ReviewsDie Tool Steel

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

Wire Crimper Tool Qibaok Ratcheting Insulated Wire Terminal Connectors Crimping Tool for AWG20-10

  • CRIMPING WIRE SIZE AWG20-10:Steel jaw contains color-coded wire size markings for red (20-16 AWG), blue (16-14 AWG), and yellow (12-10 AWG) terminals..
  • HIGH QUALITY MATERIAL:This Wire crimping plier kit is made of high quality Alloy steel. It is a high strength hand tools for your home improvement..
  • RATCHETING DESIGN:There is a ratcheting mechanism design for this Insulated terminals crimping tool, one-hand operation could make a perfect crimp. And you can take less strength..
  • DOUBLE CRIMPING DIE:Double crimping die creates a secure crimp that resists pull-out.Ratcheting function allows you to secure a wire connector in the die before inserting the stripped wire into the barrel..
  • QUICK RELEASE LEVER:Quick release lever frees the crimper jaws in any position and when double crimp is complete, acts as a built-in safety measure that can open the handles whenever tool is jammed or stuck..
Check Stock

JRready ACT-3P1 BNC Crimping Tool Crimp Die Set , RG58,59,62,6 Coaxial Cable BNC Connector Crimp

  • 【 CRIMPING RG TYPE CABLE】 RG6,59,62,140,210, BELDEN 8279,55,58,141,142,223,303,400 Bnc Cable, Fiber Optic..
  • 【 CRIMP SIZE】 .255"/.213"/.098"/.068"/.321" (6.48/5.41/2.49/1.73/8.15mm).
  • 【 HIGH QULITY MATERIAL】 The crimping tool dies are made of Alloy Steel (AISI- 4140), after heat treatment the hardness can reach HRC44-51°, High-quality carbon steel is more resistant, stronger and not easy to deform, can be used for many years..
  • 【 DIE SET ONLY】 Use multiple crimping dies with the same crimping tool, only need change the die set can save your money..
  • 【 HIGH PRECISION】 High-precision crimping makes your work better and easier. We JRready pursue high-tech precision, so that each unit is accurate to the smallest range in the electrical tool professional field..
Check Stock

ABN Power Punch Heavy Duty Hole Punch Set – Metal Hole Punch, Heavy Duty Hole Puncher Hand Punch 3/32in to 9/32in

  • PUNCH HOLES IN YOUR PROJECT: The ABN Hole Punch Tool is a heavy duty punch and dies kit that has a high-leverage design and comfortable grips that allow you to manually create clean holes through sheet metals up to US 16 gauge.
  • For mild sheet steel, aluminum, brass, polyurethane, plastic, canvas, cardboard, paper, shoe.
  • Additionally use as a leather punch, belt hole puncher, metal hole punch for jewelry, and watch hole puncher.
  • Not recommended for stainless steel such as silverware and utensils.
  • PERFECT SIZE: Creates holes that are from 3/32-inch to 9/32-inch in diameter and includes a stop gauge for consistent spacing.
  • 7 sizes of punches and dies include 3/32-inch (2mm), 1/8-inch (3mm), 5/32-inch (4mm), 3/16-inch (4.5mm), 7/32-inch (5.5mm), 1/4-inch (6mm), 9/32-inch (7mm).
  • 1.75-inch (4.4cm) throat depth to punch holes as close as 1.75 inches away from material edge.
  • EASY TO USE: This sheet metal punch uses interchangeable heads to pierce holes in a material of your choosing.
  • Select a proper size punch and die, remove nut near handle using die adjustment tool, move connection bar, place punch on the head of hand punch, rotate nut by again using the adjustment tool to adjust caliper, and set distance between the edge and the hole.
Check Stock

uxcell C Hook Spanner Wrench Collet Chuck for 55-62mm Round Nut, with Red Non-slip Handle

  • ✿Die Handle Wrench: This die holder wrench can be used to make and repair threads, clamping range: M22-M26 / 22mm-55mm..
  • ✿High-Quality Material: Die stock handle wrench is made of high-quality tool steel, sturdy and durable, the surface is polished and chrome-plated, rust-resistant and corrosion-resistant..
  • ✿Wide Range of Application: Die wrench handle can be used for surface treatment of low-carbon steel or aluminum materials, widely used in construction, car repair, DIY home decoration projects, factories, etc..
  • ✿Package Contains: 1 x round die stock handle wrench, total length: 19.5 inch / 495mm, fixed by 5 adjustable screws..
  • ✿About Service: We are committed to providing customers with high-quality products. If within 30 days you are not 100% satisfied with the product, such as buying the wrong size, please feel free to contact us, we will within 24 hours provide you with a satisfactory solution..
Check Stock

Ridgid 47760 Universal Die Head 1/4-3/8 NPT HS

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

Weiler 11110 0.006\ Wire Size, 302 Stainless Steel Bristles, Banded, Solid End, Stem-Mounted Crimped Wire End Brush, Made in the USA

  • For cleaning and polishing die, mold, tool, rust, paint, scale, slag, and rubber/plastic flash removal.
  • For use with die grinder and right angle air die grinder power tools.
  • Banded brushes provides shorter trim length and prevents flaring.
  • Stainless steel fill brushes are great for working on stainless steel or aluminum surfaces.
  • Brush dia 1/2 in, fill dia .006 in, trim length 9/16 in, overall 2-9/16 in, made in USA.
Check Stock

Weiler 11112 0.006\ Wire Size, 302 Stainless Steel Bristles, Banded, Solid End, Stem-Mounted Crimped Wire End Brush, Made in the USA

  • For cleaning and polishing die, mold, tool, rust, paint, scale, slag, and rubber/plastic flash removal.
  • For use with die grinder and right angle air die grinder power tools.
  • Banded brushes provides shorter trim length and prevents flaring.
  • Stainless steel fill brushes are great for working on stainless steel or aluminum surfaces.
  • Brush dia 3/4 in, fill dia .006 in, trim length 7/16 in, overall 2-11/16 in, made in USA.
Check Stock

IWISS SN-PM Wire Crimping Tool & Wire Stripper Set 8 Pieces Quick Changing Die Sets for Heat Shrink Terminals Open Barrel Terminals MC4 terminals Insulated & Non-insulated Connectors

  • Purpose: SN-PM is an all-in-one wire terminal crimping tool set which includes an SN series compact crimper, 5 quick changing die sets, one wire....
  • 5 Pieces Die Sets: SN-PM wire crimper tool kit includes 5 quick changing die sets work with heat shrink, insulated nylon/vinyl terminals, open....
  • Wire Stripper: Ideal for copper and aluminum cables from 10-22 AWG. Multifunctional stripper & cutter. Built in shear cutter cuts solid or stranded....
  • Applications: Wire crimping tool set(8 pieces) ideal for electrical wiring projects in DIY, electronics, RV refit, RC race car, automotive audio,....
  • Compact Storage: Crimping tools are steel construction with comfortable cushioned grip handles. Supplied in a durable, plastic molded storage case..
Check Stock

ele ELEOPTION Electric Cutter for 3.5"x2" Card, Automatic Business Card Cutter Binding Machine-110V

  • The desktop CR80 all metal manual PVC card die cutter, cutting size is 2-1/8"x3-3/8" (86×54mm) Standard CR80 (ID-1) with rounded corners. Cutter life-span is more than 100,000 times and cutting thickness is less than 0.03inch(0.8mm). It is a great tool for both professional and occasional users..
  • Long arm handle allow powerful cutting with ease. All heavy-duty metal base, steel blade with excellent edge, long arm of force power-saving Handle..
  • Blade gap is 0.0003-0.0006inch (0.008-0.015mm), round four corners of the card at one time. Easy and accurate positioning and cut neatly..
  • The business card cutter is designed with hardened steel cutting die, die-cast steel base and long arm of force power-saving design handle, which can help you cut out more easily than other die cutters..
  • With this all metal Card Round Corner machine, you can cut the business cards, credit cards, membership cards, driver's license cards, PVC ID cards and wallet size photos..
Check Stock

YON.SOU. Air Die Grinder - 1/4\

  • ...nd precise to control with a clear view of working surface. You wouldn't worry about tight spaces and small jobs anymore with this 90 degree die grinder..
  • ⚙️ POWERFUL AND DURABLE: The pneumatic die grinder features a 0.3 HP motor whose free speed could be up to 20,000 RPM. Inner movement part is made of tungsten steel which could be more resistant to high temperature to prevent overheat. This 1/4" die grinder has long service life with aluminum housing and ball bearing construction..
  • ⚙️ COMPACT&LIGHTWEIGHT DESIGN: The compact and lightweight designed pneumatic angle die grinder is super easy for maneuverability and brings more accuracy, ergonomic designed die grinder body is perfect for one-handed grip. The 90 degree angle head brings more accuracy and possibility to those tight spots and hard reaching jobs..
  • ⚙️ SAFE&EASY to USE: The safety lock of the air angle grinder could prevent accidental engagement, you wouldn't get hurt even if you just start to learn to use the air die grinder. The air inlet filter could keep the die grinder from contamination. Built-in regulator makes it easy to control air die grinder's speed..
  • ⚙️ VARIOUS APPLICATIONS: This angle die grinder tool is air-powered, you should connect the air grinder to an air comp....
Check Stock