ReviewsDigital Over Current Relays

BetterSub Print T-Shirt Machine DIY Digital Industrial Quality Heat Press Machine Clamshell Transfer Sublimation Print Press Machine 15‘’x 15'' Pink

  • ✔Ideal for Mass Printed T-Shirts✔New Industrial-Quality 15X15 Heat Press Machine.
  • ✔Safe Using: Solid-State Relays are more capable of protecting circuits and avoid fire in over voltage than Electronic Relay.
  • ✔LCD Control Board: Full digital control over those two parameters. Temperature range: 0-440℉ time range: 0-499 s.
  • ✔Teflon Surface: Easy to clean and more durable than cloth coated surfaces.
  • ✔Best for industrial, professional and home use: It is ideal for T-shirts, garments, bags, mouse mats, jigsaw puzzles, ceramic tiles, plates and other flat surfaced items..
Check Stock

Electronics-Salon DIN Rail Mount AC/DC 24V Control 8 SPDT 16Amp Pluggable Power Relay Module, G2R-1-E

  • OMRON G2R-1-E industrial power relays, switching current up to 16A at 250VAC (or 30VDC), and easy to replace pluggable relays..
  • LED indicator for each relay channel , relay coil protection by means of a freewheeling diode..
  • High quality screw terminal block, FR-4 fiber glass PCB, dual copper layers..
  • Panel mount or DIN rail mount versions are available. Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for panel mount use..
Check Stock

74LS153 Dual 4-Input Multiplexer (2 Pack)

  • Wide Range of Digital and Analog Signal Levels Digital: 3 V to 20 V Analog: ≤ 20 VP-P, Break-Before-Make Switching Eliminates Channel Overlap.
  • Low ON Resistance, 125 Ω (Typical) Over 15 VP-P Signal Input Range for VDD – VEE = 18 V.
  • High OFF Resistance, Channel Leakage of ±100 pA (Typical) at VDD – VEE = 18 V, Maximum Input Current of 1 µA at 18 V Over Full Package Temperature Range, 100 nA at 18 V and 25°C.
  • Logic-Level Conversion for Digital Addressing Signals of 3 V to 20 V (VDD – VSS = 3 V to 20 V) to Switch Analog Signals to 20 VP-P (VDD – VEE = 20 V) Matched Switch Characteristics, rON = 5 Ω (Typical) for VDD – VEE = 15 V Very Low Quiescent Power Dissipation Under All Digital-Control Input and Supply Conditions, 0.2 µW (Typical) at VDD – VSS = VDD – VEE = 10 V.
  • Binary Address Decoding on Chip, 5 V, 10 V, and 15 V Parametric Ratings, 100% Tested for Quiescent Current at 20 V.
Check Stock

AC Current Sensing Switch Adjustable Current 0.2~30A Flameproof ABS Self Powered Sensing Switch Users Manual (Normally Open)

  • ✔ Automation Equipment Control -- Control various automation industrial equipment, flashlights, buzzers, relays, microcontrollers, or other electrical load devices. An ideal choice for automated industrial equipment and power monitoring.
  • ✔ High Accuracy Stable Performance -- Compared with traditional device, thermal protectors and other devices, it has the advantages of high accuracy, stable performance and long service life. Installation Form: Guide Rail 35mmDIN.
  • ✔ Convenient Monitoring Detecting Current -- The current sense switch is for safety, simple, and convenient monitoring or detection of current in the electrical equipment. Threading Hole Diameter: 8mm. Shell Material: Fireproof ABS.
  • ✔ Used In Industries Current Monitoring -- Widely used in substation, frequency conversion speed control device, inverter device, electrolytic plating, electric locomotive, street lamp monitoring, coal mine and other automation industries that need current monitoring.
  • ✔ Electromagnetic Mutual Inductance Of Current -- Using the principle of electromagnetic mutual inductance of current, the advanced output detection, monitoring and protection alarm products developed by the non-power supply technology are adopted.
Check Stock

BetterSub 15x 15 Print T-Shirt Machine DIY Digital Industrial Quality Heat Press Machine Clamshell Transfer Sublimation Print Press Machine Ocean Blue

  • ✔Ideal for Mass Printed T-Shirts✔New Industrial-Quality 15X15 Heat Press Machine.
  • ✔Safe Using: Solid-State Relays are more capable of protecting circuits and avoid fire in over voltage than Electronic Relay.
  • ✔LCD Control Board: Full digital control over those two parameters. Temperature range: 0-440℉ time range: 0-499 s.
  • ✔Teflon Surface: Easy to clean and more durable than cloth coated surfaces.
  • ✔Best for industrial, professional and home use: It is ideal for T-shirts, garments, bags, mouse mats, jigsaw puzzles, ceramic tiles, plates and other flat surfaced items.✔The silicone pad color comes in random, blue or gray..
Check Stock

Veris,Current Switch,Micro,Split-Core,Fixed,NO, H300

  • Hawkeye 300 go/no go current switches provide a cost-effective solution for monitoring status on unit vents, exhaust fans, recirculation pumps, and other fixed loads where belt loss is not a concern..
  • Applications: Monitoring on/off status of electrical loads. Monitoring direct-drive units, exhaust fans, and other fixed loads. Verifying lighting run time. On/off status for direct-drive fans, pumps, and process motors. More reliable for status than relays across auxiliary contactsIdeal for direct-drive units, unit vents, fan coil units, exhaust fans, and other fixed loads. Great for lighting status. Less expensive than 277V relays. Low 0..
  • Ideal for small exhaust fans (not intended to detect belt loss. Removable mounting bracket provides installation flexibility. Monitor status of fans, pumps, motors & other electrical loads. Split-core for fast retrofit installation. Micro housing for tight enclosures..
  • Saves valuable panel space 100% solid-state, no moving parts to fail. Polarity insensitive output 5-year limited warranty..
Check Stock

Juried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 10

  • 20-V digital or ± 10-V peak-to-peak switching.
  • 280 ohm- typical on-state resistance for 15-V operation, Matched control-input to signal-output capacitance: Reduces output signal transients, Frequency response, switch on = 40MHz (typ.), Maximum control input current of 1 µA at 18 V over full package temperature range.
  • Switch on-state resistance matched to within 10 ohm typ. over 15-V signal-input range, High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k ohm, Low crosstalk between switches: –50 dB typ. @ fis= 0.9 MHz, RL = 1 k ohm, 5-V, 10-V, and 15-V parametric ratings.
  • Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog....
Check Stock

Juried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 20

  • 20-V digital or ± 10-V peak-to-peak switching.
  • 280 ohm- typical on-state resistance for 15-V operation, Matched control-input to signal-output capacitance: Reduces output signal transients, Frequency response, switch on = 40MHz (typ.), Maximum control input current of 1 µA at 18 V over full package temperature range.
  • Switch on-state resistance matched to within 10 ohm typ. over 15-V signal-input range, High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k ohm, Low crosstalk between switches: –50 dB typ. @ fis= 0.9 MHz, RL = 1 k ohm, 5-V, 10-V, and 15-V parametric ratings.
  • Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog....
Check Stock

Juried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 5

  • 20-V digital or ± 10-V peak-to-peak switching.
  • 280 ohm- typical on-state resistance for 15-V operation, Matched control-input to signal-output capacitance: Reduces output signal transients, Frequency response, switch on = 40MHz (typ.), Maximum control input current of 1 µA at 18 V over full package temperature range.
  • Switch on-state resistance matched to within 10 ohm typ. over 15-V signal-input range, High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k ohm, Low crosstalk between switches: –50 dB typ. @ fis= 0.9 MHz, RL = 1 k ohm, 5-V, 10-V, and 15-V parametric ratings.
  • Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog....
Check Stock

SparkFun Qwiic Single Relay-Up to 5.5A at 240VAC Multiple I2C addresses Available Turn on/Off high Power Device from Low Power microcontroller No Soldering Large Power Loads w/Simple I2C Commands

  • Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino compatible board or another low powered microcontroller? No soldering needed to get started. Plug and play. Code available. Small footprint..
  • The Single Relay board can handle up to 5.5A at 240VAC for long periods of time and allows you to control large power loads with simple I2C commands. Utilizing our handy Qwiic system, and on-board screw terminals, no soldering is required to connect it to the rest of your system!.
  • The Qwiic Relay comes with a default I2C address of 0x18 but can be changed with a simple command allowing you to control over 100 Qwiic Relays on a single bus (but please be aware that toggling lots of relays on a 3.3V bus can cause voltage spikes so an external power supply will be required)!.
  • In addition, there is an address jumper on the back of the board. Closing this jumper with solder will change the address to 0x19..
  • Operating Voltage: 1.7V-3.6V. Coil Resistance: 23.5Ω. I2C Address: 0x18 (Default), (Jumper changes to 0x19). Max Current (Through Relay): 5.5A (240 VAC).
Check Stock

Harrage Digital MIG Welder 160A 110/220V IGBT Inverter Dual Voltage Automatic Feed Flux Core Supports 2lbs/10lbs Gas Gasless MIG Welding Machine MIG/Lift TIG/ARC 3 in 1 Welder

  • Newest model: Advanced IGBT inverter technology, hot start ,excellent arc stability. Full 30-160Amp(max) with digital display, reliable quality and....
  • Portable Design: The 110V/220V MIG/Lift TIG/ARC 3 in 1 welder is compact and lightweight, easy to movement and store. Very convenient, can be used....
  • Syntheic digital current and voltage control ,when change the current, adjust the voltage automatically. The panel operation is very simple. The....
  • Safety, Automatic Protection Function for Over-current, Over-voltage and Over-heatin.
  • Multiple Use: The MIG welding machine is widely used, very suitable for DIY Users, Maintenance and Repair and Metal Fabrication. The welder is....
Check Stock