ReviewsDigital Time Delay Relay

AC100V~250V Infinite Cycle Delay Timer Timing Switch Relay Turn On Off Module 0.5s ~ 1000min Adjustable Time Delay Switch

【Simple Operation】Timer module enters into an infinite cycle mode when power on, and stops working automatically after the setting time, easy to....
【Adjustable】Relay timer has 0.5s~1000min wide adjustable time range, you can adjust the delay time both at "RUN" time and "STOP" time.
【Practical】The repeat cycle timer module can be used to control the reciprocating stroke, or repetitive power on and off for equipment and....
【Application】The delay timer module is suitable for timer operating equipment, machine repetitive test circuit and fish tank intermittent pump.
【Product Parameter】AC100V~250V voltage, delay timing timer relay switch can be used for 100V/110V/ 120V/ 127V/220V/230V/240V power.

Check Stock

uxcell BWL100 100 mm Pull Rod Linear Position Displacement Sensor for Printer

Shipping list: AC 220V vibration sensor delay module, with ultra-high sensitivity vibration sensor..
AC 220V power supply ultra-high sensitivity vibration delay module plus relay module plus delay three-in-one module, vibration switch module Alarm trigger, with 1 vibration sensor. Relay does not have B1 normally closed end..
corridor delay switch, delay energy-saving products.
Supply voltage: AC 220V power supply, Current: greater than 100mA.

Check Stock

ATO Phase Voltage Monitoring Sequence Relay 1 Phase Voltage Protection Relay Under Over Voltage with 1 CO + 1 NC Contacts AC/DC 24-48V

【Measuring Circuit】Phase sequence protection relay is compatible with AC and DC supply, the rated voltage is AC/DC 24-48V.
【High-quality Product】LCD display indicating voltage, operation and fault status, adjustable reset mode: automatic/manual/automatic with power-on delay reset, fault recording for the lately 3 faults.
【Mutiple Functions】Adjustable overvoltage and undervoltage threshold, independent adjustable delay time for over-voltage, under-voltage.
【Output Contacts】Monitoring relay with 1 CO + 1 NC contacts, and the capacity is 6A, 250V AC (resistive load).
【Wide Applications】Voltage monitoring sequence relay can be applied in equipment or devices from undervoltage and overvoltage in the applications like air compressors, electric motors, pumps, fans, air-conditioning system, blowers, elevators, cranes, refrigeration equipment, laser equipment, industrial control system, etc..

Check Stock

2Pcs STC-1000 Digital Temperature Controller 12V Thermostat Incubator Thermoregulator Relay Heating Cooling with Sensor Probe Cable

STC-1000 temperature controller has 2 relays, compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time..
Two work mode: Heating ( start temperature is less than stop temperature), Cooling ( start temperature is above than stop temperature), refrigerating contro, output delay protection.
STC-1000 temperature control range: -50-99°.
control accuracy of 0.1 degrees celsius, control temperature by setting the temperature setting value and the difference value, to set start temperature, stop temperature, corrected temperature correction, delay start..
1M waterproof probe, the digital temperature controller can be used in humid and water environment, you can use it in home brewing, refrigerator, pet feeding, reptile, tank, hatching, fermentation, nursery heat pad, accelerated germination..
Automatically switch between cooling and heating modes: Automatically switch between cooling and heating modes to keep your device within the ideal temperature range. The stable and reliable flames retardant plastic shell reaches V0 level and passes the EMC anti-interference test. Audible and visual alerts for high temperature and sensor failure issues..

Check Stock

lotmusic Digital Delay Electric Guitar Effects Pedal Mini Single Type DC 9V True Bypass

Integrated Noise Reduction: Developed with the code to reduce noise swells common with Digital Delay circuit, you get the quietest effect possible with this Digital Delay pedal..
Pure Signal:True bypass switching maintains pure signal flow when the Digital Delay pedal disengaged. Dedicated Time & Level &Repeat knobs allow for precise effect tailoring..
Solid Quality: The whole Digital Delay guitar pedal is made of aluminum alloy and classic, stable and strong. Aluminium alloy body makes this Digital Delay pedal safe to transport..
Easy Carry: Powered by a DC 9V adapter (not included in this package),this Digital Delay pedal has a small size body, light weight, suitable for out side gigs..
Lifetime Promise: Unbelievably inexpensive two-knob setup,it's obviously simple to use. For any problem with this Digital delay pedal, just contact us for a perfect solution, we are always here and help!.

Check Stock

UCTRONICS DC 12V Time Delay Relay Module with Plastic Enclosure, On Delay and Off Delay for Automobile, Raspberry Pi, Industrial Control, and Other Electronic Projects

Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V.
Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer..
Self Protection: Built with protection against reversal diode, supports anti-reverse protection. NOTE: Please remove the jumper cap of S5 when controlling AC current or DC current voltages other than 12V, otherwise the module will be burned or will not work properly..
Applications: This module works as a switch with time delay on and off function, highly recommended for automotive circuit modification, and LED lights, DC motors, pump and smart home control system..
You'll Be Getting: A time delay relay module U6031, 2 pieces of protective case and 2 mounting screws.
the plastics case keep the module free from dust and water, which is available for more applications than the separate module..

Check Stock

KETOTEK KT8230 Digital Temperature Controller Thermostat Regulator 120VAC 30A Fahrenheit -22~572℉ Heating Cooling for Incubator Brooder Refrigerator Fermenter Greenhouse Reptile

【Wide temperature range.】The range for KT8230 is -22~572℉, This is a relay temperature controller, There is no voltage output directly, you need to connect additional power supply for the load, then it can be set by differential (1~80℉) to turn on/off the load, it is like a switch..
【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range..
【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F～30.0°F calibrate the temperature when there is error..
【Safe protection.】Temperature Regulator will alarm when it exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low(LS) and high temperature limit(HS) to change the temperature range, LS < Setting Temperature < HS..
【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home.

Check Stock

KETOTEK Digital Temperature Controller AC110V 10A Fahrenheit Thermostat STC1000 with 2m Waterproof Sensor 2 Relays Heating Cooling

【2m Waterproof probe】Digital temperature controller 110V can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling heat mat, accelerating germination..
【Keep temperaure in desired range and guaranteed accuracy】It's on/off control mode. Turn on your device at a degree and turn it off at another degree. Fully utilize the stc microcontroller and NTC probe to have this temperature regulator has great accuracy: ±1°F, Temperature control range: -58~212°F, Power consumption: ≤3W, Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC)..
【Wirring heater and cooler at the same time】No more frequently change wirring between heater and cooler. This temperature regulator has 2 relays. Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time. (Please kindly note no outlets, wirring needed)..
【ABS plastic shell & compressor delay protection function】This incubator thermostat ac110V is made of ABS heavy-duty and anti-flamming plastic shell, designed with compressor delay protection, alarm when temperature exceeds temperature limit. All these promise the....

Check Stock

Dasiter 12V Voice-Activated Delay Switch Sound Audio Detection Time Delay Relay Module with 20cm Line Length Sound Sensor Module Voice Alarm

This voice-activated delay module requires a supply voltage of 12V..
Current: greater than or equal to 100mA..
Timing time: adjustable from 1-180 seconds, you can also customize the time range..
Shipping list: 1* voice-activated time delay relay module with 20cm line length audio detection sensor module..

Check Stock

Hilitand AD22B04 12V Signal Decoder 4 Channel DTMF Tone Relay Phone Remote Control PLC

【12V】Working voltage is DC 12V, you can easily find suitable power for this relay..
【reverse polarity protection.】This signal decoder relay ahs reverse polarity protection which can extend the service life..
【8 modes】8 modes of operation: Non-locking (Momentary ), self-locking (Toggle), inter-locking(Latch), 5/20/60/120/250-second delay..
【default control】The default control command is 1/2/3/4. Example: Dial 1 to control relay 1, dial 2 to control relay 2, dial 3 to control relay 3, dial 4 to control relay 4.
control commands can be changed any 1-4 bits. (For more details, refer to "AD22B04_4 channel DTMF controller commands setting manual ")..
【operating current】Standby 11-13 MA, 1 relay "open" 44MA, 2 relays "Open" 77MA, 3 relays "Open" 110MA, 4 relays"open" 140MA..

Check Stock

EarthQuaker Devices Avalanche Run V2 Stereo Reverb & Delay with Tap Tempo Guitar Effects Pedal

New custom-built enclosure, Flexi-Switch silent relay based switching for traditional latching or momentary operation, and updated reverb algorithm....
A dreamy sonic discovery device with up to 2 seconds of delay time and a lush reverb..
Features complete control over delay time, repeats, mix and voice (with the tone control), as well as control over the reverb length and mix.
It can run in one of 3 different modes to really play with your tone: Normal, Reverse and Swell.
Features an expression jack that can be assigned to one of six different controls using the 'EXP' selector switch.

Check Stock