ReviewsDesk Boom Arm

Boom Arm Mic Stand for HyperX QuadCast,Adjustable Suspension Microphone Stand for QuadCast, QuadCast S – Upgrade C Clamp, 2 Cable Ties, Pop Filter Cover Compatible with HyperX QuadCast S by SUNMON

  • 【Hyperx quadcast boom arm】- Suspension boom arm stand fit your HyperX QuadCast suitable, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
  • 【Stability】- Mic boom arm is dual suspension springs on each boom arm, protects the HyperX QuadCast S microphone from shaking, sinking and making noise..
  • 【Upgraded Desk Clamp】-The microphone clamp has double larger contact area. Easily clip to any desk up to 2.36''/60mm thick. Soft silicone padding protects your desktop surface from any scratches..
  • 【Cable Sleeve】-Organize your QuadCast microphone connection cables to give you a tidier environment to use..
  • 【Package】- Included: 1x HyperX QuadCast Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Mic Windscreen,2x Cable Ties. Note: NOT INCLUDED HyperX QuadCast MICROPHONE..
Check Stock

Microphone Wall Mount Boom Arm - Microphone Wall Mount for Mic holder,Horizontal Mounting Wall,Space Saving Desktop Metal Mic Stand Clamp by SUNMON

  • Microphone Wall Mount Boom Arm - Mounts on the wall, eliminating the need to find a spot on your desk and freeing up your desk space..
  • Metal material - strong metal, large force area, stable bracket will not shake..
  • Different from the usual mic desk clamp - compared to other boom arm clamps, it avoids displacement and is less likely to break..
  • Metal Wall Anchors - Stronger than normal plastic wall anchors, prevents the product from falling off the wall during use and protects your Microphone and Mic Boom Arm..
  • Easy to install - comes with installation instructions, no screwdriver needed to lock mic stand, just twist. (Drilling diameter: 6mm).
Check Stock

SUNMON Boom Arm for HyperX QuadCast with Pop Filter - Wall Mount Boom Arm and C Desk Clamp, Scissor Mic Stand Compatible with HyperX QuadCast S, Microphone Brazo with Foam Windscreen Cover

  • ...nt Holder for Boom Arm - Aluminum alloy material, strong and durable. Installed on the wall, it not only solves the trouble of easy displacement of the table clip, but also saves space. Built-in plastic pads keep the screws out of direct contact with the mic stand, protecting it from wear and deformation..
  • Upgradedt Desk Clamp - The structure of the pyramid makes the stress act on the table instead of the edge, which can avoid slipping or breaking, the gasket in contact with the table is made of high-quality rubber, and the texture of the surface enhances its friction, making it stronger Excellent grip, thickened metal makes the base stronger, non-slip and anti-break. (Clip up to 6cm / 2.36" table height.).
  • Perfect Boom Arm - Suspension boom arm stand fit your HyperX SoloCast Microphone, you can easily adjust the mic to the suitable angle or height to show your perfect voice. Mic boom arm is dual suspension springs on each boom arm, protects the microphone from shaking, sinking and making noise..
  • Professional Pop Filter - Foam Cover improve audio quality and eliminate background noise. Blocks out plosives, pop, breath and wind noise without noticeable distortion or muffling of the voice. Fits like a glove and protects mic from flying spittle. Protect yo....
Check Stock

Luling Arts Microphone Arm, Upgraded Mic Arm Micropone Stand with Pop Filter Boom Suspension Stand for HyperX QuadCast, Blue Yeti, Snowball, Yeti x ,Gaming , Podcasts

  • 【Upgraded Mic Arm Leg】The microphone arm Improved from hollow to solid leg,no longer break or shake. more stable and stronger.Will not break the legs, the market will break the legs after 6 months of use..
  • 【Mic Stand with Pop Filter】Adjustable microphone stand with U-shaped three layer pop filter, reduce the plosive, wind interference,Compatible for HyperX Quadcast,RODE NT1,AT202 USB+ and more diameter of 46mm-53mm microphones..
  • 【Stability Range of Motion】The boom arm with Super-strong spring, compact boom mic arm stand designed for heavy duty carry. Max load: Approx.53oz/1.5kg. Easily Rotating or height Movement to show your perfect voice..
  • 【Upgraded Desk Mount Base】:The Suspension mic boom arm Designed for heavy duty carry and compared with old versions,all zinc alloy construction desk mount is built with anti-scratch pad and wider mouth up to 2" to fit most desktop..
  • 【Complete Microphone Stand bundle 】The boom mic stand bundle comes a 3/8” to 5/8” screw adapter,a microphone arm stand, a table clamp, a mic pop filter, a manual,5pcs cable ties ..
Check Stock

Large Desk Clamp Mount Replacement for Microphone Suspension Boom Scissor Arm, Table C Clip for Desktop Overhead Camera Tripod Mic Stand Lamp Base, Fits Up to 2.36 inch 6cm Thickness

  • [ 2 in 1 Versatile ] This table mounting clamp has 2 tube hole, it makes both vertical and horizontal use for the boom arm, mount your arm stand to table, bed post, sideboard, headboard.
  • [ Bigger Clamp Design ] This big c clip can mount to up to 2.36 inch/ 6cm thickness tabletop, meet your more application.
  • [ Durable Metal Built] This boom arm base is made of hight quality metal which is durable and sturdy, heavy duty mount for camera arm.
  • [ Wide Compatibility ] The both tube insert hole diameter is 0.47inch/1.2cm, it is compatible with most microphone arm like Blue Yeti mic boom arm, hyperx quadcast boom arm, rode psa1 boom arm, overhead camera arm, overhead phone arm, overhead tablet arm, overhead light arm stand, desk lamp.
  • [ Soft Foam ] The soft rubber padding can protect contact point from any scratches..
Check Stock

Razer Seiren X Mic Boom Arm with Foam Windscreen Suspension Boom Scissor Arm Stand with Pop Filter Cover for Razer Seiren X USB Streaming Microphone by SUNMON

  • Perfect Boom Arm: Suspension boom arm stand fit your Razer Seiren X Microphone, you can easily adjust the mic to the suitable angle or height to show....
  • Super Windscreen: Foam pop filter designed for Razer Seiren X USB Microphone with high quality acoustic foam material, filter the unwanted background....
  • Stability: Mic boom arm is dual suspension springs on each boom arm, protects the microphone from shaking, sinking and making noise..
  • Mic stand: Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.8"/4.6cm thick. The stand arm can be extended up to....
  • Package included: 1x Windscreen only for Razer Seiren X Microphone, 1x Mic Scissor Arm Stand, 1x Screw adapter (3/8" to 5/8" Match most microphones....
Check Stock

InnoGear Microphone Arm Stand, Heavy Duty Mic Arm Microphone Stand Suspension Scissor Boom Stands with Mic Clip and Cable Ties for Blue Yeti Snowball Hyper X QuadCast SoloCast Fifine Gaming(Medium)

  • Space-saving: Unlike traditional mic stands, InnoGear mic suspension boom arm is foldable, which helps free up desk space. You can easily clip and unclip the boom arm from your desk. The desk clamp can clip to any desk up to 2 inches thick..
  • Upgraded Length & Freely Position: This boom arm has a MAX reach of 28 inches horizontally and 27 inches vertically for your convenience. It allows you to freely position microphones within adjustable range and will not bounce up..
  • Sturdy Material & Improved Load-bearing: It is made of sturdy steel, the thickness of its arm tube is improved from 0.39 inches to 0.53 inches, it can bear MAX weight of 3.5lbs..
  • University Compatibility: 5/8" connector is compatible with many microphones like Blue Yeti, Blue Snowball, AT2020, AT2020USB+, AT2035, ATR2500-USB, ATR2100-USB, etc..
  • Premium Appearance: The built-in spring balance system looks more upscale and professional than other arms, which springs are exposed to the outside..
Check Stock

Audio Technica AT2035 Microphone with Knox Gear Pop Filter, Boom Arm and XLR Cable Bundle (4 Items)

  • [Strong Compatibility] :For at2020 and At2035 mic boom arm adapter wide compatibility 3/8'' to 5/8'' Screw adapter are line with industry standards.This stand not only compatible with at2020 and At2035 mic, but also suitable for mount most standard-sized microphones..
  • [Easy to use]:This at2020 and At2035 mic Microphone boom arm is simple to set up and demount, you can easily move and carry the microphone stand.Compatible with at2020 and At2035 mic,Suitable for voice-over, Video recording, broadcasting, TV stations for you additional convenience..
  • [Heavy Duty Steel Structure]: Super-strong spring with extra positioning screw, compact microphone arm stand designed for at2020 and At2035 Microphone carry,sturdy enough to keep mic well placed. Max load: Approx.2pound/1kg..
  • [Rugged desk mount]: In comparison to the old versions, this at2020 and At2035 zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2 inch/5cm to fit most desktop to fix the base..
  • [Various accessories]: The set not includes at2020 and At2035 Microphone.The set includes 1 x at2020 mic boom arm, 1 x Desk clamp, 1 x 3/8" to 5/8"Adapter, 3 x Cable tie..
Check Stock

K670 USB Mic Boom Arm with Foam Windscreen, Suspension Boom Scissor Arm Stand with Pop Filter Cover Compatible with Fifine K670 K658 Microphone by SUNMON

  • Perfect Boom Arm: Suspension boom arm stand compatible with your Fifine K670 K658 mic, you can easily adjust the mic to the suitable angle or height to show your perfect voice.
  • Super Windscreen: Foam pop filter designed compatible with Fifine K670 USB mic with high quality acoustic foam material, filter the unwanted background noise to improve your sound quality..
  • Stability: Fifine K670 boom arm is dual suspension springs on each boom arm, protects the microphone from shaking, sinking and making noise..
  • Mic stand: Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.8"/4.6cm thick. The stand arm can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
  • Package included: 1x Windscreen compatible with Fifine K670 mic, 1x Mic Scissor Arm Stand, 1x Screw adapter (3/8" to 5/8" Match most microphones and shock mount)..
Check Stock

K669B Mic Boom Arm with Foam Windscreen, Suspension Boom Scissor Arm Stand with Pop Filter Cover Compatible with Fifine K669B Microphone by SUNMON

  • Perfect Boom Arm: Suspension boom arm stand compatible with your Fifine K669B mic, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
  • Super Windscreen: Foam pop filter designed compatible with Fifine K669B mic with high quality acoustic foam material, filter the unwanted background noise to improve your sound quality..
  • Stability: Fifine K669b boom arm is dual suspension springs on each boom arm, protects the microphone from shaking, sinking and making noise..
  • Mic stand: Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.8"/4.6cm thick. The stand arm can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
  • Package included: 1x Windscreen compatible with Fifine K669B mic, 1x Mic Scissor Arm Stand, 1x Screw adapter (3/8" to 5/8" Match most microphones and shock mount)..
Check Stock

Rockville iSTAND 85 Dual Desktop Boom Arm + Gooseneck Mic/iPhone/iPad Stand

  • ...ne/tablet holder that attaches to either the gooseneck or the boom arm. Mic clip that attaches to either the gooseneck or the boom arm. 5/8” to ¼” webcam adapter that attaches to either the gooseneck or the boom arm. 3/8” to 5/8” mic adapter for use with any mic clip or shock mount.
  • Rockville iSTAND 85 Dual Desktop Boom Arm + Gooseneck Mic/iPhone/iPad Stand. Combo stand with boom arm and gooseneck so you can use multiple devices at the same time. You can use any 2 attachments at the same time (mic clip, tablet/phone holder, web cam adapter). Heavy duty steel weighted base . Boom arm has 2 arms that both can bend allowing for the ultimate adjustment flexibility..
  • Boom arm is 12.6” + 11”. 11.8” Gooseneck is Stiff and Sturdy Yet Bendable in Any Direction For Extreme Stability and Durability . Gooseneck is detachable. Professional Stand is Perfect for Studio, Podcasting, and Many Other Applications . All black design! Even the gooseneck is black. This looks great in a kitchen or on your computer desk. For Condenser Mics – This is Compatible With Any Shock Mount (Rockville Rockshock is Recommended). 5/8” Threading Fits Any Standard Condencer Mic.
  • Features of the tablet/phone holder: (2) 360 degree rotating swivel ball joints with tightenin....
Check Stock