ReviewsDipped Galvanized Steel Sheet

3-1/2 Exterior Hot Dipped Galvanized Common Framing Nail 16d Full Box ~2350 Nails

3-1/2" (16d) Exterior Hot Dipped Galvanized Common Framing Nail for General Construction Purposes.
Hot Dipped Galvanized to Prevent Corrosion and Rusting - Smooth Shank - 8 Gauge (0.165).
Common Nails are Able to Carry More Load than Box Nails Due to Heavier Shank Size.
Durable HD Coated For Outdoor Use, Pressure Treated Wood, Construction, Carpentry and Framing.
Our Galvanized Common Nails conform to ASTM F1667 Standards.

Check Stock

(4) Hot Dipped Galvanized Dipped Square U-Bolts (1/2\ D x 2 1/16\ W x 6 5/16\ L) for Boat Trailer

U-bolt Size: 1/2" D x 2-1/16" W x 6-5/16 L, thread length: 2-1/2" inches, suitable for 2" x 2" square beams and shafts, (order Please check the measurement size carefully before).
Hot Dipped Galvanized : U-bolts are made of Hot Dipped Galvanized，The white surface is a thick galvanized layer, which enhances the rust and corrosion resistance of the U-bolt..
You can get: (4) U-bolts, (8) hexagon nuts, (8) flat washers, (8) lock washers, these additional accessories are also Hot Dipped Galvanized. With these, you can spend less time repairing and more time boating.
Tips:Use a hand wrench or socket ratchet when installing the nut. Do not use high-speed power tools or impact tools to tighten the nuts..
After-sales service: Our U-bolts provide a one-year warranty service. Please rest assured, if you have any questions, please feel free to send us an email via Amazon. We will solve it for you within 24 hours..

Check Stock

Brite Zinc Cold Galv - wa b-100 bright galv 12.5 oz [Set of 12]

A glistening coating with 65% pure zinc in dry film.
Stops rust and corrosion on any iron or steel surface for protection equal to or better than hot-dipped galvanizing.
Restores galvanized surfaces to the bright look of hot-dipped galvanizing.
Meets performance requirements of ASTM A-780-93A.
Good film integrity after 336 hours salt spray (ASTM B-117).

Check Stock

Crown 7008 Metallic ASTM A-780, ASTM B-117 Bright Premium Galvanize Coating, 13 oz (Pack of 12)

A glistening coating with 65 percent pure zinc in dry film.
Stops rust and corrosion on any iron or steel surface for protection equal to or better than hot-dipped galvanizing.
Restores galvanized surfaces to the bright look of hot-dipped galvanizing.
Good film integrity after 500 hours salt spray.

Check Stock

Worth Garden Galvanized Powder-Coated Steel Planter, Indoor Outdoor Rectangle Planter, Metal Planter for Gardening Patio Living Room Courtyard, Tall Flower Plant Pot. (30In, Black with Leaves Pattern)

【METAL PLANT BOX】Our black flower pots are made of galvanized steel, the surface is wear-resistant, scratch-resistant, corrosion-resistant, and has a bright surface, long service life, and you don't have to worry about rain corroding the surface of this pot. Ideal for industrial or residentia use..
【PERFECT DECORATION】 You can place the galvanized flowerpot anywhere you want to decorate, such as outdoor (terrace, balcony, front or backyard), you can grow flowers, herbs, etc. The flowerpot has a built-in removable galvanized sheet with two drainage holes, it is easy to drain and can provide a good growing environment for your plants. You can also put it indoors and it will provide a unique visual treat to your bedroom..
【SURPRISING A FEATURE】 We have made the galvanized steel planter unique hollow leaves pattern design, which can make your galvanized steel planter more integrated into nature. Let the galvanized steel planter add more beauty to your life..
【WHAT WILL YOU GET? 】 In addition to the Galvanized Steel Planter (12"D x 12"W x 30"H) , you will get: galvanized steel sheet with 2 Drainage Holes，8 x Nuts & Bolts, 1 x Screwdriver, 1 x Gloves(Pair)..
【EASY ASSEMBLY】Our galvanized steel planter extremely easy to assemble, asse....

Check Stock

Square U-Bolt Zn3/8x4x7

SIZE: 1/2" D x 3 -1/16" W x 3-5/16" L (Exactly AS Pictured).
CONTENTS: (4) U-bolts with (8) each flat washers, lock washers, and Heavy Hex Head Nuts (ALL hot dipped galvanized).

Check Stock

hannger 1/4 Galvanized Steel Aircraft Cable, 100FT Zipline Cable Wire Rope, 7x19 Strand 4200 lbs Breaking Strength for Backyard Zipline Course, Deck Railing, String Lights, Dog Run

ZIPLINE KITS PACKING LIST: 1x 100ft 1/4" steel cable with Thimble, 1x 6ft 1/4" hot-dip galvanized wire rope, 1x 3/8" Hot Dipped Galvanized Turnbuckle, 1x Thimble, 4 x Clip..
7x19 GALVANIZED CABLE: 1/4 wire rope diameter, made by 7x19 strands construction core, very flexible to use. This Galvanized Steel Aircraft Cable Wire has a Safe Working Load (SWL) of 1400 lbs (635 kg). Its breaking strength is 5 times the SWL (design factor 5:1)..
HIGH QUALITY MATERIAL: 1/4" galvanized steel cable surface is hot-dip galvanized for superiority Strength, flexibility, corrosion resistance, the surface is polished to form a smooth surface without burrs. Equipped with hot-dip galvanized turn buckle, 6ft cable, clip and thimble, installation is very convenient..
MULTI-APPLICATION: The wire rope cable length can be cut as needed, making it ideal for both indoor and outdoor use. Typically used for zip lines for kids, zipline cable, string lights , garden wire cable, straightening trees, dog zipline systems, winches..
AFTER-SALE SERVICE: We make sure that each of our products are pr....

Check Stock

10 Inch to 9 Inch Single Wall HVAC Duct Reducer & Increaser - Galvanized Sheet Metal Ducting Connector for Airflow, Heating, Cooling, & Air Ventilation System Extra Strength and Fittings

D______ ______________ & __________________: Sheet metal HVAC Duct Reducer for flexible or metal HVAC Ducts and air vents. Used to connect two air ducts of different diameters to create a seamless ventilation. Sturdy steel ducting is perfect for DIY and Trade use. Our HVAC Duct Reducer & Increaser Galvanized Metal for Longer Lasting Quality. Galvanized pipe to be used for gas heating, ventilation and air conditioning only. Not to be used for solid fuel venting and Non-Crimped Ends..
________-______________ __________ __________: Our sheet metal reducers and increasers are manufactured from the highest quality of galvanized steel. These reducers are made of galvanized sheet metal. Perfect for use with either flexible duct or rigid sheet metal duct. Never be restricted to your air conditioner's ducting requirements again. Single Wall Galvanized Metal reducer for Duct / pipe reducing. Great for professionals and Homeowners. Metal is easy to drill with Self Drilling Screws..
__________ ________________ ______ ________________: These galvanized duct reducers / Increaser can be used with fans, ducting, air-cooled hoods, and ventilation systems, that allowing you to lengthen and extend your ducting. They are the perfect sheet metal fitting for changing duct s....

Check Stock

Turnbuckle Hook, 3/8 x 6\ Hot Dipped Galvanized Steel Jaw and Jaw Turnbuckle, 1190 lbs Working Load Limit, Heavy Duty Turnbuckles - Durable, Weather Resistant

【Long-Lasting】Our Galvanized Turnbuckles uses hot dipped galvanization to protect the steel from humidity, corrosion, and other elements. Suitable for outdoor applications.No other kind of protective coating can give this much longeviy to steel, so you’re sure to use our turnbuckle for years.
【Safety Tested】Safety is our top priority. All of our products, including this galvanized steel turnbuckle, have passed EN71 test, CE and RoHS safety tests.Our Galvanized Turnbuckles have a strong construction and a galvanized finish that resists rust and corrosion.
【Comes With Nuts and Bolts】This jaw and jaw turnbuckle comes with nuts and bolts that are made of the same durable hot tipped galvanized steel.Features a jaw on each end which is fitted with a nut and bolt or a pin & cotter pin assembly.
【Multi-Application】This galvanized turnbuckle has a body opening that measures 18 inches, and a working load limit of 1190lbs. You can use this to tension a zipline, fix a seat, straighten a tree, create a gate for your hunting cabin, or at home.Ideal for marine and industrial use.Can also be used for recreational activities like zip lining.The list goes on!.
【Lifetime Warranty】We make sure that all the products we put out are of the best quality an....

Check Stock

Extreme Max 3006.6572 BoatTector Galvanized Steel Anchor Lead Chain - 5/16" x 5' with 3/8" Shackles

5/16" x 5' galvanized steel anchor lead chain.
Working Load Limit: 2,000 lbs./Breaking Strength: 8,000 lbs..
Lead chains enhance anchor holding power and limits abrasion between the anchor and anchor line.

Check Stock

Five Oceans FO4525 Marine Boat Windlass Anchor Rode Nylon Three Strand 5/8 inches x 250 Feet with 3/8 inches x 20 Feet Calibrated Hot-Dipped Galvanized HT G4 Chain, with Stainless Steel Shackle

Five Oceans Windlasses Anchor Rodes are assembled by professionals in the USA and are the best option for your anchoring system when you have a windlass onboard.
Composed of 5/8-inch 100% Nylon rope, ideal for anchoring systems, and spliced to 3/8 inches calibrated hot-dipped galvanized steel HT G4 chain.
Ideal for use with windlasses, tapered spliced for a smooth rope to chain transition, with a High Test G4 Galvanized Steel Chain.
Rope: 250 feet (77m) x 5/8 inches (15mm) Nylon three-strand anchor rope. Chain: 20 feet (6m) x 3/8-inch (9 mm) HT G4 galvanized steel chain. Screw Pin D Shackle: 3/8 inches Stainless Steel.

Check Stock