ReviewsDesoldering Station

Desoldering Gun, Solder Sucker Desoldering Iron Electric Desoldering Tool with Desoldering Nozzles, Solder Wick, Soldering Tip and Cleaning Pin (Blue)

  • 【Desoldering Gun】No need to operate the soldering iron with one hand and the solder sucker pump with the other any more, our electric desoldering gun combines heating and desoldering functions that ensure you an easy and comfortable way to one-hand operation, and the deflector can reduce the heat from transferring to your hand when using the solder suck. This solder sucker kit will give you a smooth working experience in a time-consuming desoldering project..
  • 【No Jam&Easy to Clean】Compact and lightweight to carry everywhere, non-slip grip to meet a perfect touch, plug and play and no need a soldering station, let this full upgraded desolder kit be your best helper for desoldering work. The powerful heating system and solder extraction design of the desolder gun ensure you desoldering without jam. Cleaning is also quick and easy, just lift and pull out the scrap solder storage tube and clean the solder out completely without mess..
  • 【Perfect Desoldering Tool】 You will get a eletric vacuum desoldering iron, a solder wick, a cleaning sponge, a cleaning Pin, 2 interchangeable diameters (φ1.0mm & φ1.2mm) desoldering nozzles for different sizes of through-hole components, and a solder tip for transforming this electric solder sucker into a ....
Check Stock

CALIDAKA LED Lamp Bead Desoldering Station,550W PTC Heating-Soldering Plate,Hot Plate LED Remover Chip Welding Station,LED Lamp Station Fever Plate Chip for LED Repair DIY Laboratory

  • LED Lamp Bead Desoldering Station is composed of high-performance high-power PTC heating plate and aluminum heat sink..
  • LED Repair Hot Plate rapid surface temperature rises by 250 plus or minus (10 degrees), and the predetermined temperature can be reached in 30 seconds, without the need for a thermostat..
  • LED Remover Chip Welding Station can be used to desolder LED lamp beads and FPC sockets, and can also be used to plant tin balls for B G A..
  • Plug and play, fast desoldering, no damage to the lamp beads..
  • Multifunctional LED lamp beads/chip/B G A desoldering tool..
Check Stock

YIHUA #948P Stainless Cleaning Pin Set for Desoldering Gun For Yihua 948/Yihua 948-II Desoldering Station ONLY

  • YIHUA #948P Stainless Cleaning Pin Set for Desoldering Gun (For Yihua 948/Yihua 948-II Desoldering Station ONLY).
Check Stock

Solder Sucker Desoldering Pump Automatic Electric Desoldering Gun Station Sucking Vacuum Pump AC110V 30W Iron Tin Solder Removal Repair Tool with 3pc Soldering Suction Tips

  • 【Strong Suction Power】: This electric desoldering pump provides a strong suction, can be applied on thick film integrated circuits and large components with big welding joints. Automatic soldering, perfect for tin removing, largely improving the working efficiency..
  • 【3Pcs Soldering Nozzles】: The 30W AC110 solder sucker is equipped with three different nozzles: 1.0mm, 1.5mm, 2.5mm, convenient for you to replace, satisfied most of your needs..
  • 【Heat up Quickly & Durable】: After charging for about 5 minutes, the desoldering gun can be removed and support a long time using. The solder vacuum pump is made of premium metal alloy, can prevent oxidation. Stainless steel cover, built-in fine durability heating element, useful and practical..
  • 【Widely Application】: The tin solder removal tool with 3pcs tips is widely used in correcting mistakes on PCB boards, welding circuit boards, jewelry welding, cleaning small components, re-soldering and desoldering..
  • 【One Hand Operation】: The portable desoldering station enables simple one hand operation. Light in weight and compact in size, adding more convenience to your daily repairing..
Check Stock

TOAUTO 959D Hot Air Rework Station-SMD Hot Air Gun, Digital Heat Gun Soldering Station, Heat Gun 480 °C, Large Screen LED °F /°C Display, with 3 Air Nozzles Tweezers IC Extractor for Desoldering Tool

  • ...°C Conversion 】Come with a large LED screen display function, making mode selection more intuitive. °F /°C function easily changes the LED digital reading of the heat gun temperature from "Celsius to Fahrenheit". Real-time display of hot air rework station working status allows you to focus on interesting desoldering work..
  • 【Quick Heating & Auto Cooling Down】Hot air rework station upgraded heating elements and PID rapid heating system, it can quickly rise to the set temperature within 3-5 seconds. It also has a memory temperature function when the heat gun is lifted from the bracket or placed on the bracket, it can be quickly heated up the temperature or closed..
  • 【Upgrade Advanced Technology】TOAUTO hot air rework station uses a unique long steel tube nozzle that can be adapted to various types of nozzles, so you don’t have to worry about finding a suitable nozzle. Using brushless fan & high-temperature resistant silicone handle cable, working noise is lower than 45 decibels, supporting long time work..
  • 【Precise Temperature Control】TOAUTO hot air station adopts high-precision temperature control technology, the temperature adjustment range is from 100°C to 480°C (212°F-896°F).
  • 8 levels of adjustable airflow, you have the wind ....
Check Stock

ANBES Soldering Iron Kit Electronics, 60W Adjustable Temperature Welding Tool, 5pcs Soldering Tips, Desoldering Pump, Soldering Iron Stand, Tweezers

  • Soldering Iron Support Station: Standard dual spring soldering iron holder with sponge is a very useful tool when the soldering iron work.It has a secure base and it is more safer than any other thin soldering stand.The maximum extent to avoid the user was burned and damaged..
  • Soldering Iron Unique Features: Superior professional soldering iron has 5 multiple tips replacement, Heat and impact resistant design of screw thread so the iron head is not easy to drop.Adjustable Temperature from 200℃-450℃.Heat up fast and work great..
  • Solder Sucker Desoldering Pump: Rugged metal construction,the desoldering pump is high pressure vacuum tube with aluminum body frame, which allows easy one-handed use, best for removing solder from PCB through hole solder joints..
  • Widely Used & Carry Portable: Soldering iron tools widely used for welding circuit board, appliance repair, Home DIY hobbyists,jewelry welding.You can take it anywhere and you will be able to find the tools you need in the carry bag..
  • 14-In-1 Soldering Kit: Soldering iron kit comes with soldering iron,desoldering pump, 5 multiple soldering tips, tin wire tube, soldering iron stand, tweezers, wire stripper cutter, 2 electronic wire..
Check Stock

Herain No-Clean Solder Wick Desoldering Braided Wicks with Flux Desoldering Wicks Removal Tool Solder Sucker Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components

  • 1.High-quality materials: The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption..
  • 2.Geometric braid design: The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board..
  • 3.Widely used: No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder..
  • 4.Easy to use: Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station..
  • 5.Ingenuity quality: 1 piece of no-clean solder braided wicks (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time..
Check Stock

Helping Hands Soldering, NAKOOS Third Hand Soldering Tool PCB Holder Station with 4 Flexible Metal Arms Solder Iron Stand Heavy Duty Steel Base for Jewelry Crafts Repair Hobby

  • ... adjustment extra rubber cover for PCB. Locks in place with knurled thumb nuts..
  • 【Detachable Soldering Iron Stand】There is an additional metal soldering iron stand contained in the pack, solving the issue where to place the soldering pen after using. The stand is detachable and easy to install. Suitable for desoldering work..
  • 【Widely Use & Service】 This solder station is easy and simple to set up, could be widely used in soldering, desoldering, electronic repair, crafting, modeling. NAKOOS is strict with quality and every product is fully inspected. THREE MONTHS unconditional exchange and return policy is supported..
Check Stock

Aoyue 932 Vacuum Pickup Station

  • This is vacuum pickup station that picks up chip easily after desoldering.
  • Includes a large size 40g, medium size 18g and small size 3g suction heads..
Check Stock

NEWACALOX soldering gun with soldering iron tips set

  • Soldering Gun Kit, One hands Holding Solder Desoldering Guns Set for Circuit Board Repair DIY 50W 110V.
  • 16pcs Lead-free Soldering Iron Tips Welding Tips for HAKKO 936,937,907 Atten, Quick, Aoyue, Yihua,Vastar,Sywon,Tabiger,SOAIY and X-Tronic solder iron/Soldering Station.
Check Stock

MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool

  • ( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat....
Check Stock