ReviewsDigital Magnetic Angle Measurement Tool

Camber Gauge Digital Wheel Alignment Tool -90° to +90° Wide Range Wheel Alignment & Balancing Tools Accurate Caster Camber Gauge with Digital Display & Powerful Magnet & Positioning Bubble & Reset Key

  • ...e suspension,or to check the camber change before reinstalling. It can help you adjust camber and caster to maintain correct wheel alignment, reduce tire wear, and increase the speed of your car. It can also be used to adjust the levers of the rear wheels..
  • 【Easy-to-read Digital LCD Display & ±90° Wide Range Measurement】Wheel alignment & balancing tool is equipped with a clear digital display,allowing you to quickly read the caster and camber angles.You can check and adjust the castor and camber angles at a glance.This camber gauge also has a backlight for use in dark areas.The camber gauge has an ultra-wide measuring angle range from -90 to +90 degrees.It is suitable for wheel alignment of all vehicles,such as cars, motorcycles, trucks, vans, etc..
  • 【Powerful Magnet&Positioning Bubble Design for Accurate Measurement】There is a magnet with strong magnetic attraction at the bottom of the camber gauge,which can be easily attached to various magnetic surfaces.The magnet attached area of the camber gauge is smaller than that of the products on the market,which can ensure higher accuracy,but the suction is still stable.When attaching the camber gauge to the brake disc,adjusting the positioning bubble to the center can make the test more....
Check Stock

Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking, Metalworking, Construction

  • High Accuracy:This digital angle finder allows a full range 0-360°to measure internal angle,external angle & Contra angle Measuring precision is ±0.5°, resolution is 0.05° .You can switch between degrees and minutes to Improve the measurement accuracy , meet your requirements for different accuracy..
  • Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
  • Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
  • LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
  • Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t....
Check Stock

Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking Metalworking Construction

  • High Accuracy:This digital angle finder allows a full range 0-360°to measure internal angle,external angle & Contra angle Measuring precision is ±0.5°, resolution is 0.05° .You can switch between degrees and minutes to Improve the measurement accuracy , meet your requirements for different accuracy..
  • Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
  • Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
  • LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
  • Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t hesitat....
Check Stock

Digital Angle Finder Protractor,2 in 1 Auzof Angle Finder Ruler,7Inch / 200mm Stainless Steel Angle Measuring Tool with LCD Display for Woodworking/Carpenter(2 Batteries Included)

  • 【2 in 1 Digital Angle Finder】:Auzof protractor has the function of a 200mm/7.874in Stainless Steel ruler and a protracting tool. The combination of a millimeter and inch scale ruler and a protractor makes it easy to measure internal/external angles and fast measurements Length . Suitable for woodworking, construction, drafting and other fields..
  • 【High durability and precision】:This digital protractor is made of corrosion-resistant stainless steel straightedge, laser scale straightedge measurement error 1mm, Measuring Range: 0-360°.
  • 【Lock, Zero, Hold and Degree conversion Functions】This protractor can be locked at any angle by rotating the Locking Knob and pressing the HOLD function button will hold the reading.Long press on the "Rev" button, the display can be converted ° and ′. Zero button can reset the angle measuring tool at any time..
  • 【Large LCD Display &2 Batteries Included 】 Auzof digital protractor is equipped with a large LCD display for easy reading Resolution 0.1° Clear readings even in low light conditions,Also It comes with a CR2032 button battery inside, you can use it directly when you receive it. We also give you a additional battery as a spare..
Check Stock

S&F STEAD & FAST Digital Angle Gauge Magnetic with Laser, 4 Magnets, Measures and Sets Angles, Angle Cube Protractor Level with Case, Angle Finder Tool for Table Saw, Woodworking

  • Premium angle measurement tool - Digital Angle Finder made to high specifications with zero function feature, strong magnets in base, 2 sides and back.
  • Large screen - Small and compact magnetic angle finder with extra large LCD screen and highly visible contrast display - make it easy on your eyes when setting up or measuring angles.
  • V-groove - Accurate digital level designed with grooves in the base and 2 sides to fasten it securely to pipes, very simple to use on conduit and any round ferrous material.
  • Laser - Integrated laser beam to help set up straight lines - CAUTION do not stare into the beam or direct it to people.
  • Case - Beautifully packaged in an attractive box with clear instructions manual and protective case, easy to carry and store.
  • perfect as a handy gift for woodworkers and other fans of home improvement.
Check Stock

Mitutoyo 950-317 Digital Protractor Non-Output

  • Backlight – Can be switched on and off. Taking readings in dark spaces is so easy now.Self-inverting display in bevel box makes for easy slope....
  • Versatile - Angle cube measuring absolute and relative angles in degrees ° or tilt %. Sturdy and durable aluminum frame, compact and lightweight,....
  • Convenient - Digital level angle finder tool with automatic powering off and hold function. Low battery warning supplied in angle meter. Magnetic base....
  • S&F STEAD & FAST digital angle gauge can be used under different temperature conditions, from 32ºF to 122ºF (0ºC to 50ºC) and in an humid....
  • We provide a protective pouch / case to store and carry your angle tool securely, two AAA batteries, a screwdriver, and a clear and comprehensive....
Check Stock

General Tools T-Bevel Gauge & Protractor #828 - Digital Angle Finder with Full LCD Display & 8\ Stainless Steel Blade

  • PREVENT WASTE: This digital 5” stainless-steel ruler and angle finder combination tool makes precise, easy and fast measurements..
  • CORNER ANGLE FINDER: Digital angle gauge includes an LCD reader, makings measurements easy to read, while the innovative center check notch enables exact ruler placement markings. Use the electric meter for custom cuts and crown molding..
  • LEVEL RULER: This tool is ideal for finding angles in tight spots, and with the lock feature, the user can improve accuracy and save time when finding the measurement. It's perfect for doing work on framing, custom furniture building, and flooring..
  • PROTRACTOR WITH SWING ARM: Our stainless steel digital angle finder with measuring ruler has a built-in reverse angle function for usability and convenience. It's an essential tool and a great gift idea for a fellow carpenter, student, or machinist..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

General Tools TS02 ToolSmart Bluetooth Connected Digital Angle Finder, Protractor, Level and 10.5-Inch Ruler

  • The ToolSmart Digital Angle Finder accurately determines the angle of any corner, easily determine the angle of any corner up to 225 degrees.
  • This digital protractor tool is especially useful for crown moulding and flooring applications to make sure you get perfect cuts every time.
  • Easily send inside and outside angle measurements to your smartphone with one click and quickly figure out compound angles with the ToolSmart App.
  • Using the ToolSmart App, you can also quickly and easily determine the materials and tools you will need to complete your project.
  • This next generation miter finder and angle measurement tool also incorporates a 10.5 in. ruler and horizontal & vertical bubble levels.
Check Stock

General Tools 29 Plastic Protractor and Angle Finder, Outside, Inside, Sloped Angles, 0° to 180° , Yellow

  • The digital level is more precise and often easier to use than old-school models with bubble vials.2.2” digital level's versatility and accuracy make it a must-have tool..
  • Strong Stable Magnetized Base---The bevel gauge with V-Groove strong magnetized base allowing you attach the cube directly to any ferrous metal surface, even a curved surface..
  • Easy to Read---Digital level has upgraded LCD screen, the measured values displayed are clearer and brighter, even in the dark does not affect reading..
  • Two Measurement Modes---Absolute angle mode and relative measurement mode, press the "ZERO" button to achieve relative/absolute measurement interchange at any position, could not be easier.This sturdy mini tool also functions as an inclinometer, protractor, and a level and bevel gauge..
  • Portable & Lightweight---eOUTIL digital inclinometer has portable size, it's convenient to carry and co-work with other measuring tools and enlarge measuring range. It is compact and very much affordable..
Check Stock

MiLESEEY Laser Measurement Tool 200ft, Curved Surface Measurement with Wheel, Digital Tape Measure, Pythagorean, Distance, Area and Volume Point to Point Measurement with Laser Line Marking Function

  • 3 IN 1 LASER MEASURE: Not only a laser tape measure, but also built-in smooth wheel to measure curve surface & columnar items, measure arc length easily without complicated calculate, save your time. With a built-in Gyroscope Chip, R2B laser tape measure has advanced Point-to-Point (P2P) measurement technology. It will compute the distance between two points, regardless of height or angle..
  • LASER LINE MARKING & ANGLE SENSOR: Long press to enter the laser line marking function, mark the red laser line on the target, the real-time angle of laser line is displayed on the screen, and it varies with the angle of device. It can provide us with collimated indicator lines for manufacturing, industry, construction. It can also automatically measures the angle due to the built-in electronic angle sensor. It will help you complete measurements quickly and accurately..
  • 50 GROUPS DATA MEMORY & LARGE LCD COLORED BACKLIGHT: This laser measure provides accuracy up to ±1/16 In., and remembers the last 50 measurements taken. With backlight LCD Colored screen, it provides you better visibility in dark areas. MiLESEEY laser measurement tool is safe, laser class 2 and laser tape 635nm .
Check Stock

GemRed 82412 Mini Digital Level Angle Gauge Angle Finder Protractor Inclinometer Aluminum Framework with Magnet

  • ...e years’ usage.【Two Measuring Mode】①Checking the true level. ②Checking the relative angle between two surfaces..
  • 【Lower Power Reversible LCD Display with ERROR indicator】 The Digital Angle Gauge has a large LCD display with backlight, which only needs one battery for providing accurate, quick and clear measurements and even you can easily read in dark environment. If the digital angle gauge is used in an incorrect position (e.g. tilts diagonally over 30 degree), display will tell ERROR to make sure that use is getting the accurate measurement..
  • 【Easy Battery Installation】You can install battery easily and need no screwdriver. WIth only one AAA battery, the digital angle gauge works 50 hours averagely. *Automatic shut-off after 5 minutes..
  • 【Packing contains】Digital angle gauge*1, 1.5V Alkaline battery*1, storage pouch*1, instruction*1.
Check Stock