ReviewsDeep Hole Drill Bits

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2348 drill bit set hex shank.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
Check Stock

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits desi....
Check Stock

Core Drill Adapter 5/8 Threaded Arbor Diamond Hole Saw 5/8 inch - 11 to 1/2 Shank Sanding Attachment Arbor Shaft Adaptor Heavy Duty

  • HEAVY DUTY Core Drill Adapter for 5/8-11 thread to straight 1/2 inch shank..
  • Core Bit Adapter converts 5/8" - 11 Thread to 1/2 inch Straight Shank.
  • Heavy Duty - Twist Resistant Alloy- Most Diamond Core Masonry Bits, tile drill bits, stone polishing kit, granite polishing kit, diamond polishing pads, diamond cup grinding wheel, grinding stone for drill and Back Holders are 5/8 inch - 11 threaded adapter for core bits.
  • Standard drill chuck adapter or core drill bit adapter will help you use your own standard drill with drill grinding bit and drill bit core. Connects to 5/8" 11 Female Threaded Tools, Core Bits, Hole Saws - Makes them a 1/2 inch Shank as a drill shank adapter.
  • Drill bit adapter for granite, concrete, glass, brick. Use your diamond core bits for granite or diamond hole saw for grinder with standard drill. Now you can use sanding, cutting and polisher tools with standard chuck shank with our adapter for core bits.
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to dri....
Check Stock

Left Hand Drill Bit Set (10 pc, Silver & Gold), Metal Extractor Bits to Remove Stripped Broken Screws & Bolts w/Iron Storage Case by Mata1

  • HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness.
  • Suitable for removing hardened, damaged, rusted & painted-over screws or bolts.
  • HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling.
  • CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife.
  • DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt.
  • Insert left-hand drill bit into drill & set drill to reverse.
  • Drill a hole about 1/16” deep into the screw/bolt.
  • Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt.
  • Use drill, wrench, or tap handle to thread the screw bolt out.
  • HANDY GADGETS – Mata1 is committed to provide lasting quality tools.
  • Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws.
Check Stock

1 3/8 Diamond Hole Saw Core Heavy Duty Diamond Drill Bit Concrete Granite Quartz Porcelain Slab Countertops Ceramic Tile Brick Brazed with 5/8″-11 Thread 1-3/8 in

  • Heavy duty. pro grade, vacuum brazed diamond hole saw for quartz, granite, concrete, cinder block, brick drilling..
  • Diameter is 1-3/8 inch with 5/8 inch – 11 threaded connection, maximum depth of cut is 1-3/8 inches..
  • Diamond vacuum brazed commercial grade, long life diamond core drill bit hole saw. For heavy duty professional applications..
  • Tile core bits used with core hole drill tools with 5/8 inch -11 threaded angle grinder or other tools..
  • Commercial grade, professional quality heavy duty diamond bits for drilling stone, diamond hole saw bits, diamond drill bit for granite bits for drill.
Check Stock

Diamonds (Marble Vinyl)

  • 【Glass Drill Bit】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. Fine workmanship and super wear-resistant, sharp.
  • 【High Quality Drill】Each hole is treated with smooth and accurate surface treatment,and the top oh the hole is thickened to achieve excellent cutting strength.
  • 【Tile Hole Saw 15 Sizes】 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20/ 22/ 25/ 26/ 28/ 30/ 40/ 50 mm，to meet various demands.
  • 【Wide Usage】Used on Drill Glass,Wood,Tile Bottles,Blocks Jars, Ceramic,Slate Mable, Granite Light Stone, and other hard surfaces.
  • 【Attention】Please keep adding water when the diamond drill bits are working on the glass or ceramics.low drill pressure and increased use of water lubrication will extend drill bit life..
Check Stock

Ryobi P721 One+ 1,800 Lumen 18V Hybrid AC and Lithium Ion Powered Flat Standing LED Work Light with Onboard Mounting Options Battery and Extension Cord Not Included Light Only

  • KIT INCLUDES: 19 x Split Point Oxide Drill Bits, 1 x 1” Hex Shank Spade Bit, 4 x Carbide Tipped Masonry Drill Bits, 4 x Brad Point Drill Bits, 1 x....
  • BLACK OXIDE COATING keeps some of these bits protected from corrosion and prolonged wear.
  • HOLE SAW MANDREL holds a hole saw and drill bit in place so you can bore holes for door knobs or locks with a power drill.
  • MAGNETIC BIT HOLDER holds drill bits for driving fasteners without a tool.
  • CARRYING CASE has mounting brackets and a handle for maximum storage and portability.
Check Stock

Greenworks 24V Brushless Cordless Variable Speed Drill Kit, Batteries and Charger Included, with 90-Piece Impact Rated Driving Bit Set

  • Greenworks 24V Lithium-Ion battery provides 20% more power and 35% more run-time versus 20V competition, and delivers fade-free power with no memory loss after charging.
  • 2 speed transmission (0-380RPM/0-1450RPM), 310 in-lbs (35Nm) torque, 18 + 1 position clutch with 1/2 in. keyless chuck offers better torque adjustment for drilling holes and driving screws in a variety of materials..
  • Compact drill weighs only 3 lbs for use in tight workspaces..
  • Highly efficient brushless motor provides more power, torque, quiet operation, and longer motor life.
  • SET INCLUDES: 21x 135° Split Point Black Oxide Drill Bits，4x hex shank spade bit，8x Hex Shank Nut Setters，1xMagnetic Bit Holder, 27x 1 in. Insert Bits，4x Drill Stops， 1x Countersink, 1x Center Punch, and 1x Hex Key， 6x 2 in. Power Bits,5x carbide tipped masonry drill bits,5x black and silver brad point drill bits,4x hole saws,1x hole saw mandrel, 1xCarrying case..
  • Widely USED:Suitable for drilling wood, metal, plastic, and masonry..
  • STORAGE:The plastic carrying case comes with a locking system and labeled compartments to keep your bits organized upon purchase..
  • MAGNETIC BIT HOLDER: magnetic bit holder holds drill bits for driving fasteners without a tool..
Check Stock

AVID POWER Drill Bit Set, Drill Bits for Metal, Wood, Masonry-100Pcs Titanium, High Speed Steel Drill Bit Screwdriver Bit Set with Storage Case

  • All-in-one Convenience: The AVID POWER 100-piece drill bit to work on a wide range of projects, this drill bit set is made for wood, metal, masonry, and plastic drilling as well as multiple screw driving and fastening applications..
  • Long Life and Added Durability: High-speed steel titanium drill bits run cooler, drill smoother, and last up to three times longer than your standard drill bit set. Size and dimensions are marked on the drilling surface for easy identification..
  • Widely Use： A wide assortment of bits to face numerous jobs. 14 HSS drill bits, 9 wood drill bits, 9 masonry drill bits, and 56 screwdriver bits in a wide variety of sizes among other tool accessories to create a complete, all-inclusive drill bit kit. great for household and furniture repair..
  • Well Organized: The most popular sizes for common jobs with a storage case, easy to carry. Each drill slot is engraved with the correct dimensions for quick identification and avoids clutter..
  • What's Included: HSS drill bits*14, Wood drill bits*9, Masonry drill bits*9, Screwdriver bits*56, Spade drill bit*3, Hole saws*4, Nut driver bits*4, Countersink*1, Screwdriver bit holder*1.
Check Stock