ReviewsDeep Throat Clamp

Deep AF Numbing Throat Spray (Cinnamon)

Gently numb the throat and alleviate the gag reflex.
Directions Spray towards back of throat not on tongue for best results..
FOR HYGIENE/HEALTH PURPOSES ANY NOVELTIES RETURNED OPENED OR USED WILL NOT BE REFUNDED*.

Check Stock

2.5 Inch Inlet Exhaust Tip, Qiilu Tail Throat Glossy Carbon Fiber Red Pipe Straight 2.5in Inlet 3.5in Outlet Single Outlet

[ Applicable Model ] 6.4in total length, 2.5in inlet size and 3.5in outlet size, suitable for 2.4‑2.5in exhaust pipe.car..
[ Upgrade Appearance] Carbon fiber look, red inside, stylish and distinctive, perfect for decorating your car..
[ Quality Material ] This tail throat is made of high-quality stainless steel and carbon fiber, corrosion-resistant and heat-resistant, high strength, and durable..
[ Comfortable Driving ] Enhance the power, providing smoother exhaust, improve driving comfort and experience..
[ Easy Installation ] Put the carbon fiber tail throat directly on the exhaust pipe of the original car, and use a wrench to tighten the clamp screw until the tail throat cannot be pulled out.（Please note that this product with logo）.

Check Stock

Olympia Tools 3-Way Edging Clamp 38-192,Black

3-WAY EDGING CLAMP: This 3-way edging clamp is ideal for your workshop. It features a malleable iron reinforced frame with a black oxide spindle and handle for durable & strong hold & even pressure.
ERGONOMIC DESIGN: This clamp is ideal for easy and secure fitting of moldings and trim. It features heavy duty swivel saddles and a throat depth of 2.75".
MADE TO LAST: Our durable and long-lasting tools help you with home, garage & industrial projects. With professional-grade quality, easily repair & fix issues with our tool cabinet essentials..
THE RIGHT TOOL FOR THE JOB: We engineer a range of bolt cutters, clamps, chisels, folding carts, hammers, pliers, saws, screwdrivers, tape measures, utility knives, vises, bolt cutters, saws & wrenches..
SUPERIOR INSTRUMENTS: Olympia Tools provides quality & innovative hand & specialty tools, tool accessories & outdoor equipment for construction, woodworking, mechanical maintenance & home repair..

Check Stock

POWERTEC 71409 Quick Screw Guide Rail Clamp for MFT and Guide Rail System 7” Capacity x 2-3/8” Throat Depth – 2 Pack

INCLUDES: (2) Quick Screw Down Clamps with 7" Max Opening, 2-3/8" Throat Depth.
PREMIUM DESIGN: Features high quality and ergonomic plastic clamp handle grips for quick and comfortable tightening, without the splinters from cheap....
SUPERIOR CLAMPING FORCE: Delivers consistently secure placement and safe clamp action for a seamless workflow.
VERSATILITY: These rail clamps provide a portable clamping option for Festool, Makita, Bosh and similar sized track saw guides, perfect as MFT clamps....
PLEASE NOTE: The clamp ends have a specific profile, see the image for details. They are designed to work with MFT tables, the track saw guides listed....

Check Stock

HNBun 4Piece 6inch C-Clamp, Malleable Iron Heavy Duty C-Clamp with Sliding Bar, 2-5/8-Inch Throat Depth Quick-Grip C Clamp for Woodworking, Welding, Automotive Repair, 6-Inch Jaw Opening

【Heavy Duty C Clamp Set】6inch C clamp made of high quality cast malleable iron, rust resistance and corrosion resistance, sturdy and durable.
black coated surface construction protects your clamps from moisture, preventing corrosion from damaging clamps.
【6in C Clamp】Maximum jaw opening: 6 inches.
【Multipurpose 6” C Clamp】Cast malleable iron frame with I-beam design keeps your C-Clamp from bending and warping allowing it to squeeze with more force.
heavy duty c clamp secures parts for assembly, fastening, gluing, and welding in woodworking, building, automotive applications and metalworking.
【Great Performance】Swivel jaw pad floats in a low-resistance ball-and-socket joint to apply pressure evenly to provide powerful and rigid clamping.
【Secure Clamp Tool】The malleable iron c-clamp allows for easy fastening to wood to hold it together while chiseling or sawing.
we offer 90 days full refund or free replacement if any thing quality problem occurs.

Check Stock

Pony 8510BP Cabinet Claw, 2-Pack

The Cabinet Claw Is An Unique Tool Which Combines The Multiple Steps Of Face Frame Cabinet Installation Into One Easy Process.
Clamp Specifications: Works On Stiles From 1-1/2 Inch To 2 Inch.
Minimum Opening: 2-Inch, Maximum Opening Capacity: 4-7/16 Inch.
Easy Use To Install And Highly Durable. Protective Pads Protect Cabinets From Becoming Marred During Installation.
Face Frame Stiles Can Be Tightened, Aligned, Pre-Drilled And Fastened While The Clamp Remains In Its Original Position.
A unique tool which combines the multiple steps of face frame cabinet installation into one easy process.
Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position.
Professional, quality installation is achieved at a fraction of the time compared to the use of more conventional clamps..
Protective pads protect cabinets from becoming marred during installation.
Installs two stiles from 1-1/2 inch to 2 inch width and up to 1-1/2 inch thickness (each) with 4 inch opening capacity.

Check Stock

Bessey CM34DR 3-Inch x 4-1/2-Inch Malleable Deep Reach C Clamp, Black and red

Designed for light general purpose & DIY projects.
Drop forged frame with bright Galvanized finish.
Swivel pad moves freely to adapt to various surfaces.
Extra deep throat allowing a wider variety of applications.
High tensile ductile body with hardened spindles and pads.

Check Stock

WEN CLR122 12-Inch Heavy Duty Steel Bar Clamps and Spreaders with 2.3-Inch Throat Two Pack Black

Features a 12-inch maximum jaw opening and a 2.3-inch throat.
Reversible design doubles as both a 12-inch clamp and a 17.25-inch spreader.
Rated for up to 150 pounds of force per clamp.
Features a heavy duty reinforced steel bar, a quick-release latch, and an ergonomic squeeze trigger.
Includes two hand clamps, each measuring in at 17.5 x 6.5 x 1 inches.

Check Stock

4Pack C-clamp 2 Inch Black C-Clamp Set Industrial Grade Strength C Clamps for Welding/Metal Workpiece/Woodworking/Building

☆ Premium C-clamps ☆: Made forged with high-quality malleable steel, with strong heat treatment.
Using solid cast iron, drop forged frame with....
☆ Size & QTY ☆ : Packing include 4pcs min C-clamp, 2-inch c clamp: 2-inch jaw opening & 1-inch throat depth.
☆ Easy Adjustments ☆ Trapezoidal thread screw, large torque, to ensure strong angle effect.
The threads resist rust and easy adjustments, smoothly....
☆ Flexible & Smooth ☆ : Sliding T-handle offers suitable maximum torque in order to reduce hand fatigue.
☆ Wide Application ☆ : This heavy-duty c clamp ideal for DIY crafting, sculpting, masonry, painting, metalwork, photography, etc..

Check Stock

Jorgensen 6 inch Bar Clamp Set, 4 Pack Steel F Clamp Light Duty, 300 lbs Load Limited, for Woodworking, Metalworking, DIY

Jorgensen Bar Clamp: The throat depth of this clamp is 2 inch, the maximum opening capacity is 6 inch. Ideal clamp set for woodworking, preventing your workpieces from slipping out of place during the bonding and fixing process..
Load limited: The bar clamp allows for the max pressure up to 300 lbs and a metal latching mechanism which minimizes the warping and distortion of the workpieces, suitable for household repairs and your other DIY needs. Comes with 4 pack clamps, providing more than 1200 pounds of clamping force on your workpieces..
Quick-Adjust Design: The multiple-disc clutch design allows the sliding head to hold security at any position along the bar clamp. And the fast-acting sliding head is threaded design, making the sliding head fixed firmly at any point on the rod..
Premium design: Ergonomic soft grip handle is threaded design, making it non-slip and comfortable. Fine-tuning the knob can increase the grip and precision. The soft and durable plastic pad protects your work piece, reduce the indents and does not damage the surface of the object..
Application: Designed for widely light-duty clamping project, suitable for hobbyist, carpenters, woodworkers, metalworkers and professional trades people of all types..

Check Stock

UFURMATE Hose Clamp with Carabiner 4 Sets 304 Stainless Steel Flag Pole Clips with Carabiner Clamp Heavy Duty Thumb Screw Key Hose Clamps Adjustable Worm Gear Clamps Diameter 18-32mm

【Durable Material】The hose clamp is made of high-quality stainless steel, which is strong and durable, not easy to rust and break, and has a long service life..
【Adjustable Clip】The hose clamps can be loosened or tightened by using the adjustable handle. The diameter adjustment range of the throat hoop is 18-32mm..
【Thumb Screw Design】The adjusting screw of the throat hoop is designed in the style of a thumb screw, which is more convenient to use, and the size of the throat hoop can be easily adjusted directly by hand..
【Easy to Use】No need for any other tools, just use the adjustable handle to fix the hose. Install the carabiner on the handle and hang the flag..
【Wide Application】Typically used for stationary duct work, dryer vents, hoses, pipes, cables, pvc pipes, etc..

Check Stock