ReviewsDecode Receiving Module

IZOKEE CP2102 Module USB to TTL 5PIN Serial Converter Adapter Module Downloader for UART STC 3.3V and 5V with Jumper Wires

Designed to be used for USB to TTL electronic projects..
Supports full range of STC single-chip microcomputer with output voltage 3.3V and 5V..
Perfect support for the highest baud rate up to 115200 bps..
Module has status indicator light, sending and receiving indicator lights. After the driver is correctly installed, the status indicator will be on, the sending and receiving indicators will flash when communicating, and the higher baud rate, the lower brightness..

The master-slave module has three functions of transparent transmission, remote control and PIO acquisition. It can be switched and set through the AT command set. It is easy to use the same as the Bluetooth serial port module you have used before, without changing the PCB and the lower computer program..
Support AT command, users can change the serial port baud rate, device name, pairing password and other parameters as needed, use flexible..
Support UART/I2C interface, and support SPP Bluetooth serial port protocol, has the advantages of low cost, small size, low power consumption, high sensitivity of sending and receiving, etc., only need to be equipped with a few peripheral components to achieve its powerful functions..
This module is mainly used in the field of short-distance data wireless transmission. It can be easily connected to the Bluetooth device of the PC, or the data between the two modules can be intercommunicated..
When the Bluetooth connection is not established, the baud rate, name, and pairing password can be set by the AT command. After the setting, the parameter is saved after power-off, and the Bluetooth connection automatically switches to the transparent transmission mode..

TCRT5000 infrared reflection sensor, infrared emitting diodes constantly emit infrared rays.
Widely used for pulse data sampling of watt hour meter, paper detection of fax shredder, obstacle detection, black and white line detection.
also it provides a versatile infrared detection system solutions for automation machinery devices.
When object is in detecting range, infrared ray will be reflected back with high intensity, the module outputs high level and indicating diode is on.
when the infrared ray emitted is not reflected back or intensity is not high enough, the infrared receiving tube is in the off state and module outputs low level,while indicating diode is off.
Black line low output, white line high output.

Hardware Function: Data Filter, Noise Filter, Width Trig, Trig Delay.
Software Function: Bus Decode, Packet List, Bus Data Export, Bus Packet Trig, Move Synchronously, Bus Analog Display.
Bus Decode: I2C, SPI, UART, I2S, PS2, 1-Wire, USB 1.1, S/PDIF, SD, CAN Bus, Lin Bus, 3-Wire, Microwire, SSI, Miller, Manchester, SM Bus, Modbus.

...dual antennas, 1Mii B03Pro Bluetooth transmitter receiver can achieve a range of up to 265ft (80m) line-of-sight in open air and up to 80-110ft (25-35m) indoors. *NOTE: Operation range can be affected by Wi-Fi routers, Wireless TV adapters, physical obstructions like walls, metal obstacles etc. and also depended on receiving device..
【No Lip Sync Delay & Dual Stream】AptX Low Latency technology eliminate Bluetooth audio delay, Long Range adapter 1Mii B03Pro supports dual link Simultaneously, Pair with two Bluetooth headphones or two Bluetooth speakers & BOTH enjoy ultra-fast audio streaming. ** To achieve low latency ( 003c40ms delay), your receiving device must also support AptX Low Latency, or you may experience a 70-220ms delay**.
【Mindless Operation】 No need to be a tech junkie. Simply plug audio cable and press the power button to start, the Bluetooth adapter will detect your BT device easily. Compatible with 99% of TVs, BT headphones or speakers, Home stereo system, supports Optical, AUX, RCA Audio outputs / inputs..

▶MQA DAC: D90se is a new D90 decoder with better performance and wider support for MQA. OPT, COAX, USB and AES can support MQA rendering and decoding..
▶Bluetooth 5.0 LDAC transmission: D90SE has the certification of hi-res Audio Wireless and LDAC. It uses CSR8675 chipset to support LDAC/AAC/SBC/APTX/APTX LL/APTX HD protocol. To get even better sound quality from Bluetooth, we abandon the built-in DAC of CSR8675 and connect it's digital signal to ES9038PRO to decode..
▶Selectable output: D90SE has balanced XLR output and single ended RCA output. You can choose " XLR only" "RCA only" or "XLR + RCA " output to for different applications..
▶Plug and play: D90SE has a wide range of compatibility, Windows 10, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications,you need to install the driver and set it up..
▶A90 will be the best headphone amplifier for D90SE: Full balanced NFCA module, 0.2uV ultra low noise. 0.00006% ultra low THD + N0.1 ohm output impedance, wide gain setting high output voltage, almost suitable for driving all kinds of headphones..

30% greater active noise reduction than conventional aviation headsets. Connectivity Technology: Wired/Wireless.
30% less clamping force than conventional aviation headsets. The ergonomic control module includes an auxiliary audio input with intercom/AUX priority....
Clear audio with active equalization. Simple, intuitive headset operation plug it in, turn it on, go flying.
Now with Bluetooth audio and communications interface for connectivity with your communications and navigation devices.
Customizable audio prioritization control lets you mute an audio signal when receiving a communication, or mix the two together.