ReviewsDiode Led Transistor Resistor

EEEEE 61 Values (Pack of 1095) 1% 0.25w Resistor Book kit, 1Ω-10MΩ RoHS Compliant for Arduino, Assorted resistors Set, Assortment ohm Pack (Ω, K, M)

This kit Includes 3638pcs of the most important and useful SMD 1206 0805 0603 Component. Would be a great gift for a family member or friend who tinkers with electronics..
1980PCS 1/4W 1% SMD Resistor. 960PCS 10pF-22uF SMD Capacitor, 300PCS SMD LED, 35PCS PCB board patch to in-line adapter board, 13PCS 3362P adjustable potentiometer, 280PCS SOT-23 Transistor, 70PCS SMA Diode..
100% compatible for Arduino UNO, MEGA, Raspberry Pi, PLC, Microcontroller..
All of electronics components are well packed and assorted in a re-use storage case, convenient to carry and use..
The product undergoes rigorous inspection before leaving the factory. If you are not satisfied with the product, please feel free to contact us and we will provide a full refund..

Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
-10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
- Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angle 2.54mm -5 * Capacitors for bypass tantalum 0.1uF -5 * Jumpers for header.

Check Stock

ICQUANZX LCR TC1 ESR Tester Transistor Inductance Capacitance Resistance ESR Meter

For detecting NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery, etc..
Can also be used to detect infrared wave forms..
After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form..
One button operation, automatically detect and shutdown, and you can also press the multi-functional button to close the detector..
Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly..

Check Stock

Multi-Function Tester 3.5 inch Colorful Display Pocketable Multifunctional TFT Backlight Transistor LCR-TC1 Tester for Diode Triode Capacitor Resistor Transistor LCR ESR NPN PNP MOSFET LW21

For detecting NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery, resistor and capacitor and other components, etc..
Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. ( Use 12864 liquid crystal display with green backlight)..
After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form..
Measurement results represent by TFT graphic display(160x128). Support Chinese and English..
One key operation, Auto Power Off(Timeout Settable). Can also press the multi-functional button to close the detector..

Check Stock

Multi-function Tester, Longruner 1.8 inch Colorful Display Pocketable Multifunctional TFT Backlight Transistor LCR-TC1 Tester for Diode Triode Capacitor Resistor Transistor LCR ESR NPN PNP MOSFET LW21

For detecting NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery, resistor and capacitor and other components, etc..
Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. ( Use 12864 liquid crystal display with green backlight)..
After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form..
Measurement results represent by TFT graphic display(160x128). Support Chinese and English..
One key operation, Auto Power Off(Timeout Settable). Can also press the multi-functional button to close the detector..

Check Stock

ACEIRMC LCR-TC1 Multi-Function Tester Colorful Display Pocketable Multifunctional TFT Backlight Transistor 1.8 inch for Diode Triode Capacitor Resistor Transistor LCR ESR NPN PNP MOSFET LCR-TC1

For detecting NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery, resistor and capacitor and other components, etc..
Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. ( Use 12864 liquid crystal display with green backlight)..
Measurement results represent by TFT graphic display(160x128). Support Chinese and English..
After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form..
One button operation, automatically detect and shutdown, and you can also press the multi-functional button to close the detector..

Check Stock

BJT Transistors Assortment Kit - 210 PNP and NPN Assorted Transistors with 1/4 W Metal Film Resistors - Bipolar Transistor Pack with 2N3904 2N3906 S8050 2N2907 S8550 2N2222 BC337 C1815 BC327 A1015

BJT Transistor Assortment Kit: It includes the most common PNP and NPN transistors: 2N3904, 2N3906, S8050, 2N2907, S8550, 2N2222, BC337, C1815, BC327, A1015.
Premium Assorted Transistors: With our 210 pcs bipolar transistor pack you will never have to worry about not having the right transistor for your circuit.
Bonus Resistor Kit Included: additional 250 pcs ¼ W, 1% tolerance, metal film resistor assortment kit that includes the most commonly used resistor values, always useful for your electronic circuits.
Durable Plastic Storage Box Included: It helps you to always keep the transistors organized and to transport the transistor kit anywhere - forget about the hassle of keeping the transistors in a bag.
Satisfaction Guarantee: Our transistors assortment pack is backed by our manufacturer 30-day money back guarantee.

Check Stock

B&K Precision 815 Hand-held Component Tester

3-1/2 digit extra large (0.8'' digit) high contrast LCD display.

Check Stock

Roykaw EZGO #70 Series Solenoid Relay with Resistor & Diode Kit for 36 Volt Golf Cart, 4 Terminal Continuous Duty, OEM # 27855G01 11761G1 27855G02 31680G1 3016, Upgrade Mount Bracket, Anti-Vibration

36 Volt Continuous Duty Solenoid fits all 1986-up E-Z-GO 36 Volt Electric Vehicles and Yamaha's Electric G2 Model only.Package also includes Resistor and Diode,No need to purchase separately.Voltage: 36VDC.
Continuous Working Current: Less than 80Amp.
Contact Studs: 5/16 -24 Studs Standard & Long.
Mounting Holes: 5/16 x 19/32 2-13/64 on Center..
Function：4 Terminal Heavy-duty Solenoid play a role as a conduit between the golf car battery and the starter generator, providing the electrical power necessary to activate the vehicle's ignition system..
EZGO Electric Golf Car Relay replaces OEM part number:70-120224, 3016, 11761-G1, 27855-G01, 27855-G02, 31680-G1, Cole Hersee 24080, E-Z-Go 11761GA. Solenoid Resistor replaces OEM part number:21764-G1；Solenoid Diode replaces OEM part number:30353-G1..
Package includes:1*36 Volt Continuous Duty Solenoid, 1*Solenoid Resistor,1*Solenoid Diode..
Make sure your little diode is oriented correctly and the wire is pointing towards the positive side.If there is a problem with item, you will get replacement or refund. You will have best ever experience with us..

Check Stock

boeray Lawn Mower Spindle for MTD 918-05078 618-05078 ST-S46 Cub Cadet RZT-S46 CP 30-8024 Stens 285-167 80-11-798

▶►▷【MULTIFUNCTIONAL TEST】: Micro-controller using 8MHz external crystal, better measurement accuracy. Automatically detect NPN, PNP bipolar transistors, N-channel and P-channel MOS FET, JFET, diodes, dual diode, thyristor small power unidirectional and bidirectional thyristor..
▶►▷【AUTO SHUT-DOWN FUNCTION】: Our advanced electronic transistor tester with automatic shutdown and manual shut-down function.use accessories, more convenient and efficient to complete your project. One button operation, automatic shutdown with only 20nA shutdown current..
▶►▷【STABLE PERFORMANCE】: Forward voltage drop measurements of diodes, LEDs and transistor base-emitter junctions. Can be in correct order and the diode symbol display two diodes, and gives the diode forward voltage. Each test takes about two seconds, with only large capacitors and inductance measurements taking longer..
▶►▷【FINE WORKMANSHIP】: Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. Fine workmanship and good performance. Durable and easy to use..
▶►▷【WARRANTY & GUARANTEE】: 6 month extended warranty and 24/7 friend....

Check Stock

Lighthouse LEDs 12v 3mm Flat Top Pre-Wired Amber/Orange LED - Ultra Bright (10v, 11v, 12v, 13v, 14v, 15v) (Pack of 20)

12v 3mm Flat Top Pre-Wired Amber / Orange LED - Ultra Bright (10v, 11v, 12v, 13v, 14v, 15v) (Ships from US).
Size: 12v Pre-Wired 3mm Flat Top Wide Angle LED, Color: Orange/Amber, Luminosity: 8,000-9,000 mcd.
Forward Voltage: 10v-15v (volts) (15v Not Recommended Continuous), Current: 20mA, Wavelength: 600-610nm, Operating Voltage 10v-15v (volts) (15v Not Recommended Continuous), Wire Length: Approximately 15cm (6 inches).
Viewing Angle: 105-115 Degrees, MountStyle: Custom, Lens Color: Clear, Resistor Built In: Yes, Additional Resistor Required: No, Shrink Wrap: Yes, Mount Style: Custom.
Super bright LEDs, used for mods, RC, adruino, cars, HO Scale models, planes, trucks, adafruit projects, halloween, christmas, PC, Ultra Light, Pre-Soldered Leads, solder, litz, micro, diode, nano, pico, milli.

Check Stock