ReviewsDie casting Zinc Products

Attwood 14531-6 Marine Fuel Tank and Hose Fittings Mercury/Mariner

  • Durable die-cast zinc for long-lasting performance.
  • for use with leaded, unleaded, Ethanol-blended, and alcohol-blended fuels.
  • Standard 1/4 inch NPT thread with barbed fittings for 3/8 inch I.D. (inside diameter) hose.
  • Specifically designed for Mercury/Mariner Brand engines and tanks.
  • Attwood products are both compatible and reliable, engineered and built with a never-fail attitude.
Check Stock

Amphenol CS-VHDCIMX200-006 VHDCI SCSI-5 Cable, VHDCI Male to Male, 6 m, 20', Black

  • SCSI-5 (VHDCI) 0.8mm 68-pin stackable SCSI cable by Amphenol AIPC.
  • 100% double shielded twisted pair design for superior EMI/RFI rejection.
  • VHDCI 0.8mm 68-pin male to male die-cast SCSI connectors pre-installed.
  • Lead-Free PVC cable jacket with zinc die-cast backshells for durability.
Check Stock

ProConnex AMC-50 BX/Flex MC/Connector，1/2-Inch，Single hole (6-Pack)

  • Terminates AC, MC or FMC/RWFMC to a 1/2-in knockout with no tools required.
  • For aluminum or steel 14/2 - 10/3 AC and MC, and 3/8-in FMC/RWFMC.
  • Zinc die-cast construction with an insulated throat for wire protection.
  • If you are not satisfied with the purchase of our connector products, please contact us via email..
Check Stock

Amphenol CS-VHDCIMX200-002 VHDCI SCSI SCSI-5 Cable, VHDCI Male to Male, 2 m, 6.6', Black

  • SCSI-5 (VHDCI) 0.8mm 68-pin stackable SCSI cable by Amphenol AIPC.
  • 100% double shielded twisted pair design for superior EMI/RFI rejection.
  • VHDCI 0.8mm 68-pin male to male die-cast SCSI connectors pre-installed.
  • Lead-Free PVC cable jacket with zinc die-cast backshells for durability.
Check Stock

XLR Female to Female, CableCreation [5-Pack] XLR 3 Pin Female to 3 Pin Female Microphone Line Adapter

  • Professional Series XLR Plugs , Compact design with sturdy die-cast shell.
  • Designed to change an XLR output into an XLR input.
  • The Housing for high strength zinc alloy die-casting nickel plating, attractive and durable.
  • Easy to assemble, Protective Shielding for low RF and EMI noise.
  • Package include: 5 x XLR Female to Female connector.
Check Stock

OSOYOO Omnidirectional Mecanum Wheels Robotic Car Kit for Arduino Coding Students Based on Mega2560 Introduction

  • 【Precision die casting】The bevel gears are made of zinc alloy material by accuracy die casting.
  • 【Strong compatibility】The product can compatible with for FRC and other world robot competitions.
  • 【Good quality and durable】High wear resistance, high strength and high rigidity.
  • 【Easy to replace】Including 2 sets of bevel gear and bearings, convenient to replace.
  • 【Exquisite and reasonable】Fine processing and reasonable design, good accessories for industrial robots.
Check Stock

KY-2 & KY-2AB Key Set Reproduction Brass & Antique Brass Hollow Barrel Key Antique Cabinet & Grandfather Clock Door Key + Free Bonus (Skeleton Key Badge)

  • Best reproduction of antique skeleton keys. Looking better than the original keys.
  • These keys can be used for all most popular grandfather clocks, antique cabinets, cupboards and other vintage furniture locks.
  • Package contains two skeleton keys and free bonus – one skeleton key badge. KY-2 made of die cast zinc with brass plate and KY-2AB die cast zinc with applied antique brass finish.
  • Overall Length: 2 3/8″     Shaft Length: 1 1/2″     Bit: 3/16″ Wide x 3/16″ Tall     Inner Barrel Diameter: 5/32″     Sizes are Approximate.
Check Stock

CMFG AK1834 Bored-to-Size V Belt Sheaves 3/4 Inch Bore,1.85''OD, Cast Iron, Single Groove for A Belt

  • V belt drive pulley is a compatible replacement part for Chicago Die Cast 250A.
  • Groove Angle : 34° , Inside Diameter: 5/8" , Outside Diameter : 2-1/2".
Check Stock

WINSINN GT2 Idler Pulley 20 Toothless 8mm Bore 10mm Width Timing Pulley Wheel Aluminum for 3D Printer (Pack of 5Pcs)

  • V belt drive pulley is a compatible replacement part for Chicago Die Cast 175A.
  • Through Bore : 1.17" , Groove Angle : 34° , Inside Diameter: 3/4" , Outside Diameter : 1-3/4" , Width : .608".
Check Stock

Fielect Aluminium Alloy XL 20 Teeth 8mm Inner Bore Diameter Timing Belt Pulley Flange Synchronous Wheel Silver Tone for 3D Printer CNC 1Pcs

  • V belt drive pulley is a compatible replacement part for Chicago Die Cast 600A.
  • Through Bore : 1.31" , Groove Angle : 34° , Inside Diameter: 1/2" , Outside Diameter : 6" , Width : .688".
Check Stock

TB Woods AK94 FHP QT Bushed V-Belt Sheave, A Belt Section, 1 Groove, QT Bushing required, Cast Iron, 9.25\ OD, 2710 max rpm

  • V belt drive pulley is a compatible replacement part for Chicago Die Cast 350A.
  • Through Bore : 1.25" , Groove Angle : 34° , Inside Diameter: 5/8" , Outside Diameter : 3.5" , Width : .716".
Check Stock