ReviewsDiamond Cutting Bit

PHITUODA 1-3/4 Inch / 45mm Diamond Drill Bits, Diamond Hole Saw Hollow Core Drill Bits for Glass Ceramic Porcelain Tiles Marble Granite Quartz

  • *Package Included: 1 x Diamond Drill Bits. Cutting Hole Diameter is 1-3/4" / 45mm, Shank Diameter is 3/8" / 9.8mm, Total Length is 2.18" / 55.4mm..
  • *Quality Selection: These diamond drill bits are made of high-speed steel which is high quality and durable. With a nickel-plated coated body to resist corrosion, which has a long service life. Large chip holes to ensure that when the punching smooth, punching accurate..
  • *Smoothly Cutting: A thicken diamond dust coating on the tops offers superior cutting strength for creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure, and increased use of water lubrication will extend drill bit life considerably..
  • *Multiple Applications: The diamond drill bit can remove a complete 45mm diameter hole on glass, tiles, granite, ceramic. In addition to cutting holes for glass, the Hole Saw comes in handy for tile bottles, blocks jars, fiberglass, porcelain tile, ceramic, slate, marble, light stone. Not for use on Concrete or for depths beyond about 1/2"..
  • *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident you....
Check Stock

PHITUODA 4-1/2 Inch / 115mm Diamond Drill Bits, Large Diamond Hole Saw Hollow Core Drill Bits for Glass Ceramic Porcelain Tiles Marble Granite Quartz

  • *Package Included: 1 x Diamond Drill Bits. Cutting Hole Diameter is 4-1/2" / 115mm, Shank Diameter is 3/8" / 9.6mm, Total Length is 2.19" / 55.6mm..
  • *Quality Selection: These diamond drill bits are made of high-speed steel which is high quality and durable. With a nickel-plated coated body to resist corrosion, which has a long service life. Large chip holes to ensure that when the punching smooth, punching accurate..
  • *Smoothly Cutting: A thicken diamond dust coating on the tops offers superior cutting strength for creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure, and increased use of water lubrication will extend drill bit life considerably..
  • *Multiple Applications: The diamond drill bit can remove a complete 115mm diameter hole on glass, tiles, granite, ceramic. In addition to cutting holes for glass, the Hole Saw comes in handy for tile bottles, blocks jars, fiberglass, porcelain tile, ceramic, slate, marble, light stone. Not for use on Concrete or for depths beyond about 1/2"..
  • *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident y....
Check Stock

Mgtgbao 8PCS Black Dry Diamond Drill Bits Set, Ceramic Tile Core Drill bit for Many Hard Materials Granite Marble Tile Ceramic Stone Glass (NOT for Wood) Round Shank with Size 3/16~1/2 inch.

  • ☪Upgraded Dry Drilling Design : Mgtgbao Diamond Drill Bit integrated with wax lubricant inside which melts while dry drilling and cools the cutting surface.
  • Water can be used as additional cooling to prolong the life of the bit. Surface plating can prevent the drill bit from rusting..
  • ☪Multiple Size Dry Diamond Core Drill Bit: The diamond drill bit set contains 5 pieces of dry diamond bits different sizes, including 2pc 3/16” (5mm), 2pc 1/4” (6mm), 2pc 5/16” (8mm) , 1pc 3/8” (10mm), 1pc 1/2” (12mm) fit your need..
  • ☪Widely Compatibility: black diamond drill is designed in round shank, which is compatible with most machines, such as hand drill, angle grinder, bench drill, also can be matched with side flutes help to remove debris and drill holes smooth and fast.
  • Depth mark is also useful for precise project..
  • ☪Easy To Carry: These Diamond drill bits are prevented from being in a gray box, and can be put back into the box for storage after you use it..
  • ☪Wildly Application: Mgtgbao dry diamond drill set can be applied for drilling clean holes to hard materials, which especially fits well for tiles, porcelain ground, granite ceramic glass mirror marble stone masonry brick and so on.
Check Stock

Mgtgbao Green 6PCS Dry Diamond Drill Bits Set, Core Drill bit for Many Hard Materials Granite Marble Tile Ceramic Stone Glass (NOT for Wood) Hex Shank Diamond Hole Saw Kits with 3/1 6to 9/16

  • ☪Upgraded Dry Drilling Design : Mgtgbao Diamond Drill Bit integrated with wax lubricant inside which melts while dry drilling and cools the cutting surface.
  • Water can be used as additional cooling to prolong the life of the bit. Surface plating can prevent the drill bit from rusting..
  • ☪Multiple Size Dry Diamond Core Drill Bit: The diamond drill bit set contains 7 pieces of dry diamond bits different sizes, including 1pc 3/16” (5mm), 1pc 1/4” (6mm), 1pc 5/16” (8mm) , 1pc 3/8” (10mm), 1pc 1/2” (12mm) , 1pc 9/16” (14mm) fit your need..
  • ☪Widely Compatibility: black diamond drill is designed in round shank, which is compatible with most machines, such as hand drill, angle grinder, bench drill, also can be matched with side flutes help to remove debris and drill holes smooth and fast.
  • Depth mark is also useful for precise project..
  • ☪Easy To Carry: These Diamond drill bits are prevented from being in a gray box, and can be put back into the box for storage after you use it..
  • ☪Wildly Application: Mgtgbao dry diamond drill set can be applied for drilling clean holes to hard materials, which especially fits well for tiles, porcelain ground, granite ceramic glass mirror marble stone masonry brick and so on.
Check Stock

DKIBBITH 1 Inch Dry Diamond Core Drill Bits, 25mm Tile Vacuum Brazed Angle Grinder Hole Saw for Porcelain Ceramic Granite Brick Concrete with 5/8-11 Thread to 3/8” Hex Shank Adapter, Black

  • 1″ Dry Diamond Core Drill Bit – Great tool to add to your collection for cutting holes for split AC units plumbing, shower/tub grab bars, shower plumbing, faucet and more projects.
  • Work with Angle Grinders and Electric Drills – Package including a 1 Inch Diamond Hole Saw with 5/8-11 female thread for most Angle Grinders, as well as an arbor to 3/8” Hex Drill Shank which can fit in Power Drills..
  • Excellent Hole Saw for Rough Materials – Fast clean cut through stucco, bricks, concrete, ceramic tile, porcelain, tabby stone, brick, mortar, granite, marble, quartz, etc. Both Dry and Wet will do, and vac will be helpful for dry drilling.
  • Sharp and Durable – Vacuum Brazed Diamond Core Bit chews through materials with ease and minimal wear.
  • stays sharp longer than other masonry hole saw bits as long as taken good care to cool sufficiently.
  • User Tips – When starting the hole, tilt the high-speed bit at a 45-degree angle to touch the surface, then slowly move the drill back upright and let the tool do the cutting, you will have minimal bit walking and create smooth.
Check Stock

TOMMARS Diamond Drill Bits Set 5 Piece Diamond Hole Saw for Tile Ceramic Marble Granite Ceramic Porcelain 1/4, 5/16, 3/8, 1/2 inch

  • Tech information: Diameter 1/4 inch(6mm), 5/16inch (8mm), 3/8inch (10mm) & 1/2 inch (12mm).
  • The tile drill bit set is equipped with a 1/4 inch hexagonal shank and is therefore compatible with all common drills & cordless screwdrivers..
  • Diamond Drill Bit integrated with wax lubricant inside which melts while dry drilling and cools the cutting surface. This allows for longer drilling without much wear on larger projects..
  • Diamond core drill bit developed to drill in extremely hard materials such as tile, ceramic, marble, granite, ceramic, porcelain, etc..
  • Attention: Begin drilling approximately at a 45° ( between the hole saw and the working surface ) angle and only moderate pressure is good for the service life of the dry core bit..
Check Stock

Diamond Core Drill Bit Set - for Porcelain Tile Ceramic Marble Granite Drilling,BRSCHNITT 1/4' 5/16' 3/8' 4/5' 1' 1-3/8' 1-1/2' 2' 2-1/2' (6 8 10 20 25 35 38 50 65mm) Vacuum Brazed Diamond Hole Saw with 5/8-11 Thread

  • ✔Size Diamond drill bit--1/4" 5/16" 3/8" 4/5" 1" 1-3/8" 1-1/2" 2" 2-1/2" (6 8 10 20 25 35 38 50 65mm), diamond height 10mm, total length 60mm, 5/8-11 thread.
  • ✔Size Diamond blade:5 inch (125mm),diamond height 10mm ,segment thickness 1.2mm ,Arbor 7/8"(22.23mm) , wet or dry cutting.
  • ✔Wide Application of drill bit --Worked great for porcelain tile, ceramics, bathroom tile,marble granite,stone,masonry, brick with ease,Using water could prolong the lifetime.
  • ✔Wide Application of blade --A blade engineered for extremely smooth cutting of porcelain tile, ceramic tile, marble, granite,masonry and other natural stone.
Check Stock

1 1/4 Inch (32mm) Diamond Hole Saw with Pilot Bit, 2 PCS DaduoRi 1.25 Inch Tile Tip Coated Hole Saw with Guiding Drill Bit in The Center for Glass, Porcelain Tile,Ceramics, Marble and Granite

  • 【2 PCS 1-1/4 inches Diameter Hole Saw 】Cutting Hole Diameter: 1-1/4" / 32mm.
  • 【With Spear Shaped Center Pilot Drill Bits, Easy to Get Started 】DaduoRi hole saw with center guiding drill bit make you more easy to locate the center to start drilling on a smooth tile surface. No need to spend time making extra jig guides..
  • 【Triangular Shank Design, Firm Grip by drills】Compared with other hole saws, DaduoRi diamond coated hole saws is designed with a triangular shank, which can better work with the drill..
  • 【Thickened Diamond Coating, More Wear-Resistant 】DaduoRi team attached the importance of diamond tip of the glass drill bit, not only using superior diamonds, but also thickening the diamond coating to make this pilot hole drill bit more wear-resistant and high-temperature resistant..
  • 【Solid Steel Body, no welding deformation 】Made by High-quality 45-gauge steel.The shaft is centered and does not wobble during use..
  • Fast drilling on glass, porcelain tiles, granite, ceramic, quart, flower pot, light stone and fiberglass. Can't use for Metal and Concrete..
Check Stock

32mm TCT Hole Saw, 1-1/4” Cutting Diameter Tungsten Carbide Tipped Hole Cutter Opener, for Stainless Steel Metal Plate Aluminum

  • Tungsten carbide-tipped cutting edges last longer and can be run at higher rates and speeds, cutting diameter is 32mm(1-1/4"), effective depth is 25mm(1”)..
  • Well made of high speed steel, with extremely sharp blade, low consumption and durable, provided impact resistance, wear resistance..
  • Edge coated with diamond to enhance the drilling speed and creates a sharp, high precision and smooth cut without broken..
  • Integrated design: including drill bit, spring, hex wrench. Split point pilot drill bit prevents the bit from walking..
  • Fast and precise cutting for stainless steel, sheet metal, fiberglass and wood..
Check Stock

Diamond Drill Bit Set,10 Pieces Diamond Hole Saw, Glass Hole Saw for Tiles Glass, Ceramic, Porcelain, Marble, Bottles, DIY,6mm - 30mm

  • Small resistance: It has the advantages of low resistance to cutting, fast opening, easy chip removal, etc. It also facilitates accurate opening.Large chip evacuation holes ensure smooth and accurate punching..
  • Robust and durable: Nickel plated with diamond powder coating provides superior performance and cutting strength for extended life. High quality and performance, this diamond bit is perfect for making clean and accurate holes, making it your best choice..
  • Versatile: This diamond coated bit can remove a full circle from glass, ceramic, porcelain, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass or other materials..
  • Applicable drill models: Can be used with three-claw/round shank ordinary bench drill, hand electric drill or rechargeable drill(not included), as long as the tool chuck can be adjusted to 6-10MM are available. Note: Not suitable for electric hammer, electric pick electric grinding pen.Water is required for lubrication when drilling, otherwise the diamond coring drill will burn. WARNING: Not for use with concrete or depths greater than approximately 1/2"..
  • 10 sizes:No markings for size on the item.There are 10 different sizes (6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mm, 22 mm, 30 mm), different size....
Check Stock

Diamond Core Drill Bit Set - BRSCHNITT Diamond Hole Saw Kit for Porcelain Tile Ceramic Marble Granite Drilling Triangle Shank 11pcs 6/8/10/20/25/28/32/35/50/65mm bits &2“ Chamfer bit

  • ✔Size Diamond drill bit -1/4" 5/16" 3/8" 4/5" 1-1/8" 1" 1-1/4" 1-3/8" 2" 2-4/7"（6/8/10/20/25/28/32/35/50/65mm bits &2“ chamfer bit）diamond height 10mm, total length 65mm,with Triangle Shank.
  • ✔Size Diamond chamfer bit :2" Inch (50mm), 50 mm workable length, Grit #80,with Hex Shank total lenght 70mm Top Angle 60 degree,.
  • ✔Wide Applications --Diamond core bits are worked great for dry drilling holes through hard porcelain tile, ceramics,bathroom tile,granite & marble, masonry, concrete, glass, hard plastic with ease. Using water could prolong the lifetime.
  • ✔Super Quality Raw Material --Using vacuum brazed technology ,which increases resistance to temperature and friction,to make the diamond particles better attach to the core steel,imporve the performance and lifetime.Constructed with high grade diamond grit for effortless cutting and improved durability in tough applications.High-quality core steel body helps to be more efficient and durable, not easy to deform.
  • ✔Machine --Suitable for any electric drill,h....
Check Stock