ReviewsDigital Depth Micrometers

Mitutoyo 177-125 Setting Ring, 8mm Size, 10mm Width, 32mm Outside Diameter, +/-1.5Micrometer Accuracy

  • Actual inside diameter is marked on each ring.
  • It is used as an accessory for inside micrometers, hottest and dial bore gauge.
  • Used for quick zero adjustment of dial bore gauges, hottest, and inside micrometers.
  • Package Dimensions: 5.334 L x 1.778H x5.588W(centimeters).
Check Stock

Micrometer Stand Cast Iron Base Rubber Lined Jaws 4.75” wide x 6.5” long x 4.5\ High MS-1

  • Will allow benchtop use of standard micrometers or other small hand tools.
  • Cast iron base is a generous 4.75” wide x 6.5” long..
  • Rubber lines jaws will protect measuring tools, are 1.5” wide, will open to .75” and will accept most inside and outside micrometers..
  • Jaws rotate 50 degrees forward and 30 degrees back..
Check Stock

Oreck Commercial 151803 Premier HEPA Backpack Vacuum Bag, 10 qt Capacity (Pack of 6 Bags)

  • For use with the Oreck Commercial OR1001 backpack vacuum cleaner (sold separately).
  • Meets U.S. Department of Energy Standard 3020 for HEPA filters.
  • Helps remove at least 99.97 percent of airborne particles that are 0.3 micrometers or greater in diameter.
Check Stock

Stainless Steel Calibration Block Rod Bar Professional Standard Caliper Outside Micrometer Calibration Rod for Calibrating Micrometers 100mm

  • 【A SCOPE OF APPLICATION】This calibration block is mainly used for calibrating micrometers..
  • 【HIGH PRECISION TOOLS】The stainless steel calibration bar is professional measuring tool, various specifications for your choice..
  • 【100%BRAND AND NEW】The stainless steel calibration bar is 100% high quality and brand new..
  • 【SOPHISTICATED CRAFTS】The stainless steel calibration bar is made of premium stainless steel, not easy to deform, durable in use..
Check Stock

WYNNsky 80mm Digital Height Gauge Magnetic Mini Height Gauge Depth Gauge for Saw Table Thickness Gauge with Magnetic Self Standing for Woodworking Home Decoration

  • Application: Mini digital height gauge suitable for measuring holes, grooves, manual router table saws. Large digital display for quick reading, easily change mm/inch, relative and absolute values. Made of tough plastic, durable for woodworking, construction, home decoration, table saws, routers, etc..
  • Feature: Featuring a measuring rule with locking screw, this mini digital height gauge provides measurements in mm/inch with read-out accuracy to 0.1mm. The unit of measurement is easily changed via the touch of a button, and digital readings are displayed on the large, simple-to read LCD screen..
  • Magnet Base: The gauge can be set to zero at any point along the slide scale. It’s capable of measuring both vertically because of its flat back and magnetic base horizontally too..
  • Measuring Range: This gauge possesses a 0-80mm measuring range and hole depth measuring 50mm, with a 60mm wide aperture. To extend the range, simply attach the extension probe. Connect the probe to the other end and it becomes a depth scale..
  • There are plenty of uses for this economically-priced digital gauge. It’s self-standing for setting the cutter depth on router tables and saws tables, as well as being low-profiles enough for adjusting the fence position on band saws. Other f....
Check Stock

Premium Outside Micrometer Set 0-4\ / 0.0001\ (0-1\/1-2\/2-3\/3-4\) Precision Machinist Tools w/Carbide Tips, Standards, Ratchet Stop

  • HIGH-PRECISION MEASURING TOOL SET: Set includes a 4 carbide outside micrometers, calibration standards, and adjusting wrenches packaged neatly in a padded hard shell case. Every order you will receive a set of 0-1" / 1-2" / 2-3" / 3-4" outside micrometers with microfine Graduations: 0.0001" and Accuracy: ±0.0001" for precise readings every time.
  • FRICTION/RATCHET-STOP THIMBLE: Each micrometer has a metal ratchet-stop thimble with a speeder knob to reduce the time it takes to open and close the micrometer. To Prevent over tightening the constant-force mechanism stops the micrometer’s spindle from tightening once it contacts the surface of the measured object.
  • EXCLUSIVE RED COLOR FINISH: We believe your tools should work great and be something you're proud to display. That's why we have designed this exclusive Direct-Reading Vernier Scale Micrometer set unlike any of the others. The red textured design and satin chrome thimble helps resist rust, reduce glare and are easily identifiable in your shop.
  • WIDE VARIETY OF USES: This Outside Micrometer Set is Perfect for DIY, Hobbyists, CNC Machinists, Fabricators, Automotive Mechanics, and Inspection Tools. Sandor Tools Outside Micrometers help you measure the outside dimensions (OD) of raw materials, whole wo....
Check Stock

Rigol MSO5074 - Four Channel, 70 MHz Digital/Mixed Signal Oscilloscope

  • 70 MHz Digital Oscilloscope with 4 channels, 8GS/s, 100Mpoint memory.
  • Four channel, 70 MHz digital / mixed signal oscilloscope.
  • 100 Mpts memory depth, optional memory depth up to 200 Mpts.
  • 16 digital channels included - requires optional PLA2216 logic probe to operate.
Check Stock

Rigol MSO5104 - Four Channel, 100 MHz Digital/Mixed Signal Oscilloscope

  • 100 MHz Digital Oscilloscope with 4 channels, 8GS/s, 100Mpoint memory.
  • Four channel, 100 MHz digital / mixed signal oscilloscope.
  • 100 Mpts memory depth, optional memory depth up to 200 Mpts.
  • 16 digital channels included - requires optional PLA2216 logic probe to operate.
Check Stock

Humminbird 410200-1 HELIX 5 DI G2 Fish Finder

  • 【HIGH PRECISION】Press keypad Mode to switch SH, DP, KL, UN function. Used to turn on or off the monitor. Short press to set the value required, and keep the digital increasing or decreasing fluently. Depth sounder transducer, depth sensor, depthtrax. Algorithmic programming significantly reduces false readings and produces unmatched precision..
  • 【FAST RESPONSE】The working voltage is 9‑32V, up to 36V, low power consumption, long life, high accuracy, short start up time, the highest depth indication of 100m, you can instantly know the depth of the water. The sonar technology allows for depth readings through solid fiberglass hulls and up to 1/8-inch aluminum hulls..
  • 【INTELLIGENT ALARM SYSTEM】This in dash digital depth sounder is work with 12V system only, to indicate the depth appointed. Normally, the buzzer beeps once when it was connected correctly then turn on the power. 3 stage Advanced Warning System clearly signals an alarm condition with an audible alarm, an ultra bright red LED warning light and LCD alarm indicators..
  • 【DURABLE WATERPROOF MATERIAL】Made of stainless steel 316L bezel and anti fog glass, ....
Check Stock

Hornady Lock-N-Load Beam Scale - Analog Powder Scale for Reloading Tasks - 0 to 500 Grain Precise Measurement Range, Accurate to 0.1 Grain - Easy to Read, Laser Etched Scale - Item 050109

  • Hornady Reloading Beam Scale – For reloading enthusiasts that prefer an analog powder measure compared to an electronic scale. An essential tool for any well-stocked reloading bench. Item no. 050109.
  • Precise and Consistent – The Hornady Scale has a classic, time-proven manual balance system that provides a measurement range from 0 to 500 grains. Consistent within a 0.1 grain sensitivity.
  • Easy to Read Measurements – The balance bar of this Hornady Powder Scale is laser etched and will not flake or peel. Features hardened pivot pins & bearings for durability.
  • Accurate and Reliable – The magnetic dampener provides fast, accurate measurements. Handles most reloading tasks. Made in the USA.
  • Precision Measuring – Hornady offers a variety of measuring tools, from micrometers and calipers, to powder measuring scales and precision tools for measuring rim thickness, bullet seating depth, bullet uniformity and more. By using these tools, you’ll achieve better accuracy and reliable results.
Check Stock

SAFELIFE Digital Tire Tread Depth Gauge, 3 Modes-Fractional Inch, Decimal Inch and Millimeter, Zeroable Tire Tread Depth Gauge for Motorcycles,Cars,Trucks,Vans,SUV Accurate Tyre Tread Depth Gauge

  • 3 MODES READABLE RANGE: Accuracy tire tread depth gauge has One-touch switch for Metric MM and SAE with option of decimal or fractional inch interchange. Readable range - able to show tread depth from 0-25.4mm in metric or 0-1-inch in sae (32/32-inch)..
  • ZEROABLE and BATTERY SAVE: Depth Gauge can be zeroed at any position for easy adjustment and precision readings. to preserve the included 3V CR2032 battery, the gauge will automatically shut off after 5 minutes of inactivity..
  • LARGE LCD DISPLAY: Digital screen makes tire depth gauge easier to read. The depth bar with scale, also can be meansuread the tire depth when the digital tire tread depth gauge's battery has run down..
  • WIDELY USAGE: Tread depth gauge suitable for all vehicle tires, truck, car, moto, pick-up measuring tread depth and brake pad wear.
  • minimizing tire surface damage and car accidents. Compact and portable design fits easily into a pocket or tool pouch..
  • ENSURE YOUR SAFTY:Normaly Driving Least 1.6mm. Always High Speed Condition Least 3mm. Driving in Rainy and Snowy Weather Least 4mm.Always be Safe.
Check Stock