ReviewsDigital Current

Honeywell TH3210D1004 Non-Programmable Digital Thermostat

  • Thermostat non-programmable digital 2H/1C Pro 3000.
  • Backlit digital display – both current and set temperatures are easy to read in various lighting conditions.
  • Shows both current and set temperatures at the same time.
  • Precise comfort control [± 1 F (± 0.5 C)] – maintains consistent comfort to the highest level of accuracy.
  • Basic operation – easy-to-use slide switches allow you to select the heat or cool mode, and operate the fan.
Check Stock

SMKAN DP20V2A Constant Voltage Constant Current Programmable Control Step-down Supply Power Module

  • The constant voltage and constant current programmable control power supply module is cabinet and delicate, and it put the collection of analog integration and digital control functions in one. Its adjustable output voltage range is 0-20.0V, step by 0.1V. Its adjustable output current range is 0-2.00A, step by 0.01A. Boot voltages can be stored freely and the model has two groups of quick storage voltage. Compared with the traditional analog power supply, it is more convenient to quickly extract the voltage or current required. LCD display on the model has the function digital voltmeter and ammeter. You can view the preset voltage, input voltage, output voltage, the preset current, output current, output power and LCD brightness..
  • Adjusting preset voltage:Pressing SET button, page down to U-SET, press the codding potentiometer, then enter toadjustnumeric value. Press codding potentiometer in turn to choose the numeric value you want to adjust. Turn codding potentiometer to adjust the numeric value. If you want toexit adjusting voltage, press shortly SET. In the process of adjusting preset voltage, if you open output voltage mode by pressing the ON/OFF, the output voltage will be refreshing by increasing or decreasing the numeric value.
Check Stock

sooloon OBD2 Car Memory Saver Protection Connector OBD II Automotive Battery Computer ECU Power Off Vehicle Battery Detection Tool Kit 12V SAE Quick Release Adapter Supply Cable with 5A Fuse, S211110

  • The dual digital display battery change tool uses environmentally friendly ABS high-quality materials, no peculiar smell, high-strength high-quality copper wire, silicone flame-retardant cable, the cable length is 1 meter/3.3 feet (approximately), its flexibility is not easy to burn, and the insulation is good Tangled, environmentally friendly and durable. After testing, the output and input power are normal to ensure that the product is qualified..
  • The dual digital display battery change tool can retain the dashboard information, audio, storage seat, digital clock, etc. of the car computer. It will not change the speaker and the anti-theft device will not be jammed and will not display a fault code. Retaining the vehicle code and electronic presets can prevent information loss when the on-board computer is powered off. Save time and high efficiency, it is a good helper to replace car battery..
  • This device can be used with any 12V DC power supply, including trip starter, DC 12V lead-acid battery or other car DC 12V power socket. The power management system with core processor, the voltage and current are displayed at the time, the red displays the voltage, and the green displays the current. Using this simple memory saving device when replacing the car....
Check Stock

GHB 20A 12V 24V Solar Charge Controller Auto Switch LCD Solar Panel Battery Regulator Charge Controller Overload Protection Temperature Compensation

  • LCD Screen Display: This solar panel charger controller with LCD digital screen which is with energy-saving backlight to display all parameters,....
  • Fully Automatic: This solar panel regulator with output switch, easy to operate. The battery indicator light on the controller will be on if....
  • Power-efficient: Microcontroller digital accuracy, when solar panel regulator is charging, the arrow between the panel icon and the battery icon will....
  • DC Output Voltage: 12V-24V, DC Output Current: 20A. To connect your....
  • Protection Functions: Overload and Short circuit protection, Lightning protection, Under-voltage protection, Over-charging protection, Reverse....
Check Stock

ACEIRMC 2pcs 0.28' LED Voltmeter Ammeter, Red and Blue Digital Multimeter Display Voltage Current Tester,DC 0-100V 10A Detector Voltage Current Meter Panel Amp Volt Gauge

  • 2.2pcs Accurate Voltmeter Ammeter DC0-100V Voltage 10A Current Meter 2-in-1 Digital Multimeter 10A Volt Amp Tester Meter with 5 Wires 0.28" Red and Blue Dual LED Display.
  • 4.Operating Humidity: 10 to 80% (non-condensing).
Check Stock

AC-L200 AC-L25A Mobile Power Bank USB Charger Cable for Sony Cyber-Shot Camera and Handycam DCR-IP/DVD/HC/SR/PC HDR-HC/UX

  • ★ DC drive cable can't only play the role of power adapter,while also serving to effectively suppress harmonic current noise..
  • ★ High-quality chips,DC-DC converter,high conversion efficiency.Good stability,can output high current,quiescent current is small..
  • ★ Using a wide range,suitable for all 7.2V-8.4V digital camera and video camera, Support part 9 v digital products..
  • ★ Since the camera itself does not support the fast charging function, some USB ports with quick charging function can't start the quick charging mode of 5V 2.4A-3A, resulting in insufficient power supply. Recommended for normal mode 2.4A, 3A is be better..
  • ★ DC drive cable connected power bank supply for digital cameras, power bank capacity: 8000-30000mAh,equal to the new battery in the camera's power many times.
  • When you turn on the flash to take pictures or video,to provide uninterrupted power supply..
Check Stock

Juried Engineering CD4052BE CD4052 CMOS 20-V, 4:1, 2-Channel Multiplexer IC Breadboard-Friendly DIP-16 (Pack of 5)

  • Wide Range of Digital and Analog Signal Levels Digital: 3 V to 20 V Analog: ≤ 20 VP-P, Break-Before-Make Switching Eliminates Channel Overlap.
  • Low ON Resistance, 125 Ω (Typical) Over 15 VP-P Signal Input Range for VDD – VEE = 18 V.
  • High OFF Resistance, Channel Leakage of ±100 pA (Typical) at VDD – VEE = 18 V, Maximum Input Current of 1 µA at 18 V Over Full Package Temperature Range, 100 nA at 18 V and 25°C.
  • Logic-Level Conversion for Digital Addressing Signals of 3 V to 20 V (VDD – VSS = 3 V to 20 V) to Switch Analog Signals to 20 VP-P (VDD – VEE = 20 V) Matched Switch Characteristics, rON = 5 Ω (Typical) for VDD – VEE = 15 V Very Low Quiescent Power Dissipation Under All Digital-Control Input and Supply Conditions, 0.2 µW (Typical) at VDD – VSS = VDD – VEE = 10 V.
  • Binary Address Decoding on Chip, 5 V, 10 V, and 15 V Parametric Ratings, 100% Tested for Quiescent Current at 20 V.
Check Stock

Diode Check

  • ... has a built-in 10 amp circuit breaker, the input current can be reversed to form a loop power supply, and it automatically trips when the current exceeds 20A, protecting the equipment and extending its life..
  • 【Injector Tester & Injector Cleaner】CODIAG GT 101 Power Digital Tester has a DIY injector cleaning adapter kit, which supports DIY cleaning of injectors. When the fuel injector is driven to open and close, and the current shows a normal value, it means that the fuel injector is normal. If it does not move or the current display is abnormal, it means that the injector is damaged. When checking the injector for clogging, it can be cleaned by cleaning the pressurized tank with the injector..
  • 【20ft Test Cord & Color Display & Torch】Car circuit tester with 20ft extension cord, powered by car battery or cigarette lighter, extension cable port extension provides excellent accessibility for testing along the vehicle. With a digital color display, you can clearly read the voltage and current data. Built-in flashlight and LED bi-color light make it easy to work even in dark or low light conditions..
Check Stock

AUTENS AC Digital Meter AC 80-260V 100A Current Voltage Power Energy Panel Monitor (AC 100A Meter with Split Core CT)

  • MULTIFUNCTIONAL DIGITAL MULTIMETER: With a large-screen LCD display interface, it can display six parameters at the same time, including Voltage Current Active Power Energy Frequency and Power factor at the same time. Measuring Voltage range AC 80V-260V.
  • Power Factor range 0-1PF. It will be more convenient to install with a split current transformer..
  • OVERLOAD ALARM FUNCTION: Backlight and power will flash simultaneously to give an alarm if active power value exceeds the preset value. Alarm value can be set by yourself, but applied load should not exceed the rated power. This AC digital meter is suitable for indoor, please do not use outdoor..
  • POWER-OFF DATA STORAGE FUNCTION: The last test data is stored automatically when the power supply abruptly lose. No More worry about data loss due to sudden power outages. This digital meter can only measure the Active Power but not Apparent Power. If you measure power from a DC-AC inverter, please make sure it’s PURE SINE WAVE, or the meter can be burnt or melted..
  • ONE-BUTTON CONTROL: The button can be used to control the backlight, reset energy and preset power alarm limit. Short press the key to turn on or off the backli....
Check Stock

UNI-T UTG962 Function Generator, UTD2152CEX Oscilloscope, UTP1306 Switching DC Power Supply

  • UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one..
  • Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer..
  • Multimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitance..
  • True RMS Multimeter for Voltage, Current, Resistance, Capacitance, Duty Cycle & Diode test. Double Insulated and Protected against Overcharges..
  • Simplify operation, convenient to use. Portable, light weight. Automatic Sleep Mode, Automatic Power Off, Automatic Range, Automatic Polarity Indication, Automatic Over-range Indication..
Check Stock

Hantek 2C42 Handheld Oscilloscope Multimeter 2 in 1 Multifunction Tester 2CH+DMM 40MHz Scope

  • 40 MHz Digital Oscilloscope with 2 channels -- Sample Rate Range 250MSa/s(Single-channel), 125MSa/s(Dual-channel). (Waveform Generator can't be used).
  • Simplify operation, convenient to use: 250M Sampling rate, 40MHZ Bandwidth. 10MV-10V Vertical resolution.
  • Key tone settings, Adjustable backlight brightness, Backlight, duration and auto power off time. Digital voltmeter function, Cursor measurement, reference waveform,waveform Storage function..
  • Multifunction Digital Multimeter Function, High sensitivity and accuracy, showing clear, stronganti-overload capability, easy to carry. Digital multimeter which can be used to measure AC/DC voltage/current, resistance, diode,capacitance, on-off test..
  • Large-capacity Lithium Battery + Ultra Low Power + Type C Data Transfer/Charging Interface 18650 replaceable lithium battery power system.
  • Be able to recharged by 5V/2A large current or ordinary computer USB port,allow while charging, very convenient and handy.
  • Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months..
  • We offer 1 year warranty with 30 days worry-free return, so 100% satisfaction and zero hassle....
Check Stock