ReviewsDigital Internal Micrometers

Mitutoyo 177-125 Setting Ring, 8mm Size, 10mm Width, 32mm Outside Diameter, +/-1.5Micrometer Accuracy

Actual inside diameter is marked on each ring.
It is used as an accessory for inside micrometers, hottest and dial bore gauge.
Used for quick zero adjustment of dial bore gauges, hottest, and inside micrometers.
Package Dimensions: 5.334 L x 1.778H x5.588W(centimeters).

Check Stock

Micrometer Stand Cast Iron Base Rubber Lined Jaws 4.75” wide x 6.5” long x 4.5\ High MS-1

Will allow benchtop use of standard micrometers or other small hand tools.
Cast iron base is a generous 4.75” wide x 6.5” long..
Rubber lines jaws will protect measuring tools, are 1.5” wide, will open to .75” and will accept most inside and outside micrometers..
Jaws rotate 50 degrees forward and 30 degrees back..

Check Stock

Oreck Commercial 151803 Premier HEPA Backpack Vacuum Bag, 10 qt Capacity (Pack of 6 Bags)

For use with the Oreck Commercial OR1001 backpack vacuum cleaner (sold separately).
Meets U.S. Department of Energy Standard 3020 for HEPA filters.
Helps remove at least 99.97 percent of airborne particles that are 0.3 micrometers or greater in diameter.

Check Stock

Stainless Steel Calibration Block Rod Bar Professional Standard Caliper Outside Micrometer Calibration Rod for Calibrating Micrometers 100mm

【A SCOPE OF APPLICATION】This calibration block is mainly used for calibrating micrometers..
【HIGH PRECISION TOOLS】The stainless steel calibration bar is professional measuring tool, various specifications for your choice..
【100%BRAND AND NEW】The stainless steel calibration bar is 100% high quality and brand new..
【SOPHISTICATED CRAFTS】The stainless steel calibration bar is made of premium stainless steel, not easy to deform, durable in use..

Check Stock

Premium Outside Micrometer Set 0-4\ / 0.0001\ (0-1\/1-2\/2-3\/3-4\) Precision Machinist Tools w/Carbide Tips, Standards, Ratchet Stop

HIGH-PRECISION MEASURING TOOL SET: Set includes a 4 carbide outside micrometers, calibration standards, and adjusting wrenches packaged neatly in a padded hard shell case. Every order you will receive a set of 0-1" / 1-2" / 2-3" / 3-4" outside micrometers with microfine Graduations: 0.0001" and Accuracy: ±0.0001" for precise readings every time.
FRICTION/RATCHET-STOP THIMBLE: Each micrometer has a metal ratchet-stop thimble with a speeder knob to reduce the time it takes to open and close the micrometer. To Prevent over tightening the constant-force mechanism stops the micrometer’s spindle from tightening once it contacts the surface of the measured object.
EXCLUSIVE RED COLOR FINISH: We believe your tools should work great and be something you're proud to display. That's why we have designed this exclusive Direct-Reading Vernier Scale Micrometer set unlike any of the others. The red textured design and satin chrome thimble helps resist rust, reduce glare and are easily identifiable in your shop.
WIDE VARIETY OF USES: This Outside Micrometer Set is Perfect for DIY, Hobbyists, CNC Machinists, Fabricators, Automotive Mechanics, and Inspection Tools. Sandor Tools Outside Micrometers help you measure the outside dimensions (OD) of raw materials, whole wo....

Check Stock

Starrett End Measuring Rod with Insulated Handle and Spherical Ends for Comparing Gages and Measuring Parallel Surfaces - 1/4 Diameter 2 Length - 234A-2

Measure with Precision - The Starrett End Measuring Rods or Standards are for checking and setting micrometers of 2" capacity or larger and are also used on machine tools for comparing gages and checking precision measuring tools..
Firm Hold - The rubber handle provides insulation and a comfortable grip, making it easy to use for extended periods of time. Plus, the insulated handle helps minimize expansion by heat when held in the hand..
Multipurpose - These standards are the ones used for all micrometers furnished with standards. They are useful for measuring parallel surfaces and many other types of work..
Durable Construction - Made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. It is also available in larger sizes, so you can find the perfect fit for your needs..
The Standard for Excellence - Manufacturing quality tools that provide consistent and reliable performance since 1880, Starrett's commitment has earned them a reputation as one of the most trusted names in the industry..

Check Stock

VEVOR Micrometer Set 0-6' Machinist Tool Micrometer Set 0.0001' Accuracy 6 Pcs Precision Machinist Tool Set Micrometer, Laser-Etched Micrometer with Calibration Standards, Wrench

[ 6 Pcs Micrometer Set ]: Micrometer set includes 6 micrometers with measuring range: 0-6" (0-1"/1-2"/2-3"/3-4"/4-5"/5-6"),and microfine Graduations is 0.0001",also the accuracy is 0.0001",ensure a precise measurement every time..
[ Calibration Standards & Wrench ]: The micrometer set comes with 5 calibration standards and 1 adjustment wrench,which provides you precise adjustment solutions..
[ Precision Machinist Tool ]: It works with high accuracy of 0.0001'', Micro-lapped carbide tipped measuring face make more accurate reading,and the laser-etched graduations will never fade..
[ Durable Material Micrometer ]: The outside micrometers are made of heat and corrosion resistant cemented carbide and cast Iron, which makes it work perfect in different condition. Satin chrome finish on thimble and sleeve is rustproof and reducing glare..
[ Wide Application for Your Needs ]: This outside micrometer set is ideal for DIY, Hobbyists, CNC Machinists, Fabricators, Automotive Mechanics, and Inspection Tools etc,help you measure the outside dimensions of raw materials, whole workpieces and more of metalworking and other industrial measure needs..

Check Stock

Analog Devices ADG509ATQ Analog Multiplexer

【16-channel Analog Multiplexer】- This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
【Used for】- It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
【Process Digital Signals】- Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
【Bidirectional Internal Switch】- The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent cross talk, please turn off the switch first and then on..
【Note】- Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected). Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering..

Check Stock

RaceWax Digital Elite Ski Snowboard Tuning Kit Complete Edge-Base Tools Wax Iron

The RaceWax Digital Elite Ski Snowboard Wax Tuning Kit has the same components as the regular Elite kit except that the iron has a digital temperature....
Digital waxing iron with a digital readout that will continuously display the current operating temperature.. Heats quickly to deliver a working....
Swix Base-Side Dual Edge Tool. Dial a precise side angle from 0 degree to 5 degrees and base angle of 0.5 to 1.0 degree. Nine angles total.....
Two 60 g bars Swix Wax - 1 Red/Warm mid-range temp - 1 Blue/Cold temp.
5 mm thick tough plexi wax scraper with classic orange RaceWax logo. Complete....
Large Cordura tool bag: Internal strap to secure wax iron.
two internal open-access tool pockets and zippered mesh pocket.

Check Stock

Digital Caliper,0-6'',Dekiraych Metric,Inch,Fraction Caliper Measuring Tool, Stainless Steel Electronic 6 inch Caliper Measurement Tool, IP54 Waterproof Vernier Caliper, Large LCD Display (150mm)

【Precise Measuring Modes/Range/Resolution/Display】Electronic Micrometer Caliper Measuring Modes: mm/inch/fraction,Range:0~6 inches/0~150mm, Resolution:0.0005"/0.01mm, Display:Large LCD with automatic on/off..
【Stainless Steel Body/Zinc Alloy Shell Protection for LCD】First Class Stainless Steel Brake Caliper Tool ,Zinc Alloy Shell for LCD with frame of knurled thumb roller and locking screw head makes caliper gliding smoothly and positioning accurately .Precise Caliper Set with Internal and External Fully Closed Up Measuring Jaws..
【4x Measuring Functions】Accurately and Easily Measure External/Internal/Depth/Step Dimensions, 6'' Digital Caliper Measurement Tool With Two Sets of Jaws..
【Valuable Caliper Set&2 Years Warranty】1x Digital Caliper.
1x Sturdy Portable Plastic Storage Case with Caliper Measuring Tool Instruction Manual.
1x Paper Case. 2 Years Limited Warranty..

Check Stock

AFM Safecoat Safe Seal Gallon

【SOFTWARE SYSTEM】 Windows 7/Windows 8/Windows 10/ Windows XP / Windows 2000 operating system, static, dynamic image continual capturing and replaying, many images in one screen.
easy for measuring, calculating, copying, editing freely, printing multi-format report, including the diagnosis database, offering the case analysis of reference.
【POWER IMAGE FUNCTION】Continuous capturing static images function makes it can browse the dynamic dozens of image.
Capacity of cine loop and record continuously for different frequencies dynamic image in sampling.
Image database can be edited at any time, and dynamic review dozens of images..
【INTERNAL MEASURING LIGHT】AWB way internal automatically measuring light, brightness auto adjustment and electronic shock-proof function, dynamic balance of focusing around。Quick focus CCD technique makes examination, observing, operating more conveniently.
【DSP DYNAMIC AUTO FOCUS】DSP dynamic auto focus system, 8 times digital zoom cooperating with the manual focal length adjustment, super near camera, can get the clear image far from 0.1m.
【COLOR DIGITAL OPTICAL ZOOM LENS】High-quality 1/4 inch color digital optical zoom lens, 18 times optical zoom, 800.000 pixels providing whole screen high-definition images.

Check Stock