ReviewsDigital Oscilloscope Frequency Counter

Riiai 2-in-1 Digital Oscilloscope & Transistor Tester, Real-time 2.5MS/s Sampling Rate 200kHz Bandwidth, 2.4 inch TFT Color Screen, PWM Square Wave Output, Diode Voltage Continuity Tester

⭐【2 in 1 Oscilloscope & Transistor Tester】--- This portable digital oscilloscope combines an electronic component tester, PWM signal generator, and other functions into one."Oscilloscope" mode to test the signal waveform of the circuit while"Mos Test" mode can test various types of transistors and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance, resistance, inductance components and etc. More cost-effective to use, more test functions to choose from..
⭐【High-precision & Real-time Display】--- The oscilloscope has a real-time sampling rate of 2.5MS/s and a 200kHz bandwidth. Up to ±400V voltage signal can be measured. Self-contained 80Khz/5.0V PWM wave test signal source with adjustable duty cycle. With a Single, Normal, Automatic trigger, it can be used for both periodic and aperiodic digital signals. Other modes include circuit continuity test, 0-16V input voltage measure, PWM output, 0-24V Zener diode measure and etc..
⭐【2.4 Inch TFT Screen & 1500mah Rechargeable Battery】--- The transistor tester adopts a built-in 1500 mah battery that will get fully charged within 1-2 hours via a 5V/2A adapter and can work for 4 hours(Finish Green Indicator/Charging Red Indicator). The digital handheld pocket oscil....

Check Stock

FNIRSI 1013D Plus Oscilloscope – Portable Handheld Tablet Oscilloscope with 100X High Voltage Prob, 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate 7″ TFT LCD Touch Screen

Professional Designed: FNIRSI oscilloscope has a real-time sampling rate of up to 1GSA/S and an analog bandwidth of 100MHZ * 2. Fnirsi oscilloscope has a complete trigger function (single/normal/automatic), it can be used freely for both periodic analog signals and aperiodic digital signals..
Highly Performance: 7 inches, 800 * 480 resolution, bright colors and high contrast. Ultra-thin and easy to carry. Built-in high-voltage protection module,can tolerate a continuous voltage of up to 400V. 6000mAh high-performance lithium battery, can be used continuously for 4 hours after fully charged..
Easy to Operate: Equipped with efficient one-button automatic device. One-click waveform saving and screenshots. The built-in 1GB storage space can store up to 1000 screenshots 1000 sets of waveform data.Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc.
Easily Measuring : Capacitive screen touch & gesture operation, cursor measurement function, when manually reading amplitude-frequency parameters, you do not need to read the background scale unit and quantity, and you can directly get the peak-to-peak value and frequency without conversion..

Check Stock

diymore Oscilloscope Case DIY Kit 2.4

It is simple to finish assembling the oscilloscope case kit pieces. It does fit like a glove.
diymore oscilloscope acrylic case will offer excellent protection while maintaining the beauty of your digital oscilloscope.
Note: The Kit doesn't include the oscilloscope, wish you could understand.
It is a function of design which this fits, all the parts were cut correctly and fit perfectly when assembled.
Acrylic material, looks transparent(need to tear down the film).

Check Stock

P4250 Oscilloscope Probe High-Voltage Probe Oscilloscope Probe BNC Oscilloscope Scope Clip Probe Test Lead Kit

DETACHABLE HOOK TIP: The oscilloscope scope clip probe has detachable hook tip, the hook is well protected by the plastic case.
HIGH PRECISION: Oscilloscope probe has insulated BNC head, high precision, suitable for all standard BNC head oscilloscope.
EASY TO USE: Oscilloscope clip probes have compact size, several functions combined in one, this probe is convenient to use.
STABLE PERFORMANCE: Locating sleeves of oscilloscope passive probes ensure the stability and reliability of the tip exposed to the test point.
PRACTICAL: Marker rings of digital oscilloscope clip probe in different colors help to identify different channels.

Check Stock

OWON HDS272S Oscilloscope 3 in 1 Professional Handheld PC Oscilloscope,20000 Counts Digital Multimeter, Universal Test Instrument, Large Capacity Lithium Battery(70 MHz+2CH+1CH Waveform Generator)

✨[20000 Counts Digital Multimeter ]: Digital multimeter be used to measure AC/DC voltage/current, resistance,diode,capacitance,on-off test. High sensitivity and accuracy, showing clear, stronganti-overload capability, easy to carry..
✨[Small Size & Powerful Function]: Mobile phone body,Oscilloscope, Digital Multimeter multifunction in one.3.5-inch high-resolution,high-contrast color LCD display,suitable for outdoor use..
✨[Great Power Management]: Ultra-low comprehensive power consumption less than 3W.Powered by 4400mAh lithium battery.The lithium battery may not be fully charged when delivered. To make the battery fully charged, it takes up to 4.5 hours (when the device is turned off) or it is subject to the charging indicator. After charging, the battery can supply power for about 6 hours..
✨[Excellent Oscilloscope Performance]: OWON Handheld Oscilloscope have two acquisition modes,high refresh,deep storage,7 kinds of auto measurement,cursor measurement function and save function..
✨[Waveform Generator Functions]: 70 MHz Digital Oscilloscope with 1-CH 125MSa/s Sampling Rate,20mVpp-5Vpp Amplitude Range, 8K Waveform Length, 14 bits Vertical Resolution and 50Ω Output Impedance..

Check Stock

Rigol MSO5074 - Four Channel, 70 MHz Digital/Mixed Signal Oscilloscope

70 MHz Digital Oscilloscope with 4 channels, 8GS/s, 100Mpoint memory.
Four channel, 70 MHz digital / mixed signal oscilloscope.
100 Mpts memory depth, optional memory depth up to 200 Mpts.
16 digital channels included - requires optional PLA2216 logic probe to operate.

Check Stock

Rigol MSO5104 - Four Channel, 100 MHz Digital/Mixed Signal Oscilloscope

100 MHz Digital Oscilloscope with 4 channels, 8GS/s, 100Mpoint memory.
Four channel, 100 MHz digital / mixed signal oscilloscope.
100 Mpts memory depth, optional memory depth up to 200 Mpts.
16 digital channels included - requires optional PLA2216 logic probe to operate.

Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe with Power Supply, (Assembled Finished Machine) EM001

【SIMPLE DESIGN】ETEPOPN EM001 oscilloscope kit is an assembled finished machine that can be used directly to avoid assembly/soldering process problems and saving you a lot of time. The display and MCU are mounted on the same board (motherboard) to avoid the use of inter-board pinouts. The analog channels are placed on a separate board containing most user-installed parts, thus allowing better separation of analog and digital circuits..
【UPGRADED VERSION】The sensitivity of the EM001 oscilloscopes has been extended both in width and height which is wider and higher than the others It reaches 5mV / div – 20V / div while the others is only 10mV / div – 5v / div..
【HAND-HELD】This updated digital oscilloscope can be hand-held while the others can only be used by placing it on the desktop..
【ROTARY ENCODER】It has been added the rotary encoder makes parameter adjustment more quicker and easier..
【WHAT YOU GET】You will get an assembled mini oscilloscope, BNC clip cable, and a power supply. Detailed operating instructions (troubleshooting guide) and schematics are also provided. If you have any questions about this digital oscilloscope, you can always contact us and we will reply within 24 hours..

Check Stock

Goupchn Oscilloscope Clip Probes 200MHz Fully Insulated BNC End Probe with Accessories Kit 1X 10X

Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
Package includes: 2 x probes, 16 x marker rings, 2 x ground wires, 4 x locating sleeves, 1 x adjustment tools, 1 x ground springs, 1 x user manuals, 1 x oscilloscope link adapters..

Check Stock

STARTO Handheld Digital Oscilloscope Kit 2.4” TFT with BNC-Clip Cable Probe and Power Supply

...f each acquired waveform) sampling points above 10K.
(2) Large 7-inch LCD TFT (true color) screen, 65535 colors, 800 x 480 pixel resolution, cursor measurement, and 4 automatic cursor modes..
(3)The Kiprim DS1202 oscilloscope has an automatic range function, supporting horizontal, vertical, single waveform, and multiple waveform tracking. Probe attenuation multiples: 1X, 10X, 100X, 1000X. Two trigger types: edge trigger, video trigger, three trigger methods: automatic, normal, and single..
(4)Built-in 6-digit hardware frequency meter, which can measure 2Hz to 20MHz, with current measurement function, measurement range: 100.0mA/V to 1KA/V. Support to connect to a computer, please contact us through Amazon for instructions and software downloads..
(5)This digital oscilloscope has 30 automatic measurement functions and can customize the measurement menu. Mathematical operations: addition, subtraction, multiplication, division, FFT. It also has a waveform cut-off function, which can be seamlessly connected to signal generators of the same brand. Support LABVIEW communication and secondary development..

Check Stock

OWON SDS1104 100MHz 4 Channels Digital Desktop Oscilloscope 1GS/s Sample Rate Portable Oscillometer

【Professional Storage Oscilloscope】- Super-economical digital storage oscilloscope.Cost-effectiveness,100MHz bandwidth,4 channels input,max input voltage 400 Vpp,1GS/s sample rate,8-bit high resolution,SCPI and LabVIEW (USBTMC) supported.Communicate with computer through the supplied USB cable.Front USB port,support U disk storage..
【7" LCD Screen & Simple Operation】- This oscilloscope with 7" large color LCD screen, 800 x 480 pixels display, clear and realistic waveform display。Easy-accessible operation menu gets you to the result conveniently。ultra-thin body and handle design, lightweight and portable, cooling holes on the back can ensure fast cooling during prolonged use..
"Multi-Function :Waveform storage function,16 sets of waveforms can be saved in the internal memory or U disk. The saved waveform and the measured waveform can be compared and analyzed. One-Click show all measurements,built-in 39 types of auto measurement,convenient to view the waveform information. FFT spectrum analysis function, supports for Hamming, Blackman, Rectangular, Kaiser, Bartlett.".
【Widely Used Oscilloscope】- With multiple trigger functions and more than 30 kinds of automatic measurement functions,Vmax, Vmin, Vpp, Vtop, Vbase, Vamp, Vavg, Vrms, Cycle RM....

Check Stock