ReviewsDeep Groove Bearing

FGen 100pcs Low Noise Motor Dedicated 608RS Skateboard Bearing Fingertip Gyro Special Bearing Red

  • Bearing material: bearing material is divided into bearing steel, high carbon steel, low carbon steel, sealing material is divided into iron cover and....
  • Bearing model: 608RS bearing length: 8mm * 22mm * 7mm, with skateboards, skates, roller skates, long, electric skateboard, the highest precision in....
  • Deep groove ball bearings are mainly subjected to radial loads and can also bear both radial and axial loads. When it is only subjected to radial....
  • This type of bearing has small friction coefficient, high speed limit, simple structure, low manufacturing cost and easy to achieve high manufacturing....
  • Dimensional range and form vary, used in precision instruments, low noise motors, automobiles, motorcycles and general machinery, etc. It is a widely....
Check Stock

CNBTR U-Type Pulley Wheel with Steel Bearings 8mm Shaft Hole 45mm Diameter for Max-Load 167kg Pack of 4

  • Overall size: outside diameter 45mm/1.77in.
  • R=3mm/0.12in. Please check carefully the size before purchasing..
  • Bearing Model 608ZZ Mini Deep groove ball bearings, fashionable, slide flexible, compression wear.Smooth motion, high printing precision, low noise, can greatly improve the printing speed..
  • Ideal for replacement roller of sliding window, door, printer machine etc..
Check Stock

RLS5ZZ Shielded Bearing 5/8 x 1 9/16 x 7/16 inch Ball Bearings

  • Single-row, deep-groove ball bearing for applications supporting high speeds, moderately heavy radial loads, and thrust loads in both directions.
  • Small bearing for fitting small shaft diameters.
  • Metal shields on both sides of the bearing keep the lubricant in and contaminants out.
  • Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise.
  • Normal radial internal clearance for applications where thermal expansion is not a factor.
Check Stock

Antrader 10Pcs 608 Steel Ball Bearing 8mm x 22mm x 7mm High Precision Rating Fidget Spinner Bearing

  • 10pcs 608 Steel Ball Bearing, open type design unsealed ball bearing..
  • High rotation speed with less coefficient of friction, less vibration and noise..
  • 8mm x 22mm x 7mm Fidget Spinner Bearings. Inner Diameter: 8mm.
  • These 608 deep groove ball bearing is a single-row bearing that supports radial loads, made with Chromium Steel providing superior quality and durability..
  • Suitable to use in skateboards, longboards, inline skate, scooter, tri-spinner fidget toy hand spinner and more..
Check Stock

BZlamp 608RS 10 Pack Deep Groove Ball Bearing, Black Rubber Shielded, 8 x 22 x 7 mm Replacement for Scooters Roller Skate Longboard 3D Printer RepRap Wheel Skateboard Bearing ABEC-7 Grade

  • [Package Information] Bearing Model Type: 608RS. Package Content: 10 Pack 608RS Deep Groove Ball Bearing..
  • [Bearing Dimension] Outer Diameter = 22 mm.
  • [Bearing Material] This 608RS bearing is made of Bearing Steel..
  • [Product Information] Precision Grade: ABEC-7. Exterior Design: Double Metal Seals. Lithium Grease Range:  -30°C ~ +110°C.
  • [Application] Replacement for Scooters, Roller Skate, Longboard, 3D Printer RepRap Wheel, Skateboard, etc..
Check Stock

ANYURAN Wind Spinner, Premium Kinetic Wind Sculpture Metal Windmill 360 Degree Swivel Antique Steel Metal Finish for Outdoor Yard Patio Lawn & Garden

  • Anti-rust process: The surface protective film isolates the air, is durable, the color is delicate, the lacquer transition is natural, the color is fresh and not easy to fall, and it is durable..
  • Double-sided rotating design: "Peacock Feather" subverts the traditional windmill shape. The double-layer "feathers" can be rotated in reverse. The breeze blows and dances, weaving a dream fairy tale in the wind..
  • Blade edge passivation: The blade edge is passivated and anti-rust treatment, which effectively reduces the damage caused by accidentally touching the high-speed rotating blade, and at the same time makes the blade more round and full.
  • Iron cover sealed deep groove ball bearing: adopts imported technology iron cover sealed deep groove ball bearing, which can effectively prevent dust from entering. Suitable for various climatic environments, smooth, quiet, wear-resistant, and can rotate at the wind level of stable leaf swing.
  • Perfect garden decoration: the garden wind rotator can light up the night and add a little atmosphere to the terrace, backyard and lawn. The bright metal and reflective paintings create a visual experience for holiday decorators in the garden. It is also an ideal gift for garden lovers..
Check Stock

N127530 Replacement Miter Saw Ball Bearing for DeWalt N127530 DW708 DW716 DW717 DW718 DWS780

  • N127530 Replacement Miter Saw Ball Bearing.
  • for DeWalt N127530 DW708 DW716 DW717 DW718 DWS780.
  • for DeWalt N127530, 605040-32 and 330003-48..
  • 6302-2RS 6302ZZ Deep Groove Ball Bearing Fully Suitable Replacement.
Check Stock

Yellow Jacket Premium Skateboard Bearings, Pro Longboard Bearings, 608, ABEC 11, Bomber Blue (Pack of 8)

  • 10pcs 608-2RS ball bearing 8x22x7mm, rubber sealed deep groove..
  • This 608RS bearing Shields on both sides keeping lubricant in and contaminants out..
  • Material: Carbon steel, durability and resistance to deformity under heavy loads..
  • Ideal for moderate load uses: Motor,skateboards, inline skates, scooters, and other skating applications..
Check Stock

[10-Pack] 5201-2RS - Deep Groove Radial Ball Bearing 12 mm x 32 mm x 16 mm ID x OD x Width Double Rubber Seal

  • ✔️ [Bearing Type] - Deep Groove Radial Ball Bearing.
  • ✔️ [Dimensions in inches] - 0.472" (Inner Diameter) x 1.260" (Outer Diameter) x 0.630" (Width).
  • ✔️ [Dimensions in Millimeter] - 12 mm (Inner Diameter) x 32 mm (Outer Diameter) x 16 mm (Width).
  • ✔️ [Quantity in Package] - 10 Pieces of Ball Bearing.
Check Stock

30 Pieces Skateboard Bearings Ball Bearing Deep Groove Ball Bearing Double Rubber Bearings Sealed Bearing for Skateboards, Inline Skate, Roller Blade Skates, 8 mm x 22 mm x 7 mm (608RS)

  • Package includes: you will receive 30 pieces rolling bearings, black double rubber sealed deep groove, enough quantity to meet your daily requirements for usage and replacement.
  • Serviceable material: sealed bearing is made of alloy steel , reliable in quality, not easy to deform and rust under heavy load.
  • There are protective Shields on both sides to keep lubricant in and contaminants out.
  • Size production: the inner diameter of the skateboard bearings is about 0.32 inch/ 8 mm, the outer diameter is about 0.87 inch/ 22 mm, and the width is about 0.28inch/ 7 mm, proper size is suitable for most mechanical products.
  • Low noise and fast speed: deep groove ball bearings have low noise and fast rotating speed, even applied under high temperature and high load, they will not affect the use effect, suitable for various applications and can serve you for a long time.
  • Widely applied: the ball bearing is suitable for skating applications such as skateboards, inline skates, skates and scooters, and can also be applied for 3D printers, CNC, EMAX, and so on.
Check Stock

Tonmp 100 PCS 608-ZZ Ball Bearing – Double Metal Sealed Shielded Miniature Deep Groove Bearings for Furniture Wheel,Skateboards, Inline Skates, Scooters, Roller Blade Skates (8mm x 22mm x 7mm)

  • Package includes: you will receive 30 pieces rolling bearings, black double rubber sealed deep groove, enough quantity to meet your daily requirements for usage and replacement.
  • Serviceable material: sealed bearing is made of alloy steel , reliable in quality, not easy to deform and rust under heavy load.
  • There are protective Shields on both sides to keep lubricant in and contaminants out.
  • Size production: the inner diameter of the skateboard bearings is about 0.32 inch/ 8 mm, the outer diameter is about 0.87 inch/ 22 mm, and the width is about 0.28inch/ 7 mm, proper size is suitable for most mechanical products.
  • Low noise and fast speed: deep groove ball bearings have low noise and fast rotating speed, even applied under high temperature and high load, they will not affect the use effect, suitable for various applications and can serve you for a long time.
  • Widely applied: the ball bearing is suitable for skating applications such as skateboards, inline skates, skates and scooters, and can also be applied for 3D printers, CNC, EMAX, and so on.
Check Stock