ReviewsDesoldering Braid

CCOZN Solder Wicks, 3 Pack No-Clean Solder Braided Wicks Desoldering Wicks For Solder Removal Tool, 0.12/0.1/0.08 Inch Width 1.5 Meter Length

  • ☃[Package Include] You will get 3 packs No-Clean Solder Braided Wicks.
  • ☃[Appropriate Size] Package includes 1 pack 2.5mm x 1.5m / 0.1inch x 5 ft solder wick, 1 pack 2.0mm x 1.5m /0.08inch x 5ft solder wick, 1 pack 2.0mm x 1.5m /0.08inch x 5ft solder wick..
  • ☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder..
  • ☃[Solder Braided Wicks]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
  • ☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering..
Check Stock

Yoodelife Desoldering Wick, solder braid with 2.5mm Width, 1.5m Length and Solder Sucker Desoldering Vacuum Pump Solder Removal Tool Blue, Set of 2

  • High quality desoldering braid with unique no clean flux and gemetrically- precise weave.
  • Pure oxygen free copper wire with 0.1"W x 5'L, weight 0.4oz.
  • Excellent thermal transfer for faster, safer desoldering using lower temperature irons.
  • High Quality Solder Sucker & Light Material: Super high pressure vacuum with aluminum body frame with right size: 7-1/2" length x 3/4" diameter.
  • Special Design: Right or Left handed design allows easy one-handed use.
Check Stock

Lesnow solder wick Braid With Flux 3mm/0.12" Width 10' Length, No-Clean Desoldering Wick Braid Remover tool, Soldering Wick Disassemble Electrical Components,copper desolder wick Braid

  • The braided solder wicks are suitable for labs, home and industry welding work,can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • This desoldering wick has geometrically-precise weave with copper wires with nice quality and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.12 inch in width, enough quantity and length for your daily needs.
  • If you are using the solder wick for the first time, it is recommended to use a multi-point flux to assist in cleaning,At the same time, in order to prevent burns, do not directly touch the solder core at close range during use..
  • If for any reason you are not 100% satisfied with lesnow solder cores, we sup....
Check Stock

MIKIMIQI Solder Wicks, No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool, 0.1 Inch Width 3 Meter Length

  • ❤ Package Include - You will get 1 pack No-Clean Solder Braided Wicks.The color of the label is random..
  • ❤ Appropriate Size - The size of the solder wick is 2.5mm x 3m / 0.1inch x 10 ft..
  • ❤ Premium Material - The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, strong capillary action to pull in excess solder..
  • ❤ Solder Braided Wicks - The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
  • ❤ Applicable Occasions - The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board..
Check Stock

Desoldering Braid

Check Stock

Vastar Solder Wick, 3 Packs Desoldering Wick, Solder Braid 2.5mm Width, 1.5m (5ft) Length

  • Size of the solder wick: Width 2.5mm, Length 1.5m, Weight 0.4oz.
Check Stock

KOTTO Solder Sucker No Clog Aluminum Desoldering Pump Soldering Tools with Powerful Vacuum Suction for Removal & Repair Heat Resistant Silicone Suction Nozzle Replacement Silicone Tube included

  • [STURDY] Made of high quality 6061 aircraft grade aluminum, and precision CNC machined. This high-efficiency solder sucker can remove solder from circuit boards simply by cocking it, and pressing the trigger button with one hand..
  • [CONVENIENT] The solder braid quickly absorbs molten solder and leaves a clean working area. Wide applications on digital product repair, circuits repair, precision gadget repair, home appliances repair, and other project scenarios..
  • [DURABLE] Quick and easy for solder residue clearance. Withstands direct contact with a soldering iron. Heat Resistant silicone suction nozzle suitable for most surfaces including uneven ones..
  • [EFFECTIVE] Compact and lightweight desoldering tool with powerful suction for solder removal. Internal spring produces ultra-powerful suction. Perfect desoldering gun tool for DIYers and hobbyists..
  • [AFTER SERVICE WARRANTY] Our US based customer service means that you can trust that if you’re not satisfied for any reason, you can get a hassle-free refund or replacement..
Check Stock

YIHUA 948-II Professional Soldering Desoldering & Rework Station bundle with the #948N Desoldering Nozzles with Iron Holder Soldering Iron and Accessories 40 Items

  • The bundle includes: 948-II Professional Soldering, Desoldering & Rework Station (Essential accessories included) with the #948N Desoldering Nozzles.
  • The 948-II station essential accessories include: 1 x holder, 2 x filter spring, 4 x desoldering nozzle, 6 x suction pen nozzles, 2 x retainer, 1 x....
  • The 948-II professional soldering, desoldering & rework station: Soldering/Desoldering temperature from 662~896℉, hot air temperature from....
  • #948N Desoldering Nozzles: The genuine desoldering nozzle for the 948 desoldering gun. The nozzles are consumable parts for the desoldering procedure,....
  • Quality Assurance: Because you buy directly from the manufacturer, you can enjoy 1-year quality assurance on all our soldering iron/station & rework....
Check Stock

YIHUA 929D-V Electric Desoldering Iron Solder Sucker Desoldering Pump with Shorter Charging Handle and Desoldering Nozzles 1.0mm 1.2mm for Through-Hole Desoldering

  • This 929D-V desoldering iron integrates soldering iron and desoldering pump, you can enjoy the single-handed and continuous desoldering with its short charging handle to rid the hassle of changing grip positions. If you are looking to purchase a desoldering tool that can handle the desoldering jobs of through-hole components and removing excess solder (solder bridges) without jamming up, this is a great choice..
  • This is a plug-n-play desoldering iron. Plug in the power plug, allow the desoldering iron to preheat for approximately 3 minutes, and you are ready to go. YIHUA exclusive heating system combined with a strong desoldering pump ensures you experience uninterrupted desoldering..
  • Different from the traditional use-and-throw desoldering irons, the 929D-V can be used, easily cleaned, and reused. You can lift and pull out the scrap solder storage tube and clean the solder out like a breeze. Meanwhile, we also included 2 different and interchangeable diameters (φ1.0mm & φ1.2mm) desoldering nozzles for different sizes of through-hole components. NOTE: change the nozzle after the desoldering iron has cooled completely..
  • This desoldering iron comes with a heat deflector at the end of the heating element, and this prevents the excess heat from transferri....
Check Stock

YIHUA 948 Professional Desoldering Station bundle with the #948N Desoldering Nozzles with Iron Holder, Soldering Iron, and Accessories (31 Items)

  • The bundle includes: 948 Professional Desoldering Station (Essential accessories included) with the #948N Desoldering Nozzles.
  • The 948 station essential accessories include: 10 x carbon filter, 4 x desoldering nozzle, 1 x silicone pad, 2 x filter spring, 2 x ceramic filter, 2 x rubber retainers, 1 x holder, 1 x cleaning sponge, 1 x cleaning pin set, 1 x cleaning pin.
  • The 948 professional desoldering station: Temperature range from 662~896°F. The station has temperature stabilization function to keep the desoldering gun at the set temperature steadily for your work.
  • #948N Desoldering Nozzles: The genuine desoldering nozzle for the 948 desoldering gun. The nozzles are consumable parts for the desoldering procedure, we're packing 4 additional nozzles in the package to ensure you're stocked up for future work loads..
  • Quality Assurance: Because you buy directly from the manufacturer, you can enjoy 1-year quality assurance on all our soldering iron/station & rework stations/portable hot air guns. (*consumable product such as soldering iron tips are not covered by the warranty) On top of that, you'll also gain access to our on-demand after sales support on amazon for any troubleshooting/general queries..
Check Stock

Desoldering Gun, Solder Sucker Desoldering Iron Electric Desoldering Tool with Desoldering Nozzles, Solder Wick, Soldering Tip and Cleaning Pin (Blue)

  • 【Desoldering Gun】No need to operate the soldering iron with one hand and the solder sucker pump with the other any more, our electric desoldering gun combines heating and desoldering functions that ensure you an easy and comfortable way to one-hand operation, and the deflector can reduce the heat from transferring to your hand when using the solder suck. This solder sucker kit will give you a smooth working experience in a time-consuming desoldering project..
  • 【No Jam&Easy to Clean】Compact and lightweight to carry everywhere, non-slip grip to meet a perfect touch, plug and play and no need a soldering station, let this full upgraded desolder kit be your best helper for desoldering work. The powerful heating system and solder extraction design of the desolder gun ensure you desoldering without jam. Cleaning is also quick and easy, just lift and pull out the scrap solder storage tube and clean the solder out completely without mess..
  • 【Perfect Desoldering Tool】 You will get a eletric vacuum desoldering iron, a solder wick, a cleaning sponge, a cleaning Pin, 2 interchangeable diameters (φ1.0mm & φ1.2mm) desoldering nozzles for different sizes of through-hole components, and a solder tip for transforming this electric solder sucker into a ....
Check Stock