ReviewsDiode Wire

UT136B Multimeter Resistance Tester Voltmeter Digital Ohmmeter Voltage Tester Measures Current, Resistance, Frequency; Tests Diodes, Temperature

• 【Diode Tester】Our diode Test meter maximum display 3999, support diode and triode test function, support NCV function.
• 【Auto Range 】UT136B+ automatic range digital multimeter with capacitor and frequency for easy operation.
• 【Safety Operation】Safety level CAT II 1000V, CAT II 600V, passed the 1m drop test. Voltmeter can measure AC and DC voltages up to 1000V and can measure currents up to 10A (20A at 30S measurement time).
• 【Protection】Full featured mis test protection, can withstand 1kV voltage shock, and is more convenient to use.
• 【Multifunction Test】Support on off test, data hold, auto power off, low voltage display and screen backlight.

AOICRIE 4PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino

• L298N as Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects, Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
• Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient, To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
• Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled..
• Easy to Use No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use..
• Wide Usage Great for DIY Smart Car Robot Power MEGA R3 for Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits..

Nilight 2.5Inch Oval Side Marker Light 10PCS Amber 2 Diode LED Trailer Clearance Light Fender Light Waterproof Surface Mounted for 10-30V Truck Camper Boat Lorry, 2 Years Warranty

• Awesome Brightness: Each light is equipped with 2 durable diode LEDs. Output super bright amber light, with better heat dissipation and wider lighting angle..
• Surface Mount & 2-Wire Design: Simple installation only requires drilling three holes, pass the wire through the middle hole, then fix the two sides of light with screws. 7.87inch 2-wire leads with black for ground/negative while yellow for positive..
• Highly Sealed: Decently sealed at both front lens and back wire lead. Compared with others, our back wire leads add strong glue to completely seal them without affecting the surface installation..
• Featured Functions: Used as LED front rear side marker light clearance light indicator light fender light on 10-30V Truck Pickups Trailer SUV Van Caravan Boat Lorry Bus etc..
• Package Includes: 10pcs amber side marker light, each light comes with 2 screws..

Lights88 532nm Green Laser Module Diode Laser Beam Driver(5mw Green Dot Laser Module)

• 100mW Module: This is a 100mW module that can emit a 405nm blue-violet ..
• Adjustable focus design: dot diode module adopts adjustable focus design.In other words, the spot size of this dot diode module is adjustable..
• High Reliability Material: This dot diode module is made of durable copper shell for long life..
• Continuous output: This dot diode module supports continuous output and can be used for a long time..
• Application: This dot diode module is designed for engraving machine, cutter and so on..

Partsam 4x Waterproof Amber/Red 4LED Side Marker Light for Trailer Truck Boat DC12V - Slim Waist

• Sealed, Long LED Trailer Clearance and Side Marker Light, 4-Diode - Amber/Red.
• This thin-line, sealed, rectangular LED light can be used as a clearance or side marker light.
• The two-wire design includes the lead and ground wires to mount to any surface..
• Hole to Hole Size:2.2" Note: NOT the TWO PRONG type, these are hardwired into the vehicle(Black is negative and Red positive).

Quarton Laser Module VLM-650-03 LPA (ECONOMICAL DOT Laser)

SMD Meter Capacitance Diode Resistance Measuring Instrument Handheld Resistance Capacitance Tester for Electrician with Diode Test 1.5V

• 【SPECIAL MEASURING】This meter is specially used to measure SMD(surface mounted device).
• 【WIDELY APLLICATION】This HP-990B handheld diode meter is suitable for agricultural, home appliance, industrial and office use..
• 【AUTOMATICALLY DIODE】This handheld diode meter will be off automatically after 15minutes when there is no operation..
• 【LARGE LCD DISPLAY】This HP-990B handheld diode meter is with large LCD make you read easily..
• 【UNIQUE HANDHELD DESIGN】This HP-990B handheld diode meter is handheld design, easy to grip and use..

DC 3-5V 405nm 100mW Mini Dot Diode Module Head Adjustable Focus Blue Violet Diode Module Micro Tube

• 100mW Module: This is a 100mW module that can emit a 405nm blue-violet ..
• Adjustable focus design: dot diode module adopts adjustable focus design.In other words, the spot size of this dot diode module is adjustable..
• High Reliability Material: This dot diode module is made of durable copper shell for long life..
• Continuous output: This dot diode module supports continuous output and can be used for a long time..
• Application: This dot diode module is designed for engraving machine, cutter and so on..

Perterson V170A Piranha Amber LED Clearance/Side Marker Light with Reflex (3001.7272)

• 2-diode LED light that functions as clearance or side marker light.
• LED Alternative to traditional incandescent 114-Series light.
• Two mounting options: use center stud or two mounting screws.

Oyviny Universal Diode Wiring Kit with 4 Diodes for Dinghy Towing, Towed-Vehicle RV Wiring Harness

• Trailer Diode Wiring Kit. This universal tow car wiring kit use a diodes system to wire the towed vehicle's brake lights, running lights and turn signal lights to your RV electrical system. Diodes protect both vehicle's electrical system from electrical feedback.
• Towed-vehicle wiring harness kit is ideal solution to connecting your vehicle's electrical system to your RV while dinghy towing, allows your car using the existing light system, you don’t need to carry a set of spare magnetic tow lights any more!.
• Widely Used. Dinghy trailer wiring harness can be wired to most vehicle, universal kit works with 2-wire(combined system) and 3-wire(separated system) lighting systems. For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn lights. A converter(RM-732) is required if you want to separate it.
• Easy to Install. RV dinghy towing wiring comes with step-by-step installation instructions to help easy installation, simply wire the towed vehicle and attached the diodes, wire the motorhome and connect the power cord to the motorhome and towed vehicle.

Partsam Set RED AMBER LED Trailer Fender Bullet 3/4" Led Clearance Marker Light Left Right

• Partsam SET(RIGHT&LEFT) Bright Red and Amber LED Trailer Fender Marker Lights.
• Pre-wired assembly mounts on top or side of fender.
• Pre-wired fender light assembly mounts on top or side of your fender to mark the widest point on your trailer. The bracket has 1 amber front clearance light and 1 red rear clearance light. For trailers over 80" wide. Sealed, waterproof lenses..
• Amber LED light points toward front of trailer to act as front clearance light.
• Red LED light faces rearward to act as rear clearance light.
• 2-Wire design - includes ground wire and lead wire for power(Black is positive and White is negative).
• Installs on left fender (driver's side) of trailer & right fender (passenger's side) of trailer, NO SCREWS INCLUDED.
• LED Fender Lamps utilizing low profile single-diode LED lamps mounted into an equally low profile housing these lamps are durable, attractive and inexpensive.The LED lights are 3/4" Round. Housing dimensions: please check the pictures in the listing.