ReviewsDewalt Dw71mitre Saw

GreatNeck BSB14 12 Inch Mitre Box with 14 Inch Back Saw Reinforced Steel Back Saw for Accurate Cutting Preset 45 Degree and 90 Degree Cuts Saw with Box

  • MITRE BOX AND SAW: These mitre boxes with hand saws are designed to cut soft and hard woods commonly used in molding and trimming applications.
  • REINFORCED BACK SAW: This mitre box saw set includes a reinforced steel back saw for wood for accurate cutting.
  • PRESET CUTTING BOX: Our mitre saw box has convenient preset cuts for 45 degree and 90 degree angles, allowing for precisely beveled corner cuts.
  • RULER EDGE INCLUDED: The mitre box in this precision saw set includes a built-in 8-1/2 inch ruler edge for quick measurements and precise cuts.
  • DURABLE ANGLE BOX: This compact mitre saw set comes with a high-impact polystyrene mitre box and a steel back saw with a high-impact plastic saw....
Check Stock

MUK LUKS womens Pull on Slipper Dark Sapphire X-Large US

  • Stainless-steel miter detent plate of the 10-inch miter saw blade comes with 14 positive stops.
  • The mitre saw has a precise miter system and machined base fence support.
  • Tall sliding fence of DEWALT miter saw supports 4-1/4-inch base vertically.
  • Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right.
  • 2-inch x 6-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 4-inch dimensional lumber at 45 degree.
Check Stock

Velodi 2 PCS 6302-2RS Replacement Ball Bearing for DeWalt DW708 DW716 DW717 DW718 DWS780 Miter Saw# N127530

  • Compatible with: DeWALT: DW706 Type 1 12 Dual Bevel Miter Saw, DW708 Type 1 Crosscut Miter Saw, DW708 Type 3 Crosscut Miter Saw, DW708 Type 4 Crosscut....
  • Pre-Lubricated and Stable Performance and Cost Effective, Deep Groove Ball Bearings..
  • Double Seal Effectively Saves Grease and Prevent Impurities From Entering..
Check Stock

DEWALT DW1803 Heavy Duty 7/16-Inch Shank Quick Change Mandrel (Fits Hole Saws 1-1/4-Inch - 6-Inch)

  • DW1810 offers tool-free quick-release collar to prevent hole saws from locking to the mandrel.
  • DW1803 and DW1805 offer spring-loaded collar that automatically engages drive pins to prevent hole saws from locking to the mandrel.
  • All quick change mandrels feature double set screws with a recessed combination head for quick and easy centering bit changes.
  • All quick change mandrels utillize hardened steel construction and have been tested through 15,000+ cycles to deliver jobsite durability.
  • DEWALT offers a full range of standard and quick change mandrels for versatility in a wide range of hole saw applications.
  • DEWALT offers a full range of standard and quick change mandrels for versatility in a wide range of hole saw applications..
Check Stock

DeWalt N152704 Reciprocating Saw Case (Tools not included)

  • GENUINE DeWALT HEAVY-DUTY TOOL CASE FOR CORDLESS RECIPROCATING SAWS..
  • Holds the following Cordless DeWalt Reciprocating Saws:18V (DW938 & DC385), 20V (DCS380), & 14.4V (DW937)..
  • Holds saw, 2 batteries and a charger. EMPTY CASE ONLY - NO TOOLS ARE INCLUDED..
Check Stock

DEWALT Miter Saw, 12-Inch, Double Bevel, Compound, XPS Cutline, 15-Amp (DWS716XPS)

  • Stainless-steel miter detent plate with 14 positive stops delivers repeatable accuracy and worksite durability for the 12-inch miter saw blade..
  • Tall sliding fences of the mitre saw support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against fence..
  • Double-bevel design of DEWALT miter saw allows saw to bevel 0 degree - 48 degree to the left and right with positive stops at 0 degree, 22.5 degree, 33.9 degree, and 45 degree.
  • 0 degree - 50 degree left and right miter capacity.
  • Cam lock miter handle with detent override delivers quick and accurate miter angles..
  • LED work light system provides adjustment-free cut line indication for accuracy and visibility..
Check Stock

DEWALT DW7084 Crown Stops for DW703, DW706, DW708, DW712, DW715, DW716, DW717, DW718

  • Accurately positions crown molding vertically against the saw fence.
  • includes 2 stops, one for each side of the blade.
  • Designed to work with DeWalt models DW703, DW706, DW708, DW712, DW715, DW716, DW717 and DW718.
Check Stock

2-pack 45-69-0010 Blade Pulley Tire fits Milwaukee Band Saw Deep Cut 6230 6232-6 6225

  • Saws that use 44-7/8 in. Blades.These tires are 6 inches outside diameter and 1/2 inch wide..
  • Replacement rubber tire for Milwaukee electric corded band saws NOT the battery cordless ones..
  • These tires should fit any model of Milwaukee band saw 6225, 6226, 6230, 6230N, 6232-6, 6232-6N, 6236, 6236N, 6238N, and 6238..
  • These tires will also fit DeWalt band saw model DW328, DW328K, DW 329, DW329K, and D28770 type 1.These tires will also fit Porter Cable Porta-Band saws model 725, 726, 736, 7723, 7724, and 9725. The Porter Cable part number is AO2807..
Check Stock

650721-00 Dewalt Bandsaw Tires For Dewalt Band Saw Tires DWM120 A02807 DCS374 DW328K - 2 Pack

  • 【Bandsaw Tires】Replacement DeWalt and Porter Cable bandsaw rubber tire part is 650721-00, A02807, 5140020-79, 65072100, 514002079,725 726 736 7724 9725 PC7723,DW328. band saw tire has an outer diameter 6 " and width 1/2 ".
  • 【Compatibility】Fits Band Saw Models : 3128-BDK Type 2, 3128K Type 2, 3129 Type 2, 3129K Type 2, 725 Type 1, 725 Type 2, 725 Type 3, 726 Type 1, 726 Type 2, 726 Type 3, 736 Type 1, 7724 Type 1, 7724 Type 2, 7724 Type 3, 9725 Type 1, 9725 Type 2, 9725 Type 3, D28770 Type 1, D28770K Type 1,DCS374B Type 1, DCS374P2 Type 1, DW328 Type 3, DW328 Type 4, DW328K Type 2, DW328K Type 3, DW328K Type 4, DW329 Type 2..
  • 【Dwm120 Tire】Fits Band Saw Models: 6230 (SER 678-1001) (SER 678-1105) (SER 678-26651) (SER 678-31501) (SER 678-32001) (SER 678A) (SER 678B) (SER 678C) (SER 678D) (SER 678E) (SER 678F) (SER 678G) (SER 678H) 4-3/4 Inch Deep Cut Band Saw 6230,DWM120 Type 1, DWM120 Type 2, DWM120K Type 1, DWM120K Type 2, J-724 Type 1, J-724 Type 2, J-724 Type 3, PC7723 Type 1, PC7723 Type 2, PC7723 Type 3..
  • 【Rubber Tire】Two tires are needed on the Bandsaw,If one tire is worn, it is advisable to replace both at the same time. Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You....
Check Stock

Makita XSL08Z 18V x2 LXT Lithium-Ion (36V) Brushless Cordless 12" Dual-Bevel Sliding Compound Miter Saw, AWS Capable & Laser, Tool Only

  • Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops.
  • The mitre saw features the precise miter system and machined base fence support.
  • Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically.
  • Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right. Tool height-15 inch.
  • 2-inch x 8-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 6-inch dimensional lumber at 45 degree.
Check Stock

THE SMART CUT Aluminum Table Fence 18 ft with Universal Saw Attachment Mounts & Measuring System | For Any Portable Chop or Miter Saw Stand | Compact & Lightweight | Easy Setup Jobsite Table

  • Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops.
  • The mitre saw features the precise miter system and machined base fence support.
  • Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically.
  • Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right. Tool height-15 inch.
  • 2-inch x 8-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 6-inch dimensional lumber at 45 degree.
Check Stock