ReviewsDin Rail Terminal Block

CZH-LABS DIN Rail Mount 8 Amp Solid State Relay SSR Module in 4~32VDC Out 100~240VAC 8 Channels

  • MOC3043 Phototriac and BTA12-600B triac (the heatsink is electrically insulated)..
  • Input Action Voltage DC 3 to 32V. LED indication for each channel. Anti-reverse protection diode..
  • Output Load Voltage range AC 100 to 240V (50/60Hz). Maximum on-state average current: 8 Amp, maximum on-state current 12 Amp (< 10 seconds). Isolation: Phototriac. Zero cross: Yes..
  • Terminal Block: Wire range: 24 ~ 12 AWG / 2.5mm square. Strip length: 7mm. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass..
  • DIN rail mount, Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass PCB, dual copper layers..
Check Stock

Opto 22 SNAP-PAC-RCK16 - SNAP PAC 16-Module Mounting Rack

  • DIN Rail mount 30Amp 300V 2x12 position screw terminal block distribution module. Support for multiple module extension connections..
  • A / B position maximum current 30Amp(each position). A1~A12 total maximum current 30Amp(total positions). B1~B12 total maximum current 30Amp(total positions). A1~A12 / B1~B12 position maximum current 20Amp(each position). Maximum voltage 300V..
Check Stock

UOHGDPY DIN Rail Terminal Blocks,Universal Compact Wire Wiring Connector (40 pcs connectors+4 pcs Article in Parallel+4 pcs Digital Identification+2 pcs Fixed clamp+40 pcs Screw)

  • 【Easy to Use】The patented design, different from the ordinary rail connector, does not require the tedious tightening of screws, just insert the rail terminal into the 35mm iron and aluminum DIN rail, lift the orange clip, insert the wire into the hole until you feel the resistance, then lower the orange lever and complete the operation, saving 70% of the operation time..
  • 【Perfect DIN Rail Terminal Blocks Kit】Terminal blocks kit comes with 40pcs 12AWG terminal blocks, 4pcs connection bar, 4pcs digital identification, 2Pcs Fixed clamp,40pcs screws, 2pcs end stopper bracket and a transparent storage box..
  • 【Universal Compatibility】 This Wire Connector is suitable for solid and flexible wire. Connect any combination of solid, stranded, and flexible copper wires. Suit for solid wire 0.08-4.0mm² /28-12 AWG, flexible wire 0.5-2.5mm² /20-14 AWG. It is widely used in distribution boxes, control cabinets, switchgear, complete sets of equipment, machinery etc..
  • 【Premium Quality】Terminal blocks, high quality brass metal body and the best flame retardant insulating material modified nylon PA66 shell, it has a long life, no corrosion, anti-aging, 4KV and shock resistance, strong structure firmly locked to DIN rail..
Check Stock

CZH-LABS DIN Rail Mount 12 Amp Solid State Relay SSR Module in 4~32VDC Out 100~240VAC 1 Channel

  • MOC3043 Phototriac and BTA12-600B triac (the heatsink is electrically insulated)..
  • Input Action Voltage DC 3 to 32V. LED indication for each channel. Anti-reverse protection diode..
  • Output Load Voltage range AC 100 to 240V (50/60Hz). Maximum on-state average current: 12 Amp. Isolation: Phototriac. Zero cross: Yes..
  • Dual input terminal block, you can flexibility to configure the input control mode: Individual / Common Positive / Common Negative..
  • DIN rail mount, Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm....
Check Stock

GRAYHILL 70M-IAC5 I/O Module

  • 4 DPDT signal relay module. TAKAMISAWA RY24W-K high quality relays, switch contact material - gold overlay silver-palladium..
  • Darlington transistor circuits drive relay coil, LED indicator for each relay channel..
  • High quality screw terminal block. FR-4 fiber glass PCB, dual copper layers..
  • Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for panel mount use..
  • Datasheet: https://images-na.ssl-images-amazon.com/images/I/91Ml0Tph-rL.pdf.
Check Stock

Erayco E/UK DIN Rail Terminal Blocks End Stopper Bracket, End Stopper DIN Rail End Screw Clamp Terminal Fixing Block (Pack of 20)

  • E/UK Terminal Block End Bracket, Screw-type End Bracket.
  • Material: PA66 Nylon Plastic,Fire retardant, Flame retardant.
  • Product use: suitable for 35mm wide guide rail.
Check Stock

Electric Meter, KWh Meter, Single Phase 4P LED din Rail Electricity Power Consumption Wattmeter Energy Meter, 10-40A

  • ... This has nothing to do with the direction of the load current. Comply with IEC 62053-21..
  • 【Two Wiring Methods】The din rail energy meter has direct connection operation, two wiring methods. Standard configuration S type wiring, U type wiring can be selected. Extend the terminal cover to protect the use of the security..
Check Stock

WAGO 221 LEVER-NUTS 78pc Compact Splicing Wire Connector Assortment with Case. Includes (34x) 221-412, (26x) 221-413, (18x) 221-415

  • Safety and reliability: GKEEMARS terminal block is made from insulated material, which is flame-retardant, corrosion resistance, aging resistance, 4KV and shock resistance, strong structure firmly locked to DIN guide, long service life..
  • High efficiency: GKEEMARS lever wire quick connector instead of traditional electrical tape and electrical butt connectors twist-type, technological innovation reduces wiring time by 70%. Fast connections for different types and sizes of wiring or conductors..
  • Compatibility: GKEEMARS connectors can connect any combination of solid, stranded, and flexible copper wires, can be mounted on the DIN rail which simplifies the wiring progress. Suit for solid wire 0.2-4.0mm²/ 28-12 AWG, flexible wire 0.2-2.5mm²/ 28-14 AWG..
  • Practical and reusable: Every junction independent shrapnel, different wire managed separately, improving safety performance. Widely used in distribution boxes, control cabinets, switchgear, complete sets of equipment, machinery and home improvement..
  • Package content: 10 X Universal Compact Splicing Connectors..
Check Stock

Lantronix PXN210002-01U PremierWave XN Device Server 4 Port 10Mb/100Mb LAN, RS-232, USB 2.0, 802.11 b/a/g/n

  • Industrial device server with installable industrial protocols allow virtually any serial device to connect to a new or existing Ethernet network. Dimensions: 3.54"H x 1.4"W x 2.4"D..
  • High-impact plastic for durability. Media type supported: Twisted pair..
  • Connectivity: 10/100Base-TX Fast Ethernet, Data rates: 300 - 115200 bps, Characters: 7 or 8 data bits. Interfaces/ports: Network (RJ-45), RS-232/422/485 serial..
  • Form factor: DIN rail-mountable. Connector type: Terminal block (screw)..
Check Stock

WIWAV WDH-5GT-DC 10/100/1000Mbps Gigabit Unmanaged 5-Port Industrial Ethernet Switches with DIN Rail/Wall-Mount Fanless,-30℃~75℃

  • Compact 5-port Ethernet switch with 10/100/1000Mbps automatic MDI/MDI-X crossover for plug-and-play.
  • LOW POWER CONSUMPTION - Energy-Efficient Ethernet(Power Consumption .
  • FAST DATA TRANSMISSION: Each port supports both 10/100/1000Mbps speed auto negotiation, Supports IEEE 802.3, 802.3u, 802.3x standard.
  • ROBUST AND RELIABLE - can be used in extreme industrial environments.
  • Supports a wide range of operating temperatures -30°C ~ +75°C (-22F ~ 167F).
  • Easy to use and DIN rail mountable with built-in bracket,Robust IP30-rated housing.
Check Stock

WIWAV WDH-16ET2GF-DC 10/100Mbps Unmanaged 18-Port Industrial Ethernet Switches with DIN Rail/Wall-Mount Fanless,-30℃~75℃

  • Compact 18-port Ethernet switch with 10/100Mbps automatic MDI/MDI-X crossover for plug-and-play.
  • LOW POWER CONSUMPTION - Energy-Efficient Ethernet(Power Consumption .
  • FAST DATA TRANSMISSION: 16 Ports RJ45 +2 Ports SFP, Each port supports both 10/100Mbps or 1000Mbps speed auto negotiation.
  • ROBUST AND RELIABLE - can be used in extreme industrial environments.
  • Supports a wide range of operating temperatures -30°C ~ +75°C (-22F ~ 167F).
  • Easy to use and DIN rail mountable with built-in bracket,Robust IP30-rated housing.
Check Stock