ReviewsDiesel Fuel Rail Pressure Gauge

Power Service 3026-12 Diesel Kleen and Cetane Boost 26 oz, Pack of 12, Gray

  • Cleans dirty injectors and prevents injector sticking in both High Pressure Common Rail (HPCR) and older systems, effective in all diesel fuels, including ULSD, biodiesel and biodiesel blends.
  • Removes both internal and external deposits on fuel injectors.
  • Boosts cetane up to 6 numbers – engines run smoother with less power lag and faster cold starts.
  • Boosts power – reduces need for downshifting.
  • Contains Slickdiesel Lubricator to protect fuel pumps and injectors from increased wear caused by poor quality Ultra Low Sulfur Diesel (ULSD) fuel.
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

Fuel Pressure Gauge Kit，0-140 PSI Fuel Pump Tester，Fuel Injection Pressure Tester Updated TU-114 Fuel Pressure Tester Kit Gas Oil Pressure Tools Gasoline Tester Tool

  • 【ACCURATE READING】 Measuring range: 0-140psi (0-10 bar),2.5" gauge.Easy to read dual scale gauge, gasoline presure tester Can provide accurate readings and check whether there is sufficient fuel flow.The Fuel pressure tester can quickly indicate if fuel pump is defective or inconsistent in pressure flow..
  • 【HIGH-QUALITY MATERIALS AND EASY TO CARRY】 The fuel pressure gauge uses metal gauge head with shockproof rubber cover.The material of the fuel pressure tester kit consists of Copper, Rubber, ABS Plastic, Iron, and Aluminum. Anti-corrosion materials to ensure long lasting using life.Nylon resin hose is resistant to fuel, wear and corrosion.Durable plastic blow-molded case to protect components and provide easy transport and organization，Items are protected well in a sturdy case..
  • 【REGULAR CHECK FUEL INJECTOR PUMP PRESSURE】 High or low fuel pressure can cause many engine problems.It is mainly used to test whether the fuel supply and injection system are working normally, and to determine whether the internal components are damaged or the oil circuit is faulty. You can troubleshoot possible problems based on the vehicle manufacturer's user manual..
  • 【AFTER-SALES SERVICE】Package Included: 1x Fuel Injection Pressure Tester, As Picture Show....
Check Stock

Actron CP7818 Fuel Pressure Tester Kit,Black

  • Actron's Fuel Pressure Tester Kit works on most domestic fuel injected vehicles having a Schrader valve test port on the fuel rail.
  • Use on the following: Ford high pressure central fuel injection and GM, Ford, and Chrysler multi-port fuel injection - multi-port means one fuel injector per cylinder.
  • Tests: fuel pump check valves (leak down test), fuel pressure regulators, weak fuel pumps, fuel line integrity (clogged or damaged fuel filters), leaking injectors.
  • Kit includes: large easy-to-read 2-1/2 inch gauge with standard (0-100 psi) and metric (0-700kPa) scales, Ford fuel line adapter, solid brass fittings, & pressure relief valve for safe, clean testing.
Check Stock

kweiny Diesel Common Rail 14mm Fuel Injector Cap Block Off Tool

  • Main Usage: Identification of faulty diesel fuel injectors and diagnosis of engine cylinder knocking sounds.
  • Compatibility: Fit with 2001-2005 6.6L Chevy/GMC Duramax and for Dodge/Cummins 2003-2007 5.9L, for Bosch diesel common rail system, and other vehicles with a 14mm fuel line nut.
  • Working principle: Block the fuel supply to the detected cylinder, and sealed diesel common rail pipe. Make the detected cylinder temporarily stop working.
  • Specification: M14x1.5mm internal thread nut.
  • Material: Carbon tool steel, surface antirust..
Check Stock

OTC 3674 Diesel Fuel Pressure Tester

  • OTC's Diesel Fuel Pressure Tester features simple one wire connectivity to the fuel pressure sensor signal wire.
  • Designed for diesel engines that have a fuel pressure sensor reading used by vehicle computer.
  • readings alternate between current and maximum pressure.
  • Molded plastic storage case keeps the tool protected when not in use.
Check Stock

kmdiesel 3963808 Fuel Injector Common Rail Fuel Plug Pressure Relief Valve 1110010007 1110010020 replace fits 2003-2007 Ram 2500 3500 5.9L Cummins

  • Replace OE number : 3963808, 3947799, 1110010007,1110010020 Fitment 2003-2007 ,1110010020 Ram 2500 3500 and 5.9L Cummins diesel engine.
  • Material:Made of Stainless Steel to avoid cracking and excessive heat.Effective anti-oxidation,anti-rust,anti-corrosion..
  • Usage:Replace the factory banjo bolt mounted on the top side of the pressure relief valve..
  • Features: Maintain fuel rail pressure during high engine load conditions.Prevent high-pressure fuel from being returned to the fuel tank.Eliminate....
Check Stock

TU-32-20 - 0 to 300 psi Compuchek Fuel System Pressure Tester Gauge

  • GREAT FITMENT ->> Fits Compucheck test ports on the fuel system of Cummins diesel engines as well as other diesel engines that have been outfitted....
  • FUNCTION->> Used to check fuel system pressure on diesel engines with Compucheck test ports, six-foot hose allows for road testing..
  • DURABLE ->> The hose assembly is made from synthetic rubber, finally constructed with red coat finish, showing good performance and lasting service....
  • KIT INCLUDED ->> Consists of a hose assembly with a female Compuchek fitting on one end and a 3-1/2", 300 PSI gauge on the other..
  • GUARANTEE ->> If you're not 100% satisfied with our product.Simply return it for a full refund in 30 days, no questions asked money back guarantee.....
Check Stock

OTC 4200 Nozlrater Diesel Fuel Injector Nozzle Tester

  • Ultimate tool for diagnosing a number of problems that affect diesel fuel injector nozzles.
  • Enables technicians to check for leakage, pop-off pressure, spray pattern, and chatter.
  • This tool will accommodate a wide range of injectors.
  • Features a rugged, lightweight reservoir that holds 7/10 of a gallon of fuel.
  • Equipped with a replaceable 2-micron filter.
  • large, dual-scale, high-pressure gauge is protected by a guard and includes an indicator needle to record....
Check Stock

Ultrasonic Fuel Injector Cleaner Machine & Fuel Tester 4 Cylinders 110V, CATUDIY Fuel Injector Cleaner Tool for Diesel Fuel System Cleaner Diagnostic Tester for Motorcycle Automotive Gasoline Test Kit

  • 【Ultrasonic Cleaner & Simulating Testing】The injector cleaner machine is a mechatronics automotive tool that combines ultrasonic cleaning technology and microcomputer oil pressure closed-loop control cleaning & detection technology. To simulate various realistic operating conditions of the engine, This fuel tester cleans and detects the fuel injectors of various automobiles and motorcycles.
  • 【Heated & Reusable & Effective】The fuel injector tester improves a lot of cleaning effect by heating reusable and recyclable cleaning fluid, which is money saving and eco-friendly. With 1.3L large capacity ultra cleaning tank, to perform ultrasonic cleaning on single / multiple injectors simultaneously, the auto cleaner can eliminate thoroughly blockages on the injector accessories and internal parts.
  • 【Portable & Humanized Design】The mini ultrasonic cleaner only weighs 8kg, easy to carry. Equipped with LED display, pressure gauge, glass tubes, testing liquid level gauge and multifunctional control panel, the injector pulse tester allows easy operation through its clear menu, and real-time monitoring of fuel injector detection and fuel dynamic value....
Check Stock

6.0 Injector Pressure Regulator IPR Valve Socket & Air Test Fitting Tool Kit & Fuel Rail Adapters for 2003-2010 Ford 6.0L for Powerstroke E-350/ E-450, Excursion, F-250/F-350/F-450/F-550

  • Fitment -- Fit for 2003 - 2010 Ford Super Duty F250 F350 F450 F550.
  • 2003-2010 Ford Excursion, 2004-2010 Ford E-350 E-450 with 6.0L V8 diesel turbocharged engines..
  • IPR Valve Socket -- Replace the worn out injector pressure regulator (IPR) valve, designed to remove/replace your injector pressure regulator (IPR) effectively and quickly!.
  • IPR Valve Air Test Fitting Tool -- Used to quickly verify that an engine has no high pressure oil leaks before installing the engine into the vehicle where repairs are much more difficult..
  • Fuel Rail Adapters -- High Quality CNC Machined from Billet Brass, allows observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitates testing of the High Pressure Oil System for leaks using shop air..
  • 100% Satisfaction Guarantee -- If you're not 100% satisfied with our Kits, simply return it for a full refund in 30 days, Premium Support & 12 Months Warranty..
Check Stock