ReviewsDifferential Axle

00295-01281

Sets to form an elastic body which is not affected by vibration or impact.
Maintains a stable rubber body over an operating temperature range of -76°F to 482°F.
Highly resistant to engine oil, various chemicals and coolant.
Can be used on the transmission cover, clutch housing, differential cover and carrier, extension housing, front bearing, ring retainer and rear axle shaft connection.

Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version. ARM9 main control chip,FPGA core algorithm chip. 16 opto isolated digital inputs,3 opto isolated digital outputs..
3 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle. Analog spindle control 0-10V spindle control (can be modified as PWM output). Jog function for each axle (continuous, step, defined distance). 24VDC power input, minimum Current is 0.5A..
5 inches TFT screen, resolution ratio: 480x272,17 operation keys. USB flash disk support for G code file input,no size limited of the G-code file. 1GB internal memory and support standard MPG..
Support the operation of quickly specify the running position and ''Power Cut'' recovery. Data is automatically saved. Support the origin and Limit share the same Input ports.The controller only support NPN type limited switch..
Drive output type, strong anti-interference ability, long-distance transmission. Applications: CNC machine tools, printing machinery and other zero correction and signal segmentation..

Fits 2009 -2016 Ranger. RZR 800, RZR 800 S & the RZR 800 4.
Rear Differential Gear Case/ Axle Seal is an exact cross and replaces the Polaris OEM P/N 3610146, 026HH115, 3610117, 3610159.

16 opto isolated digital inputs,3 opto isolated digital outputs. Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version.
Analog spindle control 0-10V spindle control (can be modified as PWM output). 4 axle motor control differential Pulse and direction output signal,maximum.500Khz per axle.
ARM9 main control chip,FPGA core algorithm chip. 5 inches TFT screen, resolution ratio: 480x272,17 operation keys.
Applications: CNC machine tools, printing machinery and other 0 correction and signal segmentation.
After-sale Service. We are confident in our products and stand behind them 100%. Just reach to us with any questions or concerns and we will be happy to help in less than 24 hours!.

16 opto isolated digital inputs,3 opto isolated digital outputs.Analog spindle control 0-10V spindle control (can be modified as PWM output).Drive output type, strong anti-interference ability, long-distance transmission..
Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version.5 inches TFT screen, resolution ratio: 480x272,17 operation keys..
4 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle.24VDC power input, minimum current is 0.5A. Support the origin and Limit share the same Input ports.The controller only support NPN type limited switch..
ARM9 main control chip,FPGA core algorithm chip.1GB internal memory and support standard MPG.Jog function for each axle (continuous, step, defined distance)..
USB flash disk support for G code file input,no size limited of the G-code file.Support the operation of quickly specify the running position and ''Power Cut'' recovery. Data is automatically saved.Applications: CNC machine tools, printing machinery and other 0 correction and signal segmentation..

Type 540 Motor included (Compatible with kit-included motor or Item 53689 540J Motor only).
Front Suspension: Double Trailing Arm, Rear Suspension: Swing Axle.

Fully milled gearbox housing made of 6061-T6 aluminum for the rear axle of ATOPRC.
Due to its dimensional stability results in a higher load capacity and service life of bevel gear and ball bearings. The problem of the torn fastening thread has an end with this case.
The bearing adapters are included in the set.
We recommend gluing the bearings with threadlocker y0113. For mounting the bearing adapters in the housing we recommend Bindulin silicone y19015. To use HD differential shafts y1477, the Atoprc bearing adapters must be machined.

Upgrade - Our system will help to prevent you from getting caught up on rocks. Multiple drain holes are in several locations to release any water or mud that might collect in the skid plate.
Strength - Protects all aspects of your Bronco’s Rear Differential like Gasket Seal, & Pinion. In addition to protecting the full length of your Rear Axle & Upper Link Mounts.
Install - Utilizing the provided hardware, install is a smooth process and can be completed with 1-2 people. It takes approximately 1 hour to install. The install guide can be downloaded below!.
Fitment - This was engineered to work with the original factory diff covers. This may not fit with aftermarket diff covers.
Compatibility - DV8's Rear Differential Skid Plate is compatible with 2021 & 2022 Ford Bronco 6th Gen. Our skid plate fits all 2-door & 4-door Broncos.

Brand New Premium Quality Front Axle 4-Wheel Drive Actuator.
Direct Fit For Models Manufactured After January 1996.
Can Be Used With APDTY 711711 Wiring Harness As Upgrade On 1988-1996 Models With The Older Style Thermal-Gas Type Actuator.