ReviewsDie cut Kapton

Lanzar MAXP154D MaxPro Series Small 4Ω Dual Subwoofer (15', 2,000 Watts)

  • 1000 WATT POWER: This car subwoofer has 1000 Watt peak power that will produce high sound resonance. It also has 65 + 65 oz. heavy double stacked magnet structure, golden input terminals and dual 4 Ohm impedance.
  • WIDE RUBBER SUSPENSION: Made with this non-fatiguing rubber suspension to keep equipment safe. Designed with bumped and vented motor structure for durability and easy installation. The overall diameter is 12.09".
  • NON-PRESSED PAPER CONE: It is a clean-cut car subwoofer that boasts a black non-pressed paper cone. It will enhance car stereo by producing a powerful audio and keep equipment safe at the same time.
  • KAPTON VOICE COIL: The speaker subwoofer comes with a 2” dual layer high-temperature Kapton voice coil to resist corrosion. It has a stamped steel basket as well, with a sensitivity of 90.0dB and a special designed rubber magnet boot.
  • 6.42” MOUNTING DEPTH: Easy to install with its 6.42” mounting depth and fits most audio system for cars, boats or RVs. Included are the necessary cables, installation template and manual.
Check Stock

Cuttlebug Cutting Plate B 6'X13'-

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting..
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock

3 Car Audio Speaker Tweeter - 1000 Watt High Power 3 Inch Super Titanium Tweeter System w/ Die Cast Aluminum Frame, 1.5k - 25 kHz Frequency, 112 dB, 4-8 Ohm, Heavy Duty 150 oz Magnet - Pyramid TW67

  • 1.5'' High-Temperature Kapton Voice Coil.
Check Stock

We-buys Cutting Dies C Plate Replacement Adapter Mat Clear 5.9'×7.6'

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting.Plate thickness is 3mm.
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock

(2) Pairs MB QUART FSB216 6.5' 280 Watt Car Audio Component Speakers

  • ...ossover Slope: 12 dB. Tweeter Dome Material: Aluminum dome tweeters deliver great sound with increased reliability.
  • Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact. Voice Coil: Pure Copper voice coil creates a strong magnetic field with a very thin extrusion. Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat. Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process. Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response.
  • Surround/Cone Coupling: The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather. Gasket: A textured ABS gasket assures a rigid linear seal to the mounting surface. Tinsel Leads: Highly conductive while remaining flexible during high power applications. Cooling System: Over-coil cooling system allows air exchange over the voice coil through the spider.
  • External Component Crossover: External Passive Butterworth crossover for a smooth transition of frequencies from midrange/midbass to the tweeter element designed into a compact crossover housing that can be easily hidden in....
Check Stock

Car Vehicle Subwoofer Audio Speaker - 8 Inch Blue Injection Molded Cone, Blue Chrome-Plated Steel Basket, Dual Voice Coil 4 Ohm Impedance, 600 Watt Power, for Vehicle Stereo Sound System - Pyle PLBW84

  • ...ill maximize sound quality while minimizing noise and distortion.
  • 60 OZ MAGNET STRUCTURE: Built with 60 oz. magnet and a rubber magnet boot that will enhance car stereo or radio by producing powerful audio and unmatched performance. It comes with a sensitivity or SPL of 83.5dB to resonate perfect clarity.
  • 1.5” DUAL KAPTON VOICE COIL: The speaker subwoofer comes with a 4 Ohm impedance per coil that can be wired as 4 or 8 Ohm. The 1.5” high-temperature dual Kapton voice coil resists corrosion. Works in any time of enclosure - sealed, vented, or open-air.
  • CHROME-PLATED PLASTIC BASKET: Features bumped vented extended pole piece and designed with a non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a blue injection-molded cone & blue chrome-plated plastic basket.
  • 4.28” MOUNTING DEPTH: Easy to install w/ 4.28" mounting depth & 8.8" overall diameter, fits most audio system for cars, boats or RVs. The flat progressive spider design improves the speaker's mechanical stability, increasing the life of the speaker.
  • Blue Injection Molded Cone - Flat Progressive Spider - 600 Watt Max Power Handling - Mounting Depth: 4.28''.
  • Non-Fatiguing Big Rubber Suspension - New Wave-Like Rubber Gasket - Impedance:4 Ohm (Per Coil).
Check Stock

Car Vehicle Subwoofer Audio Speaker - 12 Inch Blue Injection Molded Cone, Blue Chrome-Plated Steel Basket, Dual Voice Coil 4 Ohm Impedance, 1200W Power, for Vehicle Stereo Sound System - Pyle PL1290BL

  • ... will maximize sound quality while minimizing noise and distortion.
  • 90 OZ MAGNET STRUCTURE: Built with 90 oz. magnet and a rubber magnet boot that will enhance car stereo or radio by producing powerful audio and unmatched performance. It comes with a sensitivity or SPL of 85dB to resonate perfect clarity.
  • 2.5” DUAL KAPTON VOICE COIL: The speaker subwoofer comes with a 4 Ohm impedance per coil that can be wired as 4 or 8 Ohm. The 2.5” high-temperature dual Kapton voice coil resists corrosion. Works in any time of enclosure - sealed, vented, or open-air.
  • CHROME-PLATED STEEL BASKET: Features bumped vented extended pole piece and designed with a non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a blue injection-molded cone & blue chrome-plated steel basket.
  • 7.12” MOUNTING DEPTH: Easy to install w/ 7.12" mounting depth & 12.20" overall diameter, fits most audio system for cars, boats or RVs. The flat progressive spider design improves the speaker's mechanical stability, increasing the life of the speaker.
  • Powerful vehicle subwoofer with 12-inch injection-molded cone woofer.
  • 2.5-inch high-temperature dual Kapton voice coil and flat progressive spider.
  • Specially treated rubber edge suspension with rubber magnet boot....
Check Stock

Anna Griffin AG-523H Fancy Flip Card Kit Die Single

  • 20 cards 20 die cut shapes 10 card stock sheets 48 interior sentiment stickers 24 Exterior sentiment stickers 24 Exterior sentiment die cuts.
  • Also includes 72 flower die cuts 48 foil stamped corners 30 foil die cuts 1 mat 1 set of dies 150 foam adhesives 30 envelopes perfect for any crafter.
Check Stock

Accuquilt GO! Strip Cutter

  • DESIGN WITH EASE: Say goodbye to cutting difficult shapes by hand and have your cut-out designs in a jiffy.
  • CUT QUALITY SHAPES: Place quality fabric either fully or partially on the die shape and watch designs come to life.
  • CUTS EASILY: The fabric die comes with lines at multiple angles to give you creativity liberty and flexibility in your projects.
  • UNLIMITED DESIGNS: Create beautiful designs with the precise cut out shapes from the square die.
  • SAFE TO USE: Cut out your shapes with ease and keep your hands safe with this die.
Check Stock

Sizzix Big Shot Foldaway Machine Only (Black) Inspired by Tim Holtz, Cutting and Embossing Machine, 665305

  • VERSATILE DIE CUTTING MACHINE – The Sizzix big Shot foldaway die-cutting machine features a cutting surface and handle that neatly fold away. Perfect for easy storage and creating on the go. This die-cutting and embossing machine is the perfect tool for a range of creative pursuits for everyone from the beginners to experts. Built in storage compartments keep your wafer-thin dies and favourites tools close to hand..
  • DIE CUTTING AND EMBOSSING –Perfect for paper craft, scrapbooking, home sewn projects, upcycling, card making and more..
  • MULTITUDE OF MATERIALS – Die-cuts and embosses many different materials up to 6 (15. 24 cm) wide. Compatible with the entire Sizzix product library including Big, Thinlits and Framelits dies and Textured Impressions, Texture Fades and Impresslits Embossing Folders (with the exception of Big Plus and Big Pro dies)..
  • INCLUDED COMPONENTS – Contents include 1 big Shot foldaway machine, 1 Platform, 1 thin die adapter, 1 pair of standard cutting pads, 1 instruction booklet..
  • MACHINE SIZE – 34.93cm x 33.02cm x 20.32cm.
Check Stock

CraftFIRST 9x12.5 Clear Cutting Plate 2PK for Gemini Die Cutting and Embossing Machine Logia A4 Die Cutting Machine

  • COMPATIBILITY- Compatible with Gemini Die Cutting & Embossing Machine Logia A4 Die Cutting Machine.
  • DIE CUTTING - Protects your dies and materials when passing through the die cutting machine.
  • DURABLE- Made of high quality Polycarbonate plastic, more durable than acrylic plates.
  • TRANSPARENT – The see-through PC plastic allows easy placement of materials for a precise die cut.
  • PRODUCT DIMENSIONS 9" x 12.5", contains two plates.
Check Stock