ReviewsDesoldering Braid With Flux

Soldering Iron Auxiliary Kit, Desoldering Pump, No-Clean Soldering Core (Width2.5mm / 0.1\

The main body of the desoldering pump is made of high-quality ABS material, with a non-slip sponge. The nylon nozzle can withstand high temperature, anti-static, heat-resistant, durable, special design, convenient for one-handed use..
High-quality desoldering braided tape is woven with fine copper wire, unique no-clean flux, easy to use, pure oxygen-free copper wire, 2.5mm / 0.1 inch width and 1.5m / 59 inch length, can help remove excess Avoid solder,Avoid short circuit， especially in hard-to-reach small areas..
Micro Shear Wire Cutter Pliers are made of high quality steel, with strong cutting ability, For cutting flexible cords up to 1 mm, non-slip handles, return springs, small volume。.
Solder wire diameter: 0.8mm, weight: about 0.35 ounces / 10 grams. Easy to carry and store, suitable for various soldering irons..
Suitable for correcting errors on PCB boards, cleaning small components, resoldering and desoldering circuit boards, Appliance Repair, Family DIY lovers, welding, etc..

Check Stock

GOOT Solder Wicks Made In Japan No-Clean Solder Braided Wicks Desoldering Wicks With RMA Flux,59'Length x 0.12\Width

Brand History -- Founding in 1965, GOOT had captured a 60 per cent share of Japan’s domestic market for soldering products and for almost 50 years has been providing customers with a wide range of high quality and easy-to-use soldering products..
High Efficiency -- High performance solder absorbing wire precision preparation with copper wire and special chemical formula, suitable for precision instruments (RMA corresponds to the use of standard flux). Our thin and soft desoldering wire’s flat braid has efficient thermal transmission. Removes solder faster with better heat response than previous wicks. Recommended for lead-free solder with high heating load..
Good Quality -- Solder wire with flat needle type preparation, soft design, fast heat transfer, suitable for fast absorption. It not only help you improve efficiency and quality, also more environmentally friendly..
Safety and Variety -- Use at ease. No fluorine, low residue, suitable for a variety of PCB circuit boards. Size - W 0.12" L 59".
100% Satisfaction Guarantee -- You can return the undamaged product and packaging without any reason within 30 days. Any problems can be contacted by email..

Check Stock

TOWOT Solder Wick & Desoldering Pump, 6 PCS Different Desoldering Wick & Solder Sucker-Desoldering Vacuum Pump Solder Remover

Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand..
7-in-1 Solder Set: 6 pcs different copper solder braid is made of copper and rosin geometrically accurate braiding when it is heated, it can quickly absorb and melt to remove excess solder, avoiding short circuits, size (2.0mm,1.5m.
3.0mm,1.5m), Suction Pump Size (length: 21cm)..
High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable..
Widely Used: Desoldering wicks and desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
Value Package: 7-in-1 soldering package, commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!.

Check Stock

Chemtronics Desoldering Braid, Chem-Wik, Rosin, 10-50L 0.10\

Responds as much as 50% faster than conventional desoldering braids.
Lighter mass and pure copper braid construction.
Better thermal conductivity, even at low temperatures.
Overheating minimized by requiring less heat for shorter time.

Check Stock

Pro-Line Helping Hands Soldering Station with Illuminated Magnifier & 15 Watt Soldering Iron 15W by RadioShack

20W miniature soldering iron with ergonomic cool-comfort grip with stand and cleaner..
2.5mm desoldering braid & cleaning sponges..

Check Stock

TOWOT Desolding Pump & 2PCS Desoldering Wick (Length: 1.5m; Width: 2.5mm) Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid

Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand..
3-in-1 Solder Set: 2 PCS copper solder braid is made of copper and rosin geometrically accurate braiding, when it is heated, it can quickly absorb and melt to remove excess solder, avoiding short circuits, size (length: 1.5m.
width: 2.5mm), Suction Pump Size (length: 21cm)..
High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable..
Widely Used: Desoldering wicks and desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
Value Package: 3-in-1 soldering package, commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!.

Check Stock

TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering

【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively..
【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas..
【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time..
【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards..

Check Stock

CCOZN Solder Wicks, 2 Pack No-Clean Solder Braided Wicks Desoldering Wicks For Solder Removal Tool, 0.1 Inch Width 1.5 Meter Length

☃[Package Include] You will get 2 packs No-Clean Solder Braided Wicks.
☃[Appropriate Size] Package includes 2 pack 2.5mm x 1.5m / 0.1inch x 5 ft solder wick.
☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder..
☃[Solder Braided Wicks]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering..

Check Stock

CCOZN 2 Pack 19.6Ft Solder Wick, No-Clean Solder Braided Wick Desoldering Wick For Solder Removal Tool, 0.1 Inch Width 3m Length for Each

☃[Package Include] You will get 2 pack No-Clean solder braided wicks.
☃[Appropriate Size] Package includes 2 pack 2.5mm x 3.0 m / 0.1 inch x 9.8 ft solder wicks.
☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder..
☃[Solder Braided Wick]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering..

Check Stock

Soldering Iron Kit Electronics 21-in-1 60W Adjustable Temperature Soldering Iron 5pcs Soldering Iron Tips Soldering Iron Stand Desoldering Pump Magnifier Solder Wire Tweezer PU Carry Bag

【21-in-1 Soldering Iron KIT】Soldering iron kit comes with soldering iron, solder wire, desoldering pump, solder wick, stand with cleaning sponge,....
【HEAT UP QUICKLY and HEAT DISSPATION EFFICIENCY】60 watts, heat up quickly(2 minutes or so). Adjustable temperature with thermostat range....
【DURABLE SOLDER WICK& DESOLDERING PUMP】The solder wick is 2.0mm wide, 1.5m in length, 0.4oz in weight and is easy to clean residue flux,....
【PORTABLE STORAGE PU CARRY BAG】The multifunctional tool PU carry bag is rather convenient to store small tools. Which can avoid losing the....
【RANGE of APPLICATION】The soldering iron sets are the best gift idea for DIY, various repaired usage of electronics and chipboards, welding,....

Check Stock

CCOZN Solder Wicks, 3 Pack No-Clean Solder Braided Wicks Desoldering Wicks For Solder Removal Tool, 0.12/0.1/0.08 Inch Width 1.5 Meter Length

☃[Package Include] You will get 3 packs No-Clean Solder Braided Wicks.
☃[Appropriate Size] Package includes 1 pack 2.5mm x 1.5m / 0.1inch x 5 ft solder wick, 1 pack 2.0mm x 1.5m /0.08inch x 5ft solder wick, 1 pack 2.0mm x 1.5m /0.08inch x 5ft solder wick..
☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder..
☃[Solder Braided Wicks]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering..

Check Stock