ReviewsDigital Depth Micrometer

Kynup Digital Caliper 8 Inch Caliper Measuring Tool with Stainless Steel IP54 Splash Proof Protection Design Easy Switch from Inch Metric Fraction Large LCD Screen 200mm

【3 Units Conversion】 You can switch 3 units with the calipers: inch, mm and fraction based on your habits with the push of a button. Press the....
【Precise & Accurate】 Kynup 8" caliper has a measurement range of 0 - 8''/ 0 - 200mm.
accuracy to ±0.001”/0.02mm and resolution to....
【4 Measuring Ways】 Caliper measuring tool comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal....
【Splash Proof & Stainless Steel Material】The Splash Proof micrometer is constructed of first-class STAINLESS STEEL, Splash Proof, anti-rust, which....
【Wide Application & Auto Off】The 8 inch caliper micrometer is always used by professionals and hobbyists alike, by jewelers, hobbyists,....

Check Stock

Digital Caliper, 6 Inch Caliper Measuring Tool Micrometer Vernier Caliper with Stainless Steel, Electronic Micrometer Calipers with Large LCD Screen, Auto-Off Feature, Inch Metric Fraction Conversion

PRECISE & ACCURATE: Digital micrometer have a measuring range of 0 - 6"/ 0 - 150mm.
accuracy ±0.001"/ 0.02mm, resolution 0.0005"/ 0.01mm. A perfect and accurate caliper measuring tool for household or DIY, convenient for your measurement works, especially as woodworking or drafting calipers..
3 UNITS CONVERSION: 6 inch digital caliper can be measured by one button in unit switch, inch, millimeter and fraction based on your habits with the push of a button, easy to use. And you can also reset the data to zero through zero button when you take the second measurement..
STAINLESS STEEL CALIPER: The body of the caliper measuring tool is made of finely polished stainless steel, and the caliper has knurled thumb wheels and locking screws to ensure smooth slide and accurate positioning during measurement..
4 MEASUREMENT MODES & AUTO OFF: This caliper measuring tool comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal diameter to meet your multiple needs. Caliper will automatically turn off within 5 mins when not running, which can extend the battery life cycle..
WIDE APPLICATION: This electronic precision caliper is always used for professionals and hobbyists alike, by carpenter, jewelers, hobbyists, woodworkers,....

Check Stock

LuckyHigh Precision Micrometer Holder Stand Cast Iron Base Rubber Lined Jaws Inspection Fixture

Micrometer holder base is made of cast iron. The clamp is equipped with rubber pad to avoid damaging the instrument and protect instrument in the process of clamping..
Rubber lines jaws are 1.5" wide, will open to 0.75" (18mm)..
Micrometer Holder Stand fit for most inside and outside micrometers..
Micrometer Holder Stand Jaws can rotate 50 degrees forward and 30 degrees back..
Micrometer Holder Stand is mainly used for clamping 0-4" micrometer to provide high measurement stability..

Check Stock

50mm Caliper Calibration Rod, Stainless Steel Calibration Bar for Accurate Measuring

STAINLESS STEEL MATERIAL: The outside micrometer is made of premium stainless steel, so it is not easy to deform and is durable in use..
HIGH QUALITY: The outside micrometer standard caliper is 100% brand newbrand new and has a high quality..
VARIOUS SPECIFICATIONS: The outside micrometer standard caliper is a professional measuring tool, there are various specifications for your choice..
CONVENIENCE: The stainless steel outside micrometer calibration bar has reasonable size and light weight, which is convenient to use and carry..
MAIN APPLICATION: The stainless steel outside micrometer calibration bar is mainly used for calibrating micrometers..

Check Stock

Mini Micrometer 10mm Small Micrometer Pocket Size Metric 0-10mm x 0.01mm

A MINIATURE Pocket size Micrometer only weighs 1.35oz..

Check Stock

Frankford Arsenal Universal Bullet Seating Die for .224 to .338 Caliber with Micrometer Stem and Storage Case for Reloading, Black

CONVENIENT: Experience precise micro-adjustments to the seater depth of the bullet with a built-in micrometer.
EASE OF USE: Holds bullet in place while seating and has an adjustable seating depth.
VERSATILE: Works for .224 - .338 cal and has a standard 7/8 x 14 thread.
DESIGN: One alignment sleeve and VLD bullet seating stem are preassembled in the die.
INCLUDES: 9 Bullet alignment sleeves, 3 VLD bullet seating stems and a molded storage case.

Check Stock

Fowler 54-225-456-0, IP54 Digital Depth Micrometer with 0-6\/150mm Measuring Range

Depth Gauge: Features an automatic switch off, an LCD display, friction thimble, microlapped 4” base for repeatable and accurate readings, six interchangeable rods for providing rapid measurement of hole depths, and an electronic counter.
Precision Measurements: Features a 0-6"/150mm range, a resolution of 0.00005"/0.001mm, and accuracy of 0.00016″/0.004mm.
Rod Extensions: Six rods included, all with a diameter of 0.176".
Durable Material: Features a base constructed of hardened and ground tool steel to ensure long wear and continuing accuracy.
Set Includes: A depth micrometer with an LCD that displays in inch/metric and is water resistant to Ingress Protection 54 (IP54) standards with six extension rods and a fitted case.

Check Stock

Digital Caliper Measuring Tool 6 Inch Small Vernier Caliper Electronic Micrometer Machinist Woodworking Tools

...start a new measurement at once, ideal for differential measurements. Also zero calibration provides precise results when readouts are not accurate..
【Large LCD Display】: Equipped with an easy-to-read large LCD display that displays instant readings digitally, which is more convenient than any vernier caliper or micrometer caliper.
Automatic shutdown after 5-8 minutes of no operation to helps you save battery power..
【Wide application】: Professionals and enthusiasts can use. A great choice for mechanics, carpenters, jewelers, craftsmen, hobbyists, DIYers, auto mechanics and more. Plus, it comes with a black portable rugged case for easy storage, pressure and shock resistance. Comes with LR44 battery backup.
one year warranty for complete satisfaction..

Check Stock

Metric Micrometer

【Outside Micrometer Set】0.0001" precision micrometers are available in a variety of sizes:0-1", 1"-2", 2"-3", 3"-4", with 3pcs benchmark rods and....
【Thickened Carbide Head】 The outer micrometer is made of tungsten steel and hard alloy, and surface powder coated baked finish, which is more....
【Ratchet-stop Thimble Design】The ratchet-stop thimble on the micrometer tools spindle provides constant force, prevent screwing too tight, make....
【Multi-purpose】Metric Micrometer are widely used for precise measurement of length, diameter or thickness..
【Strong Warranty】 Ruitool are confident with the quality of our Outside Micrometers Set that we offer a one year manufacturer warranty when....

Check Stock

Starrett 949 Case only for Electronic Outside Micrometer NO.3734/734 Series

The Starrett 949 Deluxe Padded Case is sized to store and protect a single outside electronic micrometer that measures to 1 inch (25 mm)..
The case has rounded edges, is made of steel with a vinyl covering, and has fitted foam padding to house an electronic micrometer, a CR2450 battery, and adjustment wrench (sold separately)..
The case is an accessory for use only with a Starrett micrometer that measures 0-1” (25 mm)..
Fits Model Series 731, 733, 734, 3734, 756, 788, 733.1, 756.1 and 788.1 (Micrometer sold separately)..

Check Stock

Fowler 52-240-006-1 Outside Inch Micrometer with 5-6 Measuring Range

Micrometer: The Fowler series of outside micrometers features exceptional quality and accuracy with a ratchet thimble.
Accurate Readings: Micrometer has microfine 0.0001" graduations and accuracy of ±0.00025".
carbide-tipped anvil and spindle have 0.256" measuring....
Easy-to-Read Display: Distinct figures and graduations on the micrometer permit easy reading that allows for measuring with extra ease and comfort.
Durable Construction: Hardened, precision-ground, and carbide-tipped anvil and spindle with microfine graduations.
Set Includes: A Fowler micrometer with ratchet thimble, a standard, a wrench, and a fitted case.

Check Stock