ReviewsDeck Screw

FibroPRO® Stainless Steel In Ground Swimming Pool Ladder with Easy Mount Legs (3 Step)

  • Stainless steel steps with non slip rubber pads.
  • Screw on deck installation, screws and anchors included.
  • All stainless steel hardware and escutheons included.
  • No need to break the deck. Bolts right on.
Check Stock

Wanhork Heavy Duty 304 Stainless Steel Patio Umbrella Holder,Deck Umbrella Holder,for Outdoor Fixed Deck Railing Post Range/3in-6in Umbrella Deck Mount Post Black

  • STURDY AND DURABLE - The Sun Umbrella Base Made of Heavy Duty 304 Stainless steel material with high temperature powder coating, waterproof and rust....
  • APPLICABLE: The Deck Patio Umbrella Holder is suitable for most Wooden and Iron Deck Railing Post, The Umbrella Base can be firmly fixed to your Deck....
  • SIZEWEIGHT: Tube inner Diameter / 1.53" (The Device is suitable for Sun Umbrella larger than 1 "and less than 1.53" in Diameter) , Deck Railing Post....
  • EASY TO INSTALL: Deck Umbrella Clip set includes all accessories, No tools required, you just need to assemble step by step while hand tightening the....
  • SET OF ACCESSORIES: 1 Tube frame Column, 4 pieces of clamps and all the included screw accessories (All Stainless Steel).We work hard to provide our....
Check Stock

NEIKO 50484A Internal Hex Allen Set Screw Assortment Kit, Coarse and Fine Thread Screws with Full-Steel Construction, 200-Piece Set

  • ASSORTED SCREWS SET: Our Internal Hex Allen Set Screw Assortment Kit has the screws you need for any task. This 200-piece screw kit includes standard SAE sizes for your convenience. Use these sturdy, small screws for personal or work projects..
  • HIGH-QUALITY STEEL SCREWS: Each screw in this screw set is constructed with durable steel that won’t strip as easily as plastic or aluminum. These heat-treated and hardened steel screws provide a strong hold..
  • HEX ALLEN SCREW SET APPLICATIONS: With the included SAE screw assortment, you can use these fasteners anytime, anywhere. Build a deck, frame wood, install plywood, and work with confidence with this versatile hex Allen screws assortment..
  • EASY STORAGE & TRANSPORT: Our screw set assortment kit includes 3 fine thread sizes and 9 coarse thread sizes. It comes with a hard plastic case with an organizational chart inside the lid to help you identify which screw you need..
  • SIZES: This set includes the following SAE sizes: coarse 5/32" x 3/16.
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

  • ▼ 50-Pack. ▼ Black stainless steel screws (Hardness class #12.9 + Dacromet black coating) are included. Saving time and money. ▼ Made of anti-UV engineering Nylon plastic. No corrosion. ▼ Includes 1 Square Driver Bit: Size 0.09″ x 0.09″ (2.3mm x 2.3mm).
  • ▼ Clean-look and consistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resti....
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

  • ▼ 100-Pack. ▼ Black stainless steel screws (Hardness class #12.9 + Dacromet black coating) are included. Saving time and money. ▼ Made of anti-UV engineering Nylon plastic. No corrosion. ▼ Includes 1 Square Driver Bit: Size 0.09″ x 0.09″ (2.3mm x 2.3mm).
  • ▼ Clean-look and consistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be rest....
Check Stock

Senco ORGL74383 DuraSpin Collated Deck Screw NO 8 x 3 in Steel Weatherex

  • Dura spin collated deck screw, 8 GA screw, 3 in length under head.
Check Stock

MaxSen 8 Inch Center Deck Mount Double Handle Spray Value Commercial Pre Rinse Restaurant Kitchen Faucet With Pot Filling Add On Spout (8 Inch Centersize)

  • 【8" Center Commercial Faucet】Low Profile Pre Rinse unit with Eccentric Flange, fit for centerset 7 3/16"(196mm) - 8 5/16"(212mm). Heavy Duty Construction Commercial Deck Mount Kitchen Sink Faucet With Brass Compression Cartridge to prevent cross flow..
  • 【Easy Installation】Built-in water sealing washer , no need to apply PTFE tape. Repair Kit ( spare washers and screws) and Deck Mount Install Kit Included..
  • 【25" Height Commercial Style Faucet】 with 1.42GPM Powerful Pre Rinse Spray Valve."No Screw" Design , Avoiding Latent Leakage Problem Caused by Corroded Screw..
  • 【Heat Resistant Steel Flexible Hose】Durable Stainless Pressure,With Food Grade Polyurethane Inner Tube.
  • 【8 Inch Swiveling Add On Spout】 for Complete Assess of Kitchen Sink.
Check Stock

ADIIL 20 PCS Q Hanger Hooks with Safety Buckle, Windproof Screw Hooks for Hanging Outdoor String Lights, Ceiling Hooks for Hanging Plants, Christmas Lights & Patio Lights, 2.2 Inches, Black

  • ..., the q hanger hooks are weatherproof and wind-resistant, perfect for hanging outdoor patio string lights. No worry about items being knocked off, more secure..
  • Sturdy & Strong: The outdoor light hooks are 2.2 x 1 inch, made of quality metal with black rustproof coating, suitable for indoor and outdoor use. Q hanger screw hooks are heavy duty and durable, can hold a good amount of weight up to 40lb, can last many years..
  • Easy to Install & Use: String light hooks are easy to install. You can screw the hooks into the wood by hand or with a wrench, or use an electric drill to drill a 0.24in hole in the concrete wall, plug the expansion tube into it, finally use a wrench to screw the hook in. Great for patio, roof, deck, ceiling, porch, balcony, tree, fence, and more..
  • Widely Used: Outdoor hanging hooks are windproof, strong, and permanent. You can use them literally anywhere! Perfect for outdoor string lights, patio lights, Christmas lights, plants, fairy lights, bird feeders and houses, flower pots, wind chimes, icicle lights, deck lights, mugs, and decorations..
  • Risk-Free Purchase: Package Includes: 20 PCS screw in hooks and 20 PCS plastic tubes. If there is any problem with our products, please contact us without hesitation, and we will solve the pr....
Check Stock

U-Turn - #8 x 1-5/8 WAR Coated Deck Screw 5 LBS ACQ Rated Flat Head with Nibs Type 17 Point T-20 Star Drive 850 PCS

  • 1-5/8" - Great length for many applications as a fence screw or a deck screw..
  • WAR COATING - Provides high resistance to corrosion. 1000 hrs salt spray rated Used outdoors for HIGH.
  • NIBS - Under head of screw make this a great screw for HARDER WOOD. Nibs cut the top layer of material which aids in providing a FLUSH COUNTERSUNK....
  • T-20 TORX DRIVE - Prevents cam out and IMPROVES DRIVABILITY, which can add years to the life of your project due to tighter connections. Also provides....
  • TYPE 17 POINT - Allows the screw to capture wood chips and REDUCES WOOD SPLITTING..
Check Stock

#8 x 1-1/4 Deck Screws 316 Marine Grade Stainless Steel Square Drive Type 17 Wood Cutting Point Quantity 100 Size Number 8 x 1-1/4 Long by Fastenere

  • Screw Size #8 (0.164") - Straight Pilot Drill size for Soft Wood 7/64 . Straight Pilot Drill size for Hard Wood 1/8.
  • Screw length measured from top of flat to tip of screw 1-1/4" (1.25") - Screw head Diameter 0.340".
  • Made of highly corrosion resistant 316 Marine Grade Stainless Steel. Type 316 is also used extensively for surgical implants within the hostile environment of the body..
  • Deck screws have a type-17 (auger type) thread cutting tip for installation into decking materials. They have bugle heads that allows the screw to depress the wood surface.
Check Stock

Hpycohome Bird Bath for Outdoors Horizontally Stable Durable Large Capacity Birdbath for Deck Mount with Adjustable Metal Clamp for Garden Patio Lawn Decorative

  • ...e edges to allow birds to perch easily..
  • Easy to Install and Clean: No tools required for Hpycohome deck bird bath installation, insert the S-shaped metal clips into the corresponding jacks in the bird bath bowl, clamp the bird bath to your own patio deck, and you've got a perch the birds will love! Easy to clean, unscrew the screw knob and easily remove the bird bath from the deck for cleaning, simple and quick..
  • Enjoy Bird Watching: Hpycohome Deck bird baths decorate your garden and attract more feathered friends to come and perch, adding vibrancy to your garden. Prepare some afternoon tea snacks and enjoy bird watching on the patio with your friends..
Check Stock