ReviewsDiamond Cutting

Delta Diamond Cougar HS 12 Inch Segmented Diamond Saw Blade Premium General Purpose Cutting of Concrete Masonry Pavers Stone .125 X 1 -20mm Arbor 12

GENERAL PURPOSE - Cougar HS diamond saw blades are for general purpose cutting of soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
SPECIFICATIONS - 12" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 6,300 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between t....

Check Stock

SHDIATOOL Metal Cutting Diamond Blades Set of 2 Pieces

1PC Metal Cutting Diamond Disc plus 1PC All Purpose Metal Cutting Blade.
Metal Cutting Diamond Discs are specially designed for cutting steel tube, iron rebar (Less than dia 25mm), angle steel.
All Purpose Metal Cutting Blade has Wide Application - Granite, Marble, Aluminum, Steel, Wood....
No risk of break of disc,so much safer than abrasive cut-off wheel.
Blades are made with high hardness diamond, could be used for cutting all ferrous and non-ferrous metals, with a Lower Cost per Cut.

Check Stock

53

APPLICATION: Designed for rotary tools and replacement EZ545/544 lock cut off wheel..
HIGH QUALITY AND DURABLE: The alumi/num oxide cut off discs are thin and sharp. It is completely coated with fine diamond particles..
MULTI-PURPOSE: This diamond grit cutting wheel are suitable for doing DIY, cutting, sawing, carving, sharpening and filing hard..
ATTENTION: For your safety, please must wear gloves and goggles and be care around spark when using mandrel diamond cutting tools. It may become very hot when cutting, add some water to keep it cool..

Check Stock

JIUNENG 4-1/2 inch Diamond Saw Blade Set,Continuous Segmented Turbo Rim Dry Wet Circular Saw Cutter 7/8\ Arbor with 5/8\ Adapter for Tile Masonry,3 Pieces

【Quality Material】The diamond cutting blades are manufactured with durable heat-treated manganese steel and diamond. This angle grinding set has 3 of the most used cutting saws to make sure you are always ready for any project..
【Turbo Rim】For cutting most materials including concrete, stone, marble, granite, brick, masonry and curb..
【Segmented Rim】With diamond segments teeth,for fast general purpose cutting stone, marble, granite, brick and masonry..
【Continuous Rim】 Has high content of soldered diamond segment that makes its ideal for cutting granite,ceramic and tile smoothly..
【Wear-Resisting】 Our blades are suitable for DRY & WET CUTTING and can SELF-SHARPEN by erasing diamond grits during operation(2 or 3 cuts on silicon/abrasive stone)..

Check Stock

Gunpla 3 Pieces 4-1/2 inch Diamond Cutting Blade Continuous Segmented Turbo Rim Dry Wet Circular Saw Cutter Angle Grinder Disc 7/8 inch Arbor with Reducing Ring 5/8 inch for Tile Masonry

QUALITY MATERIAL: Gunpla diamond cutting blades are manufactured with high quality and durable heat-treated manganese steel and diamond. This angle grinding set has 3 of the most used cutting saws to make sure you are always ready for any project..
3 PIECES SET: The includes 1 continuous rim for smooth cutting of marble, granite, tile & ceramics, 1 segmented rim for fast cutting for masonry, concrete, pavers, terrazzo, roof tile and 1 turbo rim diamond cutting saw blade..
CONVENIENT CUTTING: Fashioned to provide exceptional and efficient cutting performance, Gunpla diamond grinding saw blades ensure quick and precise cuts with clean and perfect results..
PERFECTLY HONED: Our cutting diamond blades perfectly sharpened to ease use and can be used several times before any new honing. They have a thinner kerf that favors increases the cutting speed and minimize dust..
IDEAL FEATURES: Diameter: 115mm (4.5inch).
Arbor size: 7/8 inch(22.2mm) with reduce ring 5/8 inch(16mm).
Speed max. 80m/s and can used dry or wet. Balanced plate reduces vibration for improved accuracy and better finish..

Check Stock

MANTISHARP General Purpose Continuous Rim Diamond Blade,4-1/2 inch ,for Angle Grinders & Tile Saws ,Porcelain, Ceramic, Slate, and Other Masonry. 5/8”, 20mm & 7/8” Arbors, MGP-F4501. (1 PC)

All-Purpose Diamond Saw Blade – Offering multipurpose applications this 4 ½ inch diamond blade can be used for cutting all types of masonry materials including Porcelain, Ceramic and Slate for both indoor and outdoor construction jobs..
Premium Diamond Grit – MANTISHARP 4 ½ diamond blade for angler grinders and tile saws use larger diamond grits for a higher-density abrasiveness to cut through materials faster, more safely, and with increased efficiency..
Direct High-Heat Press Sintering – Superior to standard heat or cold press diamond cutting blades ours was built using direct high-heat which improved temperature performance for cut efficiency, extended life, and longer working periods..
Stronger Brass Adapter – This diamond cutting blade uses a brass adapter over nickel plate which is thicker and offers a more reliable hold thanks to a 5/8” fit and 20mm arbor. This means a tighter fit with no vibration on handheld machines..
Super Thin Rim – Our diamond tile saw blade with #65Mn steel core is heat-treated to withstand wet or dry cutting and boasts a 1.8mm rim for sharper, faster cutting and a thinner kerf to provide more precision cuts with consistency..

Check Stock

Delta Diamond Cougar HS 14 Inch 3-Pack Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .125 X 1\-20mm Arbor (14\ 3pcs)

GENERAL PURPOSE - Cougar HS diamond saw blades are for general purpose cutting of soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
SPECIFICATIONS - 3 Pack of 14" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond bet....

Check Stock

Delta Diamond Brick Boss 14 Inch Diamond Blade, 1\-20MM Arbor, Wet/Dry Cutting Brick, Pavers, Stone (14\)

BRICK CUTTING - Use Brick Boss diamond blades for cutting brick (up to 5,000 psi), most types of stone such as granite and quartzite and similar materials. Not intended for use on materials such as concrete, asphalt, concrete block or sandstone..
EXTRA WIDE U SHAPED SLOTS - Features 10MM tall diamond segments with deep and wide U shaped slots. The wide slots allow for better cooling and faster removal of the cutting debris, thereby increasing cutting speed..
HEAT TREATED HIGH-SPEED STEEL - The core is made from heat-treated high-speed steel and is guaranteed to withstand the demands of dry cutting..
SPECIFICATIONS - Blade measures 14" diameter X .125 (1/8") thick with a 1" arbor hole and 20mm bushing for Stihl power saws. It can be used on masonry saws, hand-held power saws and bridge saws. Operating RPM is 2,500. Max. safe RPM is 5,460..
LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the d....

Check Stock

LSA 14 Inch Concrete Saw Diamond Blade,U Shape Carbide Tipped 14 Inch Turbo Segmented Saw Blade,for Concrete Block,Paving Brick,Reinforced Concrete

【Specifications of 14 Concrete Saw Blade】 Segment height 12mm. Arbor 1 inch -25.4mm. MAX RPM 5460 r/min.The holes on core decrease weight and improve cooling,turbo blades remove the debris easily..
【Diamond Sand】 The high density of emery makes the LSA 14 in. segmented diamond blade tip super hard to achieve fast cutting, smooth cut without burrs,extremely fast cutting speed..
【Wet and Dry】 The LSA 14 diamond blade concrete dry cut ensures a smooth cut, while the wet cut gives you the same feeling as cutting butter to maximize cutting life while reducing the cost per cut..
【Applicable Cutting Materials】Concrete block,paving brick,cured concrete,reinforced Concrete can be cut with 14 inch diamond blade stones, but not for cutting metal, plastic, glass..
【Applicable Models】Hand held saw,masonry saw and walk behind saw.Premium diamond U shape teeth can less stress on the operator and machine..

Check Stock

Ettonsun 4 Pcs Diamond Oscillating Tool Blade, Flush Cutting Oscillating Multitool Saw Blades for Grout Removal, Cleaning Mortar Compatible with Dewalt Bosch Dremel Rockwell Makita Fein Multimaster Milwaukee and more

【Super Value Grout Removal Tool】-- Packed of 4 pcs 1.42 inch flush cutting diamond oscillating blades, with diamond cutting edge for long life in tough applications..
【Precise & Clean Cut】-- The diamond grit kerf design of the oscillating blades provides precise and clean cutting effect. Oscillating multitool blade is particularly suitable for precise cutting and short cutting as well as precise working right into corners and on edges..
【Design for Tough】-- This diamond grit oscillating multi tool blade is used to remove defective tile grout, clean up the mortar, plaster, and porous concrete to clean and rework planked deck joints. It can achieve application like finishing the installation of electronics and cutting through grout, cement board and even concrete, digging out a grout job on a tile floor around some door frames, cutting panel to install outdoor outlets, etc..
【Application Scenarios】-- These diamond oscillating saw blades can be used for bathroom renovation, flooring work, trimming and correcting work, remove grits or grouts, clean up the mortar before fixing, and various household maintenan....

Check Stock

Diamond Cutting Wheel 40PCS (25mm/22mm/18mm/16mm Each 10) with Mandrel (3mm) 8pcs for Dremel Rotary Tool

Package Includes: 40pcs diamond cutting wheel, Mandrel 8pcs..
Size: 25mm/22mm/18mm/16mm. Mandrel diameter: 3mm..
Material: Diamond cutting wheel is uniformly coated with diamond particles..
The product is sharp and sturdy and is suitable for cutting gems, glass, ceramics, porcelain and ceramic tiles. Suitable for most rotary and air tools..
Note: It may become very hot when cutting, add some water to keep it cool. For your safety, please must wear gloves and goggles when using diamond cutting wheel..

Check Stock