ReviewsDiesel Exhaust Clamp

Roadformer 5 inch Exhaust Clamp - Lap Joint Exhaust Band Clamps Preformed Stainless Steel (2 Pack)

  • 5" exhaust clamp is to joint 5" OD overlapping into 5" ID. Stainless Steel Band in the width of 3 inch/76 mm, using 12.9 degree high-strength fasteners.
  • Lap joint exhaust clamp is fast, easy and accurate installation, and minimize noise and exhaust gas leak, protect exhaust ends from damaged when fastening.
  • The stepped band stainless steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Exhaust clamp will come with plastic sticker to protect the band.
  • you can use with it or you can remove the protection sticker off before using.
Check Stock

Graco 24G636 Diesel Exhaust Fluid (DEF) Manual Hand Pump

  • Provides a simple, cost-effective solution to dispensing diesel exhaust fluid.
  • Pump can be installed in any orientation - 360 degrees.
  • Includes a pump locking ring to fully secure the pump to the drum.
  • Comes with hand pump, dispense hose, and suction tube.
  • For dispensing diesel exhaust fluid only.
Check Stock

Roadformer 2.5" Lap Joint Exhaust Band Clamp Preformed Aluminized Steel

  • Roadformer 2.5" exhaust clamp is to joint 2.5" OD pipe overlapping into 2.5" ID pipe. It is fast, easy and accurate installation, also minimize noise and exhaust gas leak. The lap joint Clamp is widely used in exhaust system of Automotive, Commercial Vehicle and off high way industry..
  • This stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Roadformer is dedicated in providing real value to our customers and end users. We set industry quality standard.
Check Stock

SYKRSS 3 Stainless Steel Butt Joint Narrow Band Exhaust Seal Clamp with 1 Block

  • Application: Seal exhaust clamp is the muffler repair parts, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold,....
  • Universal fitment, Joins 3.0" OD pipe to 3.0" ID pipe, There are 5 sizes for choose, it can meet your various needs. Please measure the size of your....
  • The narrow band clamp add the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. The I-shape block again enhances....
  • Easy to remove and install, the exhaust band seal clamp chose the design of flexible bolt and nut structure. can easily disassemble and install them.....
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 3.0" narrow band clamp, you can feel free to contact us via....
Check Stock

Roadformer 3' Butt Joint Exhaust Band Clamp - Aluminized Steel for 3' OD Exhaust Pipe, Muffler, Elbow and Exhaust Tubing Connection

  • PREMIUM QUALITY STANDARD – 3" butt joint exhaust clamp is made in high quality standard. This band clamp is used for 3" OD exhaust ends connection.
  • REAL SEALING CAPABILITY – Roadformer 3" exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, Pre-attached hardware provides fast, easy and accurate installation.
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

SEUNMUK 4 Pack 2.5 Inches Exhaust Clamp Sleeve, Stainless Steel Butt Joint Band Clamp Exhaust Coupler Exhaust Band Clamp Sleeve for 2.5-Inch OD Exhaust Pipes, Mufflers

  • ROBUST CONSTRUCTION - The stainless steel exhaust clamp is high-quality 304 stainless steel material, well polished with smooth mirror finish and high strength, which is solid and durable to last and can be reused for a long time..
  • EASY TO JOINT - No welding design, the joint exhaust band clamp features a practical components including bolts, nuts and I-block, you can easily mount or disassemble them, and you can also wrap some exhaust heat tape to enhance complete sealing..
  • TIGHT SEALING - Uniform distribution of clamping force will not crush the pipeline, which can provide tight seal and keep off exhaust and noise leakage. The exhaust band clamp sleeve can close fit on the exhaust pipes or mufflers..
  • PRACTICAL AND MULTIPURPOSE - 4 packs of joint exhaust muffler clamps is designed with 2.5-inch diameter and 3 inches length, which fits for exhaust pipes or mufflers, manifolds, catalytic converters of that with an outer diameter of 2.5 inches..
  • SATISFACTORY SHOPPING EXPERIENCE - If you have any dissatisfaction with exhaust clamp 2.5 inch, you will get a full refund within 30 days. If you have any questions about the product, please feel free to contact us, we will provide you with a satisfactory solution..
Check Stock

DPF Remedy Easy to Use Tablets Immediately Reduces DPF Regeneration Cycles for Diesel RVs, Semi-Trucks, Pickups, Boats. (6-Pack. 50-Gal. Tablets)

  • Easy to Store. Pack of 6 tablets. Treats 300 gal..
  • EXTENDS DPF (DIESEL PARTICULATE FILTER) REGENERATION INTERVALS UP TO 800%.
  • See immediate results on first tank of fuel..
  • Reduces DEF (Diesel Exhaust Fluid) consumption.
  • Increases performance-horsepower 3 to 5%..
  • Continuously cleans fuel system and injectors..
  • SAFE FOR ALL ENGINES - Diesel or Gasoline.
Check Stock

EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel

  • Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock

PEAK Blue 32 Ounce Agri-Clean Liquid Fuel Stabilizer Additive for Diesel Engines

  • With 32 ounces of this clean liquid additive, you can enhance the performance of 100 gallons of diesel fuel while cleaning and protecting critical....
  • Specially designed for agricultural and off-road vehicles by ensuring diesel fuel freshness and stability while reducing exhaust emissions.
  • Optimizes fuel economy by up to 8-percent while restoring injector performance.
  • Boosts cetane up to 5 numbers for faster starts and a smoother running engine.
  • Compatible with all diesel fuels, especially in ultra-low sulfur diesel, renewable diesel, and biodiesel blends.
Check Stock

Roadformer 3 Lap Joint Exhaust Band Clamp Preformed Aluminized Steel

  • Roadformer 3" exhaust clamp is to joint 3" OD pipe overlapping into 3" ID pipe. It is fast, easy and accurate installation, also minimize noise and....
  • This stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust....
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100....
  • Roadformer is dedicated in providing real value to our customers and end users. We set industry quality standard.
Check Stock