ReviewsDiamond Carving Burr

Diamond Burr Set For Dremel Rotary Tool Grinding Cutting Bur Bit Stone Glass Tile Jewelry Engraving Rock Etching Masonry 1/8” Die Grinder Carving Cutter Metal Engraver Kit Notching Lapidary - 32pc Set

  • SET INCLUDES: (20) Diamond Bur Bits, (10) Diamond Cutting Wheels (With Mandrels), (2) Polishing Bits.
  • For Stone, Metal, Glass, Porcelain, Ceramic, Gemstone, Concrete, Plastic, Fiberglass, Brick, Tile.
  • For Grinding, Cutting, Carving, Engraving, Etching, Jewelry Working, Drilling, Lapidary, Masonry.
  • Burr Shapes: Round, Oval, Ball, Cone, Cylinder, Needle Point, Tree, Pointed, And Flame Shaped Burs.
  • COMPATIBLE WITH: Dremel Tool, Rotary Tools, WEN Rotary Tool, Drills, Die Grinders With 1/8" Collet.
Check Stock

TIMESETL 90 Pcs Diamond Burr Bits Drill Kit for Engraving Carving Rotary Tool, 1/8\(3mm) Shank, for Glass, Gemstone, Metal

  • 【Diamond Burr Bits Kit】90 pcs in 3 boxes, 1 mm, 2 mm, 3 mm head Diameter, 3mm shank, each set consists of 30 members..
  • 【Different Sharp Bits Accessories】30 style different sharp router bit can reach more carving, such as cutting, engraving, carving, touch-up and finishing, great for all types of fine detail work..
  • 【Storage Box】Plastic box is sturdy, falling resistant and moistureproof, easy for carrying and hanging. All parts were in order and set was complete, well organized to prevent scattered and confused..
  • 【Easy to Use】1/8" diameter shanks, compatible with most rotary tools including Dremel, Craftsman, Chicago and more, Ideal for home improvement, craft and whenever you need to polish, grind, drill, cut, engrave, and more..
  • 【Wide Usage】Suitable to be used with Hand Drills, Flex Shafts, Small Drilling Rigs, Pistol Drills, Pneumatic Drills, etc. Make Clean Holes in Tiles, Marble, Rocks, Ceramic, Porcelain, Gemstones. Easy to use and quick to polish..
Check Stock

HOMEIDOL Carbide Burr Set Die Grinder Bits Rotary Tool Bits 1/8 Shank 10 PC Double Cut Wood Carving Accessories Cutting Burrs Metal Grinding Engraving Polishing Porting Trimming

  • √【Material】Double cut carbide rotary burr set,tungsten carbide,can be used to process: iron, steel etc.. Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Total length: 45-50 mm( 1.77-2 inch).1/8” fits dremel tool, straight shank can be held by most rotary tool with three jaw chuck for accurate centering.Please check the size before you buy it..
  • √【Durable】Carbide rotary burr's packed with nice plastic case for safety storage and protection. High efficiency, high-quality finish, long service life, good economic returns..
  • √【High efficiency and Practical】The rotary tools processing efficiency is higher than the manual file tool. 10 different types of carving kit drill bits, meet your different needs.No wear out after a long time use. The shaft will not bend at high speed..
  • √【Double Cut Design】 The double cut burr head groove lines of the head are crossed, produces a finer finish than single cut and reduces the size of the chips and slivers. It also gives greater tool control..
  • √【A Good Rotary tool】 A good choice of DIY carving, engraving, and polishing. Suitable for multiple types of rotating tools.Making DIY carving fans much easier to do the wood carving job.It is also an ideal gift for woodcarvers..
Check Stock

5Pcs Premium Tungsten Steel Carbide Rotary Burr Set 1/4inch Shank Double Cut Carbide Burr Set 8MM Head Die Grinder Bits for Die Grinder Drill DIY Wood-Working Carving Metal Polishing Engraving

  • 【5Pcs Solid Carbide Burr Bits】The grinder drill set is made of tungsten carbide, high sharpness and good toughness, machining hardness up to HRC70, great for carving, polishing, drilling.
  • 【Metal Die Grinder Drill Bit】The rotary file is widely used for processing metal(include hardened steel) and non-metal( like wood, bone and marble), perfectly fits for die grinder and drill.
  • 【1/4” Shank Rotary Burr】Size: Shank-1/4inch(6mm), Tip Head-5/16inch(8mm), Total Length 58-65mm, Cutting Burr Shape: Ball, Round Nose, Pointed Tree, Cylinder with End Cut and Cylinder with Round Head.
  • 【Double Cut Head Design】The double burr can cut cleanly and quickly through hardened steel, with smoother surface and no dust pollution compared with grinding wheels or steel cutter.
  • 【Wide Applications】The tungsten grinding bits are widely used in woodworking carving, mold processing, burr cleaning and impeller polishing.
  • Plus package comes with plastic case for safety storage and protection.
Check Stock

AKCIAON Carbide Burr Set 20PC Rotary Grinder Burr Bits,1/8" Shank Die Grinder Bits,Professional Tungsten Double Cutting Burrs Compatible with Dremel Carbide Bits for Metal Carving Grinding Engraving…

  • ...are made of high quality tungsten carbide steel for long service life, extremely strong, good wear resistance.Die grinder bits will not easy wear after a long time of use. The shaft will not easy bend at high speed..
  • DOUBLE GROOVE DESIGN:AKCIAON double cut tungsten carbide carving bits are designed with double side, the groove lines od these carbide rotary burr's head are crossed.The surface of your target is smooth after carving or engraving, therefore it can even process a variety of high-precision mold..
  • DIFFERENT SHAPE MEET MULTI-PURPOSE:This rotary burr set includes everything you need for carving, drilling, engraving, polishing and removing sharp edges, being suitable for wood, plastic, aluminum, stone carving, metal working and die grinders.The rotary tool kit includes a massive selection of shapes for all types of cuts, with higher efficiency..
  • SMOOTH MILLINH CHIPS:No dust pollution, stable, reliable and high efficiency.It is mainly used on electric and pneumatic tools, and the speed is generally 25000-50000 rpm. When using, the tool should be clamped correctly, and the cutting mode should be reverse milling to avoi....
Check Stock

Drilax 50 Pieces Diamond Drill Bit Burr Set Grit 120 Sea Glass for Crafts Rocks Marble Porcelain Hand Drill Jewelry Making Lapidary Engraving Compatible with Dremel Tool Accessories 1/8 Inch

  • High Density Electroplated Diamond Coated Grit 120 Drill and Burr Set of 50 pcs.
  • Assorted Shapes and Sizes with 1/8" Shank - use with motor tools, drills, high speed grinders.
  • Universal fit - compatible with Dremel (R) brand tools. These burrs and not Dremel (R) brand..
  • Good for drilling - grinding - shaping - carving and engraving.
Check Stock

K Kwokker Tungsten Carbide Burr Set 1/8 Shank Diamond Files HRA85 Rotary Tool Accessory Kit, Drill Chucks Accessories for Dremel Rotary Drill Air Die Grinder for Metal Polishing, Wood Carving

  • √ [1/8" Shank 1/4" Cutting Dia Carbide Rotary Burr Set] K Kwokker 10Pcs Carbide Die Grinder Bits. Shank dia: 3mm(1/8"), Cutting dia: 6mm(1/4"), fits dremel tool accessories and most small rotary tools. 10 different types of carving kit drill bits, meet your different needs..
  • √ [Hardness HRA85, Very Well Made And Tough As Nails, Nice Tungsten Carbide] Carbide burr set made of heat-treated durable carbide that lasts long working life, packed with nice plastic case for safety storage and protection..
  • √ [Safe And Efficient, Like a Hot Knife Thru Butter] VERY IMPORTANT: SINGLE-SLOT Tungsten carbide burrs drill bits, BEST FOR: Metal, cast iron, cast steel, carbon steel, alloy steel, stainless steel and so on.
  • GOOD FOR: wood, marble, jade, ceramic, glass etc. NOT FOR: EPOXY. PLEASE USE ROTARY BURR SET ON THE CORRECT MATERIAL TO AVOID DAMAGE TO THE PRODUCT DUE TO INCORRECT USE..
  • √ [This Is a Essential Rotary Burr Set] Grinding head for air die grinder. NOTE: When using the wood carving bits, make sure that the burr handle is fully inserted into the chuck and tightly clamped. Eye masks and gloves are reco....
Check Stock

Cedilis 43-Pack Stone Carving Set - 26 Diamond Burr Bits 10 Impeller 4 Diamond Cutting Wheel Polishing Rotary Tools for Stone Rocks Jewelry Glass Ceramics Rotary Tools

  • Include 43 pack diamond burr cutting set: 26 diamond burr bits, 4 diamond cutting wheels, and 10 impellers..
  • All burrs with a 1/8" shank is compatible with rotary tools, WEN and die grinders..
  • Diamond burr bits have different shapes: ball, cone, cylinder, needle point and tapered with 3 kinds of size: 3*3, 3*6, 3*8..
  • The cutting wheels diameters are 20mm and 30mm, the impellers are 12mm and 15mm..
  • Perfect for cutting gemstones, glass, porcelain, tiles, carbide, rocks, ceramics, aluminium and copper, great for crafts, hobbies, home repair, jewelry, lapidary use, modeling, and so much more. Assorted shapes and sizes to meet all your demand!.
Check Stock

SL-3 Tungsten Carbide Burr Rotary File Taper Shape with Radius End Double Cut with 1/4\Shank for Die Grinder Drill Bit

  • ...all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed being too slow. However, it's ideal to start the cutting slow, increasing the speed as you go along. High speeds will prevent clogging in the flutes of your burrs. The 1/8 carving burrs can bear the speed range of 6000-50000 revolutions per minute..
  • 【Widly Use】The 3mm and 6mm head diameter carbide cutting burrs set is widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, cylinder head porting and sculpting..
Check Stock

aTourer Tungsten Carbide Burr Set Rotary File Rasp 1/8 & 1/4 Cutting Head Die Grinder Milling Bit 20pcs Single Burr Double Cut 20pcs

  • ...all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed being too slow. However, it's ideal to start the cutting slow, increasing the speed as you go along. High speeds will prevent clogging in the flutes of your burrs. The 1/8 carving burrs can bear the speed range of 6000-50000 revolutions per minute..
  • 【Widly Use】The 3mm and 6mm head diameter carbide cutting burrs set is widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, cylinder head porting and sculpting..
Check Stock

15 Pieces Wood Carving and Engraving Drill Bit Double Cut Carbide Rotary Burr Woodworking Drill Bits Set for DIY Woodworking Drilling Engraving Polishing Supplies

  • You will receive: the package contains 5 pieces wood carving and engraving drill bits and 10 pieces double cut carbide rotary burr, 15 pieces in....
  • Size details: wood carving tools have 5 sizes carving, 3 x 3 mm, 3 x 4 mm, 3 x 5 mm, 3 x 6 mm, 3 x 7 mm, 3 x 8 mm in shank and bit diameter.
  • Durable to use: the wood carving and engraving drill bits are made of high-speed steel, and the double cut carbide rotary burrs are made of tungsten....
  • Easy to use: the 1/8 inch handle fits most rotating tools, just install it like any other typical drill bit easily, will be your ideal choice for DIY....
  • Functional tools: our practical tool accessories provide you delicate fine processing, widely applied in metal, woodworking, model engineering,....
Check Stock