ReviewsDie Steel 1 2080

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • ...1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

LOUDERLUN Bead Roller Forming Set 9 Dies 1 Polyurethane Roll Tipping 22mm shaft

  • Includes 9 steel dies and 1 polyurethane lower wheel.
  • Hem edges, create offsets and flanges, form style lines, contours and channels.
  • Kit includes the following: Polyurethane Lower Wheel, 180 degree lower die, Inside offset die , Outside offset die , Knife edge tipping die , Lower....
Check Stock

Ridgid 47760 Universal Die Head 1/4-3/8 NPT HS

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

Bead Roller Round-Over Dies Commplete Set Cr12

  • 1.Material:Cr12, Rockwell Hardness = 40 HRC.
  • 2.Radius Dies Includes 4 piece set: 5/16 inch radius die set 1/2 inch radius die set 1 inch radius die set 1-1/2 inch radius die set.
  • 3.Round-Over Dies can produce smooth, even, large-radius edges in steel and aluminum.
  • 4.The Bead Roller Dies Fits for Most Bead Rollers With 22mm Shafts.
  • 5.For Radius Edges of Sheet Metal,Bead Roller Sheet Metal.
Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

uxcell 5/8-11 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

uxcell 5/8-24 UNEF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller (....
Check Stock

uxcell 3/8-16 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

TEMCo TH0364 Dimple Die for 1-1/4” Actual Hole Size

  • Dimple Die for 1-1/4” Actual Hole Size.
  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • This dimple die set creates flared holes. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • Recommended Compression Tool: TEMCo Industrial TH0037 Knockout Punch Set or any other electricians knockout punch set..
Check Stock

uxcell 1/2-13 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. Th....
Check Stock

uxcell M2.5 x 0.45 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock