59 inches ).
  • Package Include: 72V 3000W Motor*1pc, BLDC Controller 50A*1pc, 3 speed throttle*1pc, Ignition Lock*1pc, T8F Sproket*1pc, T8F Chain*1pc, Manual*1pc (without battery)..
Check Stock

DaFuRui 10Pack KY-040 Rotary Encoder Module 360 Degree Rotary Encoder Module with Knob Cap for Arduino

  • This incremental rotary encoders Exquisite workmanship ,Quality assurance for 1 years. If there are quality problems within 1 years, you can send us email. We will send you new ones ..
  • Product Name: incremental rotary encoders 600P/R , AB two phases.AB two -phase quadrature output rectangular pulse, the circuit output is NPN open collector output type ..
  • Encoder size : Encoder size: 38 x 35.5mm/1.49" x 1.39" ;Shaft: 6 x 15mm/0.23" x 0.59";Axis stopper platform: High 5mm, 20mm;Power source: DC 5-24V;Maximum mechanical speed: 6300 R / min..
  • Connection: white = A phase, Green = B phase, red = power +, black = V0 ; Note: AB two -phase outputs must not be connected directly to VCC, otherwise, they will burn the output transistor..
  • Package content:1 x Incremental Rotary Encoder ;Net Weight : 130g.
Check Stock

1-600MHz RF Power Meter,Jectse Digital LCD RF Power Meter -75~16 dBm 1-600MHz Radio Frequency Attenuation Value

  • Repetitive Peak Reverse Voltage(AC):1200V.
  • 【Material】 - The rectifier diode is made of aluminum, with large current capacity, good heat dissipation, and low voltage.
  • 【Features】 - The two-pole rectifier has low power loss, low reverse leakage current, electrically isolated metal shell, which can maximize heat dissipation.
  • 【Advantage】 - This is a high-quality two-pole rectifier used to convert AC input to DC output, which can be used in a variety of applications.
  • 【Application】 - This rectifier is used in the rectification circuit of electrochemistry, electrolysis, electrolysis, traction, switchgear operation power supply, etc.
Check Stock

ATO 1 hp VFD, 4A 0.75kW 120V Input 220V Output, Single Phase to 1phase/3phase Variable Frequency Drive, for AC Motor Speed Control

  • ATO 1 hp 110v VFD, 0.75 kW single phase 110v/120v input, single phase or three phase 220v output variable frequency drive. Running your 1 phase/3 phase motors on 120 volt supply via ATO VFD.
  • Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz, Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
  • 【APPLICATION】: ATO 110V Variable frequency drive can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
  • 【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
  • 【CUSTOMER FIRST】If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

HiLetgo 10pcs TTP223B Capacitive Touch Switch Module Touch Sensor Switch Digital Capacitive Touch Sensor Switch DC 2~5.5V

  • Model: incremental rotary encoders, AB two phases.
  • Connection: white = A phase, Green = B phase, red = power +, black = 0V Note: AB two -phase outputs must not be connected directly to VCC, otherwise, they will burn the output transistor..
  • Output: AB two -phase quadrature output rectangular pulse, the circuit output is NPN open collector output type ,the output of this type can and with additonal added pull-up resistor(not included) is directly connected MCU or PLC.
  • Encoder size: 38 x 35.5mm/1.49" x 1.39"(D*H).
  • Package content :1 x Incremental Rotary Encoder.
Check Stock

Armacost Lighting 840240 for LED Lighting, with Removable AC Cord, 24 Watt, White

  • Provides smooth, full range flicker-free dimming for 12-volt LED Lights such as LED strip lights, modules, light bars, puck and other LED strip lights.
  • Compatible with BOTH 120 Volt AC dimmers and lighting controls and low-voltage DC dimmers and controls.
  • Works with Armacost low-voltage dimmers and RGB color controllers.
  • Input Voltage: 100-120v AC 50/60Hz, λ=0. 65C, output Voltage: 12V DC constant Voltage, 24 watts, 2a max.
  • For optimal AC dimming performance, use a forward phase CL-style or equivalent dimmer. The use of reverse phase or ELV may degrade dimming performance.
  • Connect up to 100% of the rated 24-watt maximum load – derating performance is not required.
  • ETL listed, complies to UL standard 1310 and 8750, certified to Canada CSA standard C22. 2 no. 223-M91 and C22. 2 no. 250. 13, complies with FCC part 15B.
Check Stock