ReviewsDependable Drilling

Worx WX352L.9 20V Power Share 1/2' Cordless Hammer Drill (Tool Only)

[THE POWER TO OUTPERFORM] Worx Nitro tools are engineered to provide greater power, performance, and runtime.
[BRUSHLESS MOTOR] Brushless motors are more efficient, run 50% longer, are 25% more powerful, and have 10% longer life.
[HEAVY-DUTY CHUCK] This hammer drill features 1/2 in., ratcheting metal chuck for superior bit retention.
[SAME BATTERY, EXPANDABLE POWER] The same battery powers over 75+ 20V, 40V, and 80V lifestyle, garden, and power tools in the Power Share family.
[ALL METAL GEARS] Dependable performance through the toughest jobs.
[2-SPEEDS] Variable two-speed gearing and 20+1+1 clutch settings to adapt speed and torque for best results.
[GRIPZONE] Comfortable, ergonomic design with micro-texture for optimum grip and comfort.
[VARIABLE SPEED] For easy starting, maximum ipm/bpm, and complete control of your drilling and driving.
stays lit for 20 seconds after trigger release.
[INCLUDES] Nitro Hammer Drill, Carry Bag, Double-end Screwdriver Bit, Belt Clip.

Check Stock

ARIES 204044 3-Inch Round Black Steel Nerf Bars, No-Drill, Select Chevrolet, GMC Blazer K5

CUSTOM CONTOURS. Each set of ARIES 3-inch nerf bars is custom-bent to contour to each unique vehicle body, adding functional footing and accenting your ride with aftermarket style.
NON-SKID STEP. These step rails are equipped with custom-positioned step pads, providing a dependable, non-skid step exactly where you need it.
RIGID TUBING. For reliable strength and enhanced rigidity, these step bars are constructed from 3-inch diameter, heavy-wall tubes. The tubes offer a sleek look for a stylish accent on the vehicle.
CORROSION-RESISTANT. These black nerf step bars are made from carbon steel to be high-strength. They also feature a black powder coat finish to maximize corrosion resistance and offer a sleek look.
NO-DRILL. These ARIES nerf bars mount with zero drilling required and fit select model years of the Chevy Blazer K5 and GMC Blazer K5.

Check Stock

CURT Class 3 Trailer Hitch Bundle with Wiring for 2008-2013 Toyota Highlander - 13534 56217

DEPENDABLE STRENGTH. This trailer hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component).
VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.Drilling not required.
RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Toyota Highlander.

Check Stock

ARIES 203012 3-Inch Round Black Steel Nerf Bars, No-Drill, Select Ford Explorer, Mazda Tribute

CUSTOM CONTOURS. Each set of ARIES 3-inch nerf bars is custom-bent to contour to each unique vehicle body, adding functional footing and accenting your ride with aftermarket style.
NON-SKID STEP. These step rails are equipped with custom-positioned step pads, providing a dependable, non-skid step exactly where you need it.
RIGID TUBING. For reliable strength and enhanced rigidity, these step bars are constructed from 3-inch diameter, heavy-wall tubes. The tubes offer a sleek look for a stylish accent on the vehicle.
CORROSION-RESISTANT. These black nerf step bars are made from carbon steel to be high-strength. They also feature a black powder coat finish to maximize corrosion resistance and offer a sleek look.
NO-DRILL. These ARIES nerf bars mount with zero drilling required and fit select model years of the Ford Explorer and Mazda Tribute.

Check Stock

ARIES 204044-2 3-Inch Round Polished Stainless Steel Nerf Bars, No-Drill, Select Chevrolet, GMC Blazer K5

CUSTOM CONTOURS. Each set of ARIES 3-inch nerf bars is custom-bent to contour to each unique vehicle body, adding functional footing and accenting your ride with aftermarket style.
NON-SKID STEP. These step rails are equipped with custom-positioned step pads, providing a dependable, non-skid step exactly where you need it.
RIGID TUBING. For reliable strength and enhanced rigidity, these step bars are constructed from 3-inch diameter, heavy-wall tubes. The tubes offer a sleek look for a stylish accent on the vehicle.
CORROSION-RESISTANT. These nerf step bars are made from 304 stainless steel to be highly rust-resistant. They also feature a bright, polished stainless finish for a mirror-like shine.
NO-DRILL. These ARIES nerf bars mount with zero drilling required and fit select model years of the Chevy Blazer K5 and GMC Blazer K5.

Check Stock

No Stud TV Wall Mount for 32-75 Inch TVs, No Drill Studless TV Drywall Mount with Max VESA 600x400mm Weight up to 150 lbs, Easy Install with All Hardware Included

...l x Vertical (the four holes on the back of the TV))..
STURDY ALLOY - Holding up to 150 lbs, the drywall tv mount is constructed from high quality alloy materials for the ultimate in durability and reliability to keeping your TV. Sturdy alloy construction delivers years of dependable use. The wall mount has a foam backing to keep the wall from scratch..
EASY INSTALLATION & NO EXPERIENCE REQUIRED - Mount your TV without studs on drywall. Each package includes detailed instructions and all mounting hardware for easy installation even with no experience! NOTE: The thickness of the drywall must not be less than 0.5 inch.
NO STUD, NO DRILLING - Hang your TV on the drywall in minutes, no studs, no anchors, no drills! The studless design of this no drill TV wall mount makes it easy for you to mount your TV to a drywall or plaster wall without the hassle of drilling or finding studs. Compatible with 32" to 55" TVs up to 150 lbs and has only 1.2" clearance from the wall..
SPACE SAVING - With a 1.2" profile from the wall, this studless tv wall mount provides a profess....

Check Stock

CURT 99302 Class 3 Trailer Hitch, 2-Inch Receiver, 4-Pin Wiring Harness, Select Toyota RAV4

DEPENDABLE STRENGTH. This trailer hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component).
VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.Drilling not required.
RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Toyota Highlander.

Check Stock

BESTAOO TJ Hood Latches, Locking Hood Latch Catch Kit for Jeep Wrangler TJ 1997-2006, Eliminates Hood Flutter, 1 Pair

★FITMENT - This hood latch is perfectly designed for 1997-2006 Jeep Wrangler TJ, including Rubicon Sahara Sport, will give your car a more cool look and sporty style..
★STRONG AND ADJUSTABLE ELIMINATE HOOD FLUTTER - Our hood catches are solid and dependable to end hood flip while you drive on the road, the hood latch can be kept in its original position even though on rough roads or in high winds. With lock to keep the car security..
★SOLID CONSTRUCTION - The hood latch is made of high-strength aluminum alloy to ensure lasting durability and robuster, no rust and fade, excellent heat resistance and scratch resistance..
★EASY INSTALLATION - No need drilling, just remove the original hooded catches and replace our hood catches according to the instruction. Please refer to the instructions for specific installation steps..
★PACKAGE INCLUDES - 2pcs hood latches + 2 PCS keys + screws + instruction. All our products both have 30 days money back and 24 months warranty..

Check Stock

Buyers Products 8895250 Drill-Free Light Bar Cab Mount Compatible with Ford F-250-550 (2006-2016)

Drill Free Light Bar: Ideal for mounting accessories like a mini light bar or beacon, this light bar makes it easy to mount additional strobe and work lights on your vehicle.
No Drilling Required: With a large 22 inch by 10 inch platform, it can accommodate a wide range of light bars, beacons, work lights, strobe lights, antennas, and more, up to 30 pounds.
Installs in third brake light OEM location.
More Than Just Parts: From snow and ice equipment to toolboxes, hydraulics, towing, truck and trailer hardware to our innovative lighting products, it’s amazing what Buyers Products can do for your truck.
We Do Things The Right Way: We design products like we we’re building them for ourselves, because we are.
Our teams are staffed with engineers and experts who know how to make a product exceptional.
Durable and Dependable: Founded in 1946, Buyers Products has become a leader in the truck equipment industry though our commitment to customer care, innovation, and value across our range of products.

Check Stock

VIGRUE 450Pcs Stainless Steel Wood Screws Set #4#6#8#10#12 Phillips Flat Head Sheet Metal Screw Self Tapping Screws Assortment Kit Length 1/4 to 2

✔Include #4x1/4",#4x1/2",#4x1",#6x1/2",#6x3/4",#6x1",#8x1/2",#8x3/4",#8x1",#8x1-1/4",#8x1-1/2",#10x3/4",#10x1",#10x1-1/2",#12x1",#12x2" stainless steel wood screws..
✔Made from solid 304 stainless steel, makes these flat head wood screws dependable, can effectively prevent corrosion and avoid break off..
✔Deep cut Phillips drive ensures the bit fits deep and snug in the head to help reduce stripping. These sheet metal screws are used for a variety of woodworking projects.(When using on hardwood, pre-drilling recommended).
✔Customer Support- Any issue of this self tapping screws kit, please contact by email or Q&A to get problem settled. 90 days money back warranty, 24 Hours online service..

Check Stock

Yougfin Step Drill Bits with Automotive Center Punch,Unibit Titanium Coated High Speed Steel Step Bit Set for Hole Drilling,50 Sizes with Aluminum Case for DIY Lovers,5+1pcs

...in the material. The point starts drilling at contact, reducing friction, pressure, and heat. The larger the point angle, the higher the contact pressure and the centering in the material requires more pressure.
【Double Flutes & Tri-Flatted】：These drill bits feature a special dual flute straight design for dependable performance and durability. And the shanks on these step drill bits have three flats that help prevent the bits from slipping in the drill chuck during drilling.
【Product Feature】: Step drills are indicated in sizes. These sizes determine the diameters and the number of steps. Assortment comes with 5 drill bits of a combined 50-step sizes added：6-step drill（3/16" to 1/2"），9-step drill（1/4" to 3/4"），10-step drill（1/4" to 1-3/8"），12-step drill（3/16" to 7/8"），13-step drill（1/8" to 1/2"）.

Check Stock