ReviewsDia Nc Cutting

YDLQWCZ Combination Drill Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 Screw Tap Bit 1/4 Inch Hex Shank HSS Spiral Flute Tapping Tool Set Kit Deburr Countersink Bit

  • ...ortlessly. The 1/4" (6.35mm) hexagonal shank has a tapered end to prevent excessive knocking.The back taper exceeds the tap to prevent over-drilling and thread damage..
  • High Speed Steel 4341 Material - The surface of the titanium alloy combined drill bit is treated with titanium alloy, which effectively improves the cutting performance of the drill bit, is more wear-resistant, and prolongs the service life. Made of high-speed steel 4341, to ensure sharpness, speed, and maintain strength and efficiency..
  • Improve Efficiency - Drilling, tapping, deburring, and countersinking can complete the processing of copper, brass, aluminum, sheet metal, low carbon steel, and plastic at one time, improving work efficiency. Deepening the chip flute helps to remove the chips and debris on the tap, reducing friction and heat, so as to achieve a faster and colder drilling process..
  • Easy to Carry - This drill tap bits set is equipped with a storage box, which is convenient to carry and helps to keep the drill bit tidy..
Check Stock

Wilton Nesting Circles Cookie Cutter Set, 4-Piece

  • 4 Cookie Cutters in in various sizes give you the flexibility you need for cutting through cookie dough or fondant.
  • Before first and after each use, hand wash in warm, soapy water.
  • rinse and dry thoroughly with a soft cloth.
Check Stock

ZBAITU A40 Laser Engraver, 80W Laser Engraving Cutting Machine, 10W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • ...er has 80W machine power and 10W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU A40 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU A40 is equipped with ZBAITU C80 laser module, real 10W laser output power greatly increase engraving and cutting speed.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU A40 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, A40 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU A40 laser engraver cutter perfectly compatible with various engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10, and also support macOS system (LightBurn), ....
Check Stock

ZBAITU M37 Laser Engraver, 40W Laser Engraving Cutting Machine, 5.5W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • ...t power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU M37 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU M37 is equipped with ZBAITU C40 laser module, 5.5W laser output power can engraving and cutting fast enough.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU M37 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, M37 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU M37 laser engraver cutter perfectly compatible with various engraving software, such as LaserGRBL, LightBurn, sup....
Check Stock

scottchen PRO Mounting Mandrel 3/8" & 1/4" Arbor Hole (2pack) for Type 1 Cut-Off Wheel 1/4" Shaft for Die Grinder Rotary Tool

  • 【Function】This mounting mandrel is mainly designed for mounting 3/8” or 1/4” arbor hole and small diameter cutting wheel, the screw neck length fit 0.035" to 1/4" thick Type 1 cut-off wheels..
  • 【Multi Uses】The die grinder mandrel consist of a shank with 2pcs different types threaded head, the chuck type arbor construction also can be used for mounting any other various type wheels, such as grinding, sanding, cleaning, polishing wheels or saw blades ..
  • 【Fit for Tools】The Cut-Off Wheel mandrel with 1/4” shank, fit for most grinder, drill rotary tools which can accept 1/4” stem mandrel. Easy mount and demount. Really the perfect essential die grinder accessory..
  • 【Material】The cutting wheel mandrel is made of A3 carbon steel with black plating, which is durable, anti-rust and can last for long life..
  • 【Spec】Shank dia x L: 1/4” x 1-15/16”, #1 screw head dia x arbor dia x L: 3/4” x 3/8” x 5/8”, #2 screw head dia x arbor dia x L: 3/4” x 1/4” x 5/8”. Pack: 2 pack..
Check Stock

BNYZWOT MC-31 Surface Mount Wired NC Door Contact Sensor Alarm Magnetic Reed Switch White 10pcs

  • Hole Dia.: 5.8mm Contact Type: NC (Normally Closed) Close to the magnet conductivity.
  • Each Size(Approx): 63 x 18.6 x 13mm, 65 x 12 x 13mm(L*W*H) Material: PVC.
  • Package Content: 10pcs x Magnetic Door Switch, Some Install Parts.
Check Stock

uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 6mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 4mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell Key Lock Switch On/Off Emergency Door Release DPST for Access Control Panel Mount with 2 Keys

  • Voltage & Current : AC 250V 5A, AC 220V 5A.
  • Overall Size(Approx) : 2.2 x 4cm / 0.87" x 1.6"(Max. W * L).
  • Package Content : 1 x Keylock Switch2 x Keys.
Check Stock

RAGE Hypodermic Crossbow NC 2-Blade Hunting Arrow Broadhead (3 Pack) Exclusive Hybrid Tip, Machined Stainless Steel Ferrule, No Collar Blade Lock.035” Swept-Back Blades, Huge 2” Cut, 100 & 125 Grain

  • RELIABLE BLADE RETENTION: Hypodermic Crossbow NC utilizes cutting-edge finger-like tabs on the blades’ Slip Cam pivot point to “anchor” them in place while in the closed position, completely eliminating the need for a Shock Collar, dental band or O-ring..
  • SURPERIOR FIELD-TIP ACCURACY: Upon impact, the blades instantly deploy to a 2-inch cutting diameter, administering the gaping wounds that bowhunters have come to expect from the field-proven Rage Hypodermic series..
  • LETHAL GAPING WOUNDS: The two .035” thick razor-sharp blades deploy on impact, sliding into a swept-back blade angle while the 2” cutting diameter delivers a wide entry hole for gruesome blood trails and brief tracking jobs..
  • PINPOINT ACCURACY: The new Hypodermic Crossbow NC features the lethal Hypodermic hybrid tip with an even narrower profile and needle-like ferrule. In flight, that streamlined design makes for superior field-tip accuracy..
  • BANG FOR YOUR BUCK: Your purchase includes three 125 Grain broadheads. All Rage broadheads are made in the USA. Rage leads the evolution in Mechanical Broadheads and is known for their pinpoint accuracy, extreme penetration, and legendary wound channels..
Check Stock