ReviewsDc ac Current Measurement

Fieldpiece SC440 True RMS Clamp Meter with Temperature, Inrush Current, Capacitance and Backlight

  • Connect your meter to your smartphone with Fluke Connect Measurements.
  • Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks.
  • Record results directly to your phone and the cloud.
  • 2500 A AC current measurement with (optional) iFlex flexible current probe.
Check Stock

OTC 3820-06 Low Amp Probe

  • Measures current range: 0-60 ampere AC/DC.
  • Works for ignition coils, fuel injectors, relays, electric motors and parasitic draw.
  • The AC/DC current measurement is non-intrusive.
Check Stock

Fluke i410-KIT AC/DC Current Clamp and Carry Case Kit

  • Kit includes i410 1-400A AC rms, 1-400A DC current Clamp, zippered vinyl carry case with moveable divider.
  • Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM.
  • Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals.
  • 1mV/Amp output guarantees easy reading on your meter.
  • Take accurate current readings without breaking the circuit.
Check Stock

Digital AC DC Inrush Current Clamp Multimeter 6000 Counts TRMS Auto Range DMM Meter for AC/DC Volt Amp Ohm Temp Duty Hz Multi-Tester for Voltage Current Resistance Capacitance ANNMETER AN-570N

  • ▶【AC & DC Clamp Amp Multimeter】-DC voltage 0.1mV~1000V.
  • ▶【Multifunction Avometer】The 6000 Counts True RMS Clamp Voltmeter support Data hold, Max/Min, Relative Value, Automatic shutdown, ℉/℃....
  • ▶【Large Jaw Design】 The Clamp Meter can measure the AC Current in a conductor up to 42mm(1.65inch) without interrupting the circuit.To measure....
  • ▶【Inrush Amps Meter】 Press "REL" key for 2 seconds to enter the inrush current measurement mode, helps you know the peak current for starters,....
  • ✅【Extended 12 Months Quality Warranty】The clamp-on amp meter can check both AC & DC amperage without breaking wires. IEC1010 CAT III 1000V rated....
Check Stock

AUKUYEE Updated 2.4\ TFT Digital Oscilloscope Kit with Power Supply and BNC-Clip Cable Probe Q15001 (Assembled Finished Machine)

  • Fast Sampling Speed: A / D sample at 2.5M ksps with a built-in 4000 count Double A / D combination. Silent mode and one-key transformation of the waveform in operation during the measurement. DC voltage 1000V, AC voltage 750V, DC / AC current 40A, resistance 40MW, capacity 10mF, frequency 10MHz, diode / continuity test. remote test..
  • High Performance: With DC / AC current measurement function, accurate display of DC-AD waveforms. Automatic waveform capture function, display hold, save / read up to 10 waveforms and 100 sets of readings, with panel calibration technology, more reliable, since the calibration factor is set inside and there is no need to adjust potentiometers..
  • DSO Trigger Mode: Auto/Normal. DSO Automatic Measurement: VPP, Vmax, Vmin, Vavg, Vrms, Frequency.You can lock and save the waveform of a non-periodic signal..
  • 5 Colors test leads: The 5 colors test leads are handy for keeping track of wires when testing multiple things, helping you distinguish one from another visually. Alligator leads are handy for most light electronics works such as experiments, breadboarding, prototyping or diagnosing faulty safety switches..
  • Automatic shut-off & LED backlight & Screen: When the device is not in use, it automatically shuts down after 15 minutes (c....
Check Stock

OWON HDS242 Handheld Digital Oscilloscope Multimeter 2CH USB TypeC 40MHz 3.5 LCD Test Meter

  • Storing 100 sets of data and 10 waveforms independently. Capable of holding waveform and data during measurement, easy to view and analyze. Displaying historical data and real-time measurement on the same screen with particular record reading mode for easy comparison..
  • Digital multimeter with 200K high-speed A/D sampling, 4000 counts auto-range, one-button switch of graphical waveform display during measurement. High reliability with panel calibration technology and memory calibration, sparing the need for adjustment with potentiometer..
  • Analog broadband range up to: D AC ~ 10kHz, Display hold, storage / readout up to 5 waveforms and 100 sets of measurement values. 128X64 high contrast LCD with LED backlighting. Suitable for working at night. DETECTION ALSO Protect safety.convenient for small capacitors to measure quickly..
  • DC voltage 0 ~ 1000V, AC voltage 0 ~ 750V, DC/AC Current 0 ~ 20A, Resistance 0 ~ 20MΩ, Capacitance 0 ~ 20μf, Frequency 0 ~ 200KHZ, Diode / Continuity Test, Remote control test。 AC voltage bandwidth up to 20KHz. Innovative design for the one-key silent mode, quiet in mastery. Extending battery life with automatic shutdown function..
  • Built-in 500V/20A explosion proof fuse, 20A AC and DC test. 0mf gear position: high capacitance and ....
Check Stock

Siglent Technologies SDM3065X 6 ½ Digit Digital Multimeter, DMM

  • Real 6½ digits readings resolution (2,200,000 counts).
  • Comes with easy,convenient and flexible any sensor measurement control software: EasyDMM.
  • Standard interfaces: USB Device, USB Host, LAN (Optional Accessories: USB-GPIB Adapter).
  • DC Voltage: 200 mV - 1000 V, DC Current: 200 μA - 10 A, AC Voltage: True-RMS, 200 mV - 750 V, AC Current: True-RMS, 200 μA - 10 A..
Check Stock

UNI-T UT61C Digital Multimeters Auto RangeAC, RS232,USB interface,LCD Backlight Test Temperature

  • Automatic Range Design, It is Excellent for Measurement.
  • Fit For Schools, Factories, Families, and Amateur Wireless Lovers.
Check Stock

Fluke 365 Detachable Jaw True-RMS AC/DC Clamp Meter

  • 200 A ac and dc current measurement with detachable jaw.
  • Detachable jaw makes accessing wires and viewing the display easier.
  • Compact design fits in your hand and can be used while wearing protective equipment.State of the art signal processing allows for use in noisy....
  • Built in flashlight/torch allows for easy illumination and identification of wires.
Check Stock

Fluke 373 True-RMS AC Clamp Meter

  • AC/DC current measurement from 0.001 up to 100 A. which makes it a great tool for measuring parasitic draws and AC/DC voltage measurement up to 600 volt.
  • Small jaw: 1.2 inches (W) x 0.53 inches (D) (300x13.4millimeters) with clamp opening up to 1/2 inch (12.5 millimeters).
  • Peak and Data hold functions with one rotary switch operation.
  • 2 readings per second sampling and continuity check with audible indicator.
  • Test leads soft carrying deluxe pouch and batteries included.
Check Stock

Fluke - Fluke-279FC/IFLEX 279FC Digital Multimeter with Built-In Thermal Imager with Iflex

  • Full-featured Multimeter with built-in thermal imager.
  • 15 measurement Functions including: AC Voltage with low-pass filter, DC Voltage, resistance, continuity, capacitance, diode test, min/max/Average, AC current (with I flex), frequency.
  • Thermal imaging reveals many electrical issues quickly and safely, eliminating the need for time-consuming testing and validation.
  • I flex expands your measurement capabilities–get into tight, hard to REACH spaces for current measurement (up to 2500 a AC).
  • Fluke connect compatible - save measurements and images while communicating wirelessly with a Smart phone up to 20 feet/6.1 M away (No obstructions).
Check Stock