ReviewsDifferential Fluid

Royal Purple 01300 Max-Gear Synthetic Gear Lube Oil 75W90 Case of 12 Quarts

  • Recommended for use in truck & automotive front or rear differentials/manual transmissions/lower gear units of marine engines that specify use of an API GL-5 or GL-4 fluid. // Formulated for limited slip differential use..
  • Maximizes horsepower. // Extends gear & bearing life..
  • Reduces operating temperature. // Lower co-efficient of friction..
  • Superior corrosion protection. // Separates rapidly from water..
  • Max Gear makes gears run smoother/quieter/cooler/longer without overhauls..
Check Stock

Oil Transfer Pump Extractor, Electric Oil Pump Fast Oil Change Transmission Fluid Extractor Pump, 12v 60w Diesel Fluid Scavenge Suction Pump for Changing Oil, Boat, Tubes, Truck, RV, ATV, Riding Mower

  • ...Change. Helps bleed diesel engines after filter change essential tool. Suck up to pump, good to go! Just get the motor warm. Turn it off and turn on the oil pump extractor. Its that easy. It drains to the last drop. Makes your oil changes that much quicker and cleaner. Worked great to suck out old brake fluid, differential fluid, gear oil, transmitting fluid..
  • POWERFUL SUCTION OIL FUNCTION- This high efficient battery powered oil extractor pump is easy to pump various fluids and oils. Easy to put together, all the hoses came with it. You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery, ran the small hose down the dipstick tube and turned it on, and press the button. Simple On/Off Power Switch, easy to use. Great for a quick oil change..
  • DIFFICULT OIL EXTRACTION NO MORE - The 12v Oil Change pump extractor are very easy to use and makes a top down oil change so easy. Ideal diesel fluid oil transfer pump extraction equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore..
Check Stock

Taidacent THS4131 Fully Differential Input/Output Low Noise Amplifier Module Single Ended to Differential Single Ended Input Double Ended Output

  • Name: THS4131 Fully Differential Amplifier Size: 45mm X 34mm Supply Voltage Range: 5V Single Supply ±15V Dual Supply.
  • This module can implement single-ended to differential, single-ended input, and double-ended output. Has high performance, low noise, wide power supply voltage range and other advantages..
  • The THS413x consists of a true fully differential signal path from input to output. This design produced excellent common-mode noise suppression wells that improved total harmonic distortion..
  • Chip features High performance 150 MHz - 3 dB bandwidth (VCC = ±15V) 51V/us slew rate -100dB third harmonic distortion (250kHz) 2. Low noise 1.3 nV/vHz Input Reference Noise Differential input/cent output Balanced Output Suppresses Common Mode Noise Reduce second harmonic distortion from dry differential output.
  • Wide supply voltage range VCC-5 V Single Supply to ±15V Dual Supply ICC (SD) = 860 u A Shutdown Mode (THS4130) Chip application Single-ended to differential conversion Differential ADC Driver Differential antialiasing Differential transmitters and receivers Output Level Translator.
Check Stock

DuraChoice 2\ Oil Filled Vacuum Pressure Gauge - Stainless Steel Case, Brass, 1/4\ NPT, Lower Mount Connection, 30HG/60PSI

  • Pressure switch with 30-50 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached.
  • Switch works with a 1. 5 hp or less pump, has an adjustable differential range of 15-30 psi, and has a cut-out range of 20-65 psi.
  • NEMA 1 enclosure has a 1/4" NPSF internal fluid connection.
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ...l kit includes 3PCS 1M dipstick tubes, can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess. Also can insert into any insertable pipe or tank to change non-corrosive and low-consistency liquids (such as differential fluid, transfer case fluid, gear oil, power steering fluid, coolant, water) in vehicle, jet ski, lawn mower or other small engine.
  • This ATF engine oil refill tool set provides 15PCS ATF adapters to fit a variety of vehicle models, add oil from fill plug or help to push transmission fluid into the engine through the drain plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to ac....
Check Stock

Taidacent AD8130 Differential Receiver Amplifier Module Differential to Single-ended High Common-mode Rejection Ratio Low Noise Low Distortion

  • Name: AD8130 Differential Amplifier Size: 43mm X 38mm Supply voltage range: ±5V~±12V.
  • The differential-to-single-ended amplifier, which has a 270-MHz bandwidth and a very high common-mode rejection ratio (CMRR) at high frequencies, can also be effectively used as a high-speed instrumentation amplifier or to convert a differential signal to a single-ended signal..
  • Differential amplifiers can process single-ended inputs as interactive differential outputs or treat differential inputs as differential outputs. These amplifiers have two independent feedback loops that control the differential and common-film output voltages, respectively..
  • Chip features 1. High speed AD8130: 270 MHz, 1090 V/us (G= +1) AD8129: 200 MHz, 1060 V/us (G= +10) 2. High Common Mode Rejection Ratio (CMRR) 94 dB (minimum, DCE100 kHz) 80 dB (minimum, 2 MHz) 70 dB (10 MHz) 3. High input impedance: 1 MQ differential 4. Low noise AD8130: 12.5 nV/Hz AD8129: 4.5 nV/vHz.
  • 5. Input common mode range: ±10.5V 6 low distortion, 1V peak-to-peak (5 MHz): AD8130, -79 dBc (Worst Harmonic, 5 MHz AD8129, -74 dBc (Worst Harmonic, 5 MHz) 7. User adjustable gain G= +1 without external components 8. Supply Voltage Range: +4.5V to ±12.6V 9. Power saving mode.
Check Stock

3M Factory-Match Seam Sealer, 08323, Black Color, Two-Part, Medium/High Viscosity Urethane, 200 mL/6.75 fl oz Cartridge

  • Sensor-safe, non-corrosive formula designed for superior adhesion to oily surfaces and long term durability.
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants.
  • Temperature Range -65°F to 500°F (-54°C to 260°C) intermittent.
  • Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, and differential covers.
Check Stock

LUMAX Black LX-1300 Lever Bucket 5 Gallon Pails. Smooth, Easy Pumping Action dispenses All Types of Lubricants, Even in The Coldest Weather

  • Portable - clamps to any 25-50 pounds/ 5 gallon pail.
  • All steel pump has 1-1/2 inches inlet and 1/2 inches outlet port.
  • Zinc plated corrosion-resistant suction tube.
  • Self-priming delivers 1 quart per 12 strokes.
  • 5 feet oil resistant flex hose with curved nouncezleDescriptionThe lever-action bucket pump uses smooth, easy pumping action and dispenses all types of lubricants, even in the coldest weather. It is ideal for transferring motor oil, transmission fluid, differential fluid, heavier oils and other automotive additives. Rust resistant ribbed cover assembly firmly clamps to any 25-50 pounds / 5 gallon pail using adjusting screws to accommodate variations in drum diameter. This all steel pump has an 18 inches x 1-1/2 inches zinc plated, corrosion-resistant suction tube with a 1-1/2 inches inlet and a 1/2 inches outlet port and a 5 feet oil resistant flex hose with curved nozzle. The head of the pump is made of heavy-duty, lucast, cast-alloy material which is heavier and has a reinforced wall thickness for extra strength and durability. This pump is self-priming , delivers 1 quart per 12 strokes, and has a pump lever with an oil resistant, contoured grip for comfort and safety..
Check Stock

AISIN CKT-063 Clutch Kit

  • Designed for efficient, consistent performance and manufactured using only the highest quality materials.
  • With superior OE technology and know-how, Aisin ensures that every differential lock actuator provides perfect OE form, fit, and function.
  • Differential lock actuator engages locking function, changing differential from open to locked configuration.
  • Unit mounts directly to the differential.
Check Stock

Traxxas 5137 Differential Oil, 50,000 Weight

  • Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential.
  • Altering the limited slip capability can enhance turning performance for faster exit speeds.
  • Higher weights result in more differential locking action.
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check Stock

Traxxas 5136 Differential Oil, 30, 000 Weight

  • Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential.
  • Altering the limited slip capability can enhance turning performance for faster exit speeds.
  • Higher weights result in more differential locking action.
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check Stock