ReviewsDin Rail Socket

OONO DIN Rail Mount 30A/300V 2x12 Position Screw Terminal Block Distribution Module.

  • DIN Rail mount 8 Channel 10Amp SPDT Power Relay Module, DC 5V Version..
  • JS1-5V-F Power Relays. LED indicator for each relay channel. Darlington transistors circuit driving relay, improve the reliability of action..
  • DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass dual layers PCB..
  • High quality terminal block: Pitch 5.0mm/0.197.
Check Stock

Electric Meter, KWh Meter, Single Phase 4P LED din Rail Electricity Power Consumption Wattmeter Energy Meter, 10-40A

  • 【DIN Rail Mounting】The energy monitor is small size, light weight, with good reliability and easy installation. 35mm standard DIN-rail mounting in accordance with standard DIN EN50022. Six widths (12.5mm modulus) in accordance with DIN43880..
  • 【5+1 LED Digital Display】Standard configuration 5+1(99999.1KWh) digital display. Double color LED of kilowatt meter indicates the power status (green) and the energy pulse signal (red)..
  • 【Easy to Contact】The standard configuration pulse output is passive (polar) and the remote pulse output can be selected as passive (non-polar). KWH meter is easy to contact with various AMR systems and conforms to the standards IEC 62053-31 and DIN43864..
  • 【One-way measurement】One-way measurement of single-phase two - wire active energy consumption. This has nothing to do with the direction of the load current. Comply with IEC 62053-21..
  • 【Two Wiring Methods】The din rail energy meter has direct connection operation, two wiring methods. Standard configuration S type wiring, U type wiring can be selected. Extend the terminal cover to protect th....
Check Stock

Electronics-Salon DIN Rail Mount 8 DPDT Signal Relay Interface Module. (Operating Voltage: DC 24V)

  • DIN Rail Mount 8 Channel DPDT Signal Relay Interface Module, DC 24V Version..
  • RYxxW-K high quality signal relays, LED indicator for each relay channel. Darlington transistors circuit driving relay, improve the reliability of action..
  • DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass dual layers PCB..
  • Pitch 3.81mm / 0.15" screw terminal block, wire range 26-16AWG, strip length 5mm / 0.2", Metric M2 slotted screw..
  • Datasheet: https://images-na.ssl-images-amazon.com/images/I/A1vg1+5HA8L.pdf.
Check Stock

10Pcs DIN Rail Mounted Ground Circuit Connection Terminal Block Screw Clamp Connector (USLKG5N)

  • Type: USLKG2. 5N, Rated voltage/current: 690V/34A..
  • ✯ Material: Nylon PA66 Housing + Alloy Copper Bodies + Nickel-plated Screws..
  • ✯ Installation Method: DIN Rail Mounted, universal mounting foot to easily mount onto DIN rail..
  • ✯ Lock firmly on the din rail, easy to insert the wire and the screw terminal holds the wires solid. Great use when making a prewired harness..
  • ✯ Application: Distribution boxes/cabinets and other general terminals, such as: home appliances, electronic circuits, machines, etc..
Check Stock

Electromagnetic Power Relay, 8-Pin 10 AMP 12V DC Relay Coil with Socket Base, LED Indicator, DPDT 2NO 2NC - MY2NJ [Applicable for DIN Rail System]

  • Fixing Mount Hole Size: 6 x 4mm/0.24" x 0.16"(L*W).
  • Total Size (Approx.):68 x 22 x 65mm/2.7" x 0.9" x 2.6"(L*W*H).
  • Package Content:1pc x Electromagnetic Relay.
Check Stock

ABN Black Aluminum SAE Socket Holder Rail 3-Piece Set – 1/4, 3/8, 1/2 Inch Socket Rails and 16 Clips Tool Organizer

  • STAY ORGANIZED: Use the ABN Black Aluminum Socket Rail Tool Socket Organizer Tray SAE 3-Piece Set – 1/4″, 3/8”, 1/2″ Inch Socket Holders Organizers and 16 Socket Clips to better organize your tool parts.
  • This socket set organizer accepts both shallow and deep sockets.
  • USE ANYWHERe: Use the 17-inch x 0.82-inch (43cm x 2cm) rails as socket organizers for toolboxes drawer to organize your toolbox, wall socket organizer as you mount on a wall vertically or horizontally, socket tray as you set it on your workbench, or tool drawer organizer as you store it in a drawer.
  • 1-inch x 0.2-inch (25mm x 5mm) keyhole slots to mount on any surface (hardware not included).
  • SAE standard 1/4-inch, 3/8-inch, 1/2-inch socket drives.
  • BUILT TO LAST: Tool socket holder rail constructed from aluminum with black finish for strength and longevity.
  • Socket clips constructed from heavy-duty plastic.
  • End caps constructed from soft plastic (caps removable).
  • Set holds up to 48 sockets (16 sockets per rail).
  • SECURE YOUR TOOLS: Spring-loaded ball bearings on each clip offer a firm and secure hold.
  • Your sockets attach to plastic clips which are friction fit to the aluminum rail.
  • The clips are held in place by soft plastic end caps that are also friction fit to the rail.
Check Stock

Baomain DDS238-4 （30-100）Single Phase DIN-Rail Kilowatt Hour kwh Meter 220V 100A

  • Rate Voltage:220V 230V 240V Rate Current:30(100A).
  • 220V Single Phase DIN-rail Kilowatt Hour kwh Meter.
  • Insulation Performance:AC voltage 2KV for 1 minute,impulse voltage 6KV.
  • Accuracy Class:Class 1 Starting Current:0.4%lb.
  • 35mm standard DIN rail installation,complying with standard DIN EN5002.
Check Stock

StarTech.com 1 Port RS232 to Ethernet IP Converter / Device Server - Aluminum - Serial over IP Device Server - Serial to IP Converter (NETRS2321P)

  • ACCESS YOUR SERIAL DEVICES REMOTELY: Use this RS232 to Ethernet IP converter to connect to, configure and remotely manage an RS232 serial device over an IP network.
  • DURABLE CONSTRUCTION: Built with a rugged aluminum housing, this serial to IP Ethernet device server delivers a reliable performance that can be used in almost any environment.
  • FLEXIBLE INSTALLATION: This serial to IP converter can be mounted to a surface or on a DIN rail with the built-in mounting bracket and included DIN rail clips.
  • Access a serial device from anywhere with an IP-based connection.
  • Mount on DIN-rails or on a wall with the attached mounting brackets.
  • Suitable for hash environments with a rugged, aluminum enclosure.
  • Configure via web browser or Virtual Com software interface.
  • Support for DHCP, HTTP, ICMP, ARP, IP, UDP, TCP.
Check Stock

50 Amp 4 Pole Contactor Normally Open (N/O) 120V Coil, 32A Motor, IEC 63A, 60A DIN

  • Normally Open (N.O.) main contacts Power status indicator.
  • 110/120VAC Coil: 52VA inrush, 10VA sealed.
  • Overall Size(Approx.) : 60 x 55 x 67mm / 2.4" x 2.2" x 2.7"(L*W*T).
  • DIN rail included, Compliance: CE, and IEC/EN61095 DIN.
Check Stock

CZH-Labs DIN Rail Mount 12V Passive 2 SPST-NO 30Amp Power Relay Module.

  • DIN Rail Mount Passive 2 Channel SPST-NO 30 Amp Power Relay Module..
  • High quality DIN rail mount carrier, can support width 35mm /32mm / 15mm rail..
Check Stock

CZH-LABS RPi Screw Terminal Block Breakout Module with Aluminum Enclosure for Raspberry Pi 1 2 3 Model B/B+

  • RPi Screw Terminal Block Breakout Module with Aluminum Enclosure. With the adapter module you can easily extend Raspberry-Pi projects to industrial....
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. Standard IDC40 pitch....
  • Support for Desktop, Panel mount, Wall-mount or DIN rail mount. DIN rail mount supports vertical or horizontal place mounting. Can support width 35mm....
  • Enclosure: High quality aluminum enclosure, thickness 1.5mm/0.06", with attractive and extremely durable powder coat painting and clear laser marking....
  • Packing list: 1x Terminal Block Board, 1x Aluminum enclosure(top and bottom covers), 2x DIN rail adapter Bracket, 4x Brass standoff, 5x M3x4mm Flat....
Check Stock