ReviewsDirect Current

UNI-T MSO3000E Series Digital Oscilloscopes 150MHZ 2CH, 50MHz Built-in Waveform Generator

  • Product 1: UNI-T Arbitrary Waveform Generator UTG932. Dual channels. Ch1 - Ch2 combining. Output waveforms: Sine, square, pulse, ramp, noise, DC, arbitrary. Modulation types: AM, FM, PM, FSK, Line, Log. 24 groups non-volatile arbitrary waveform storage..
  • Product 1: Sampling rate of 200MSa/S. TTL level signal compatible 6 digits high accuracy built-in frequency counter. Output frequency range: 1μHz-30MHz. Full-band resolution of 1μHz. DDS (direct digital synthesis) method applied. 14 bits vertical resolution. Support frequency scanning and output..
  • Product 2: Quiet & Easy to use. Single output. 4 digits EBTN LCD display. 3 groups of one-key recall of stored data. Independent output switch. A low-noise power supply that is easily viewable from any angle..
  • Product 2: Accurate. Output regulate resolution: 10mV (constant voltage) / 1mA (constant current). Adjustable voltage (0-32V). Output current 0-6.0A. Input voltage: 110V AC/220V AC, 50Hz~60Hz..
  • UNI-T WARRANTY – A trouble-free experience with 100% 18-MONTH WARRANTY and 100% MONEY BACK GUARANTEE by UNI-T Direct!.
Check Stock

NOYITO ACS758LCB-050B-PFF-T Linear Current Sensor Hall Current Module

  • This product is a current detection module, mainly using the ACS758-LCB current sensor. The ACS758 consists of a precision, low-offset linear Hall sensor circuit with a copper current path close to the wafer. The current applied through the copper current path is capable of generating a magnetic field that can be induced by the integrated Hall IC and converted to a proportional voltage.003cbr003e.
  • Device accuracy is optimized by placing the magnetic signal close to the Hall sensor. The accurate, proportional output voltage is provided by a stable chopper-type, low-bias BiCMOS Hall IC that is factory-precisely programmed.003cbr003e.
  • The internal resistance of this conduction path is typically 100 μΩ with low power loss. The thickness of the copper wire allows the device to operate under high overcurrent conditions. The terminals of the conduction path are electrically isolated from the sensor pins (pins 1 to 3). In this way, the ACS758 sensor IC family can be used in applications that require electrical insulation without the use of opto-insulators or other expensive insulation techniques.003cbr003e.
  • Perform RC filtering on the output and use the op amp to build a voltage follower circuit to make the output more stable and better match the impedance of....
Check Stock

Veris,Current Switch,SolidCore,Fxd,N.O,250V, H800-HV

  • Hawkeye 800 go/no go current switches provide a cost-effective solution for monitoring status on unit vents, exhaust fans, recirculation pumps, and other fixed loads where belt loss is not a concern.
  • APPLICATIONS Monitoring on/off status of electrical loads Monitoring direct-drive units, exhaust fans, and other fixed loads Verifying lighting run times On/off status for direct-drive fans, pumps, and process motors More reliable for status than relays across auxiliary contacts Ideal for direct-drive units, unit vents, fan coil units, exhaust fans, and other fixed loads Great for lighting status less expensive than 277V relays Removable mounting bracket provides installation flexibility.
  • saves valuable panel space100% solid-state, no moving parts to failPolarity insensitive output5-year limited warranty.
Check Stock

Miniature Current Switch,Current Sensing Switch,with Rails,Normally Open Amp Sensor Monitoring Relay AC 0-30A Detectable（M3050）

  • Multi-Purpose: M3050 AC with rails current sensing switch is specially designed and manufactured to solve AC current monitoring. It uses the principle of mutual inductance to sense AC direct current, isolate the AC current, output normally open or normally closed switch signals, and directly control various automated industrial equipment, such as flash lamps, buzzers, relays, microcontrollers or other power load equipment..
  • Upgrade: Compared with traditional transformers, thermal protectors and other devices, using this device can not only get more accurate and timely control, but also greatly simplify the design and reduce costs. Self-powered, no external power supply required. Input through current: 0-30A AC Rated load: [email protected] AC/DC..
  • High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V..
  • LED Indication: The action current is 0-30A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch..
Check Stock

Reboot TIG Welder AC/DC Aluminum Welding Machine with Pulse Foot Pedal 200A Full Digital Control 110/220V High Frequency TIG ARC 2 in 1 Stick Welding Machine

  • AC/DC TIG Welding(pulse)--alternating current (AC) and direct current (DC). Welding of almost all metals, such as steel, stainless steel, aluminum,....
  • 2T/4T (TIG)--determines the control of the operating mode and offers extended control over the current flow. In 2T mode, the high-frequency ignition....
  • TIG Aluminum Welder--10-200AMP AC/DC TIG Electric Current Output.
  • Quality TIG welding on Aluminum, Cast Iron, low hydrogen , Stainless or Steel and....
  • Equipped with a footswitch, welding is more convenient, anytime, anywhere, free welding!（30A breaker suggested for 220V, 50A breaker suggested for....
  • 3 year’s warranty provided,please contact us for any assistance.We will take each and every action to prevent you from bearing any loss at Amazon as....
Check Stock

TitanShield Current/Modern Size Resealable Comic Book Bags (150 Count)

  • VALUE PACK: 150 premium quality comic book bags for current/modern comics..
  • PERFECT FIT: Sized to fit current comics from 1970s to modern day..
  • ARCHIVAL GRADE: Protect your comics with TitanShield's comic book bags, made from 2 MIL virgin polypropylene material that is acid free and non PVC..
  • 7 CENTS PER BAG: 50% more than the leading competitor. Exceptional price to value. We achieve this by selling only in value packs, direct to consumer with no intermediary markups..
  • RESEALABLE FLAP: Each bag is resealable so you don't need to reach for extra tape..
Check Stock

Current Sensing Switch/Relay,AC Current Sensing Switch 0-200A Normally Open Current Sensor Monitoring Relay,Linkage PLC Signal,Overload Controller M3080）

  • Multi-Purpose: M3080 AC current sensing switch is specially designed and manufactured to solve AC current monitoring. It uses the principle of mutual inductance to sense AC direct current, isolate the AC current, output normally open or normally closed switch signals, and directly control various automated industrial equipment, such as flash lamps, buzzers, relays, microcontrollers or other power load equipment..
  • Upgrade: Compared with traditional transformers, thermal protectors and other devices, using this device can not only get more accurate and timely control, but also greatly simplify the design and reduce costs. Self-powered, no external power supply required. Input through current: 0-200A AC Rated load: [email protected] AC/DC..
  • High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V..
  • LED Indication: The action current is 0-200A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch..
  • ABS material: High-power MOS tube non-con....
Check Stock

200A High Precision Power Analyzer Watt Meter Battery Consumption Performance Monitor with LCD Backlight for RC, Battery, Solar, Wind Power

  • 【REAL-TIME READING】200A high precision power analyzer convenient to calculate the voltage, current, power, discharge amount and discharge time of the aircraft, and calculate the force effect of the multi-axis aircraft. Predict model airplane flight time,Choose the best propeller/most efficient motor..
  • 【HIGH PRECISION】Current: 0-200A, continuous current 50A, resolution 0.01A. Operates from 4.8-60V (When the test voltage is lower than 5v, a separate 12v power supply is required to power the power meter), resolution 0.01V. Measures 0-6554Wh, resolution 0.01Wh. The current can determine the battery capacity, the continuous current can determine the discharge time, and the maximum instantaneous current can determine the internal structure of the battery to protect circuit..
  • 【MULTI-FUNCTIONAL】Watt meter power analyzer can verify sufficient operating voltage under load and prevent peak currents damaging battery, motor control, motors, wiring and connectors.
  • Verify correct battery charger operation (connect your battery and charger).
  • Set the cut-off voltage and check the battery capacity.
  • Detect the receiver and the actual operating current to determine whether UBEC, etc..
  • 【BACKLIT LCD SCREEN】Watt meter comes with a 16 * 2 backlit LCD screen, so....
Check Stock

LIGHTENING DARK H10 9145 9140 LED Fog Light Bulb/DRL 5530 Chips 800 Lumens 6000K Cool White Contains 2 Bulbs

  • BULB FIT: Replacement for H10, 9145, 9140 bulb size. A direct fit for fog light and daytime running light (DRL) applications. We don't recommend using....
  • PERFECT COLOR MATCH: Custom 5530 LED chips, lumens up to 800LM, cool white color temp of 6,000K gives you a better visibility in foggy situations with....
  • IC CURRENT DRIVE: Built with constant-current circuitry, the intelligent IC current drive controls the LED work process humanly. No worry of any....
  • MORE LIFETIME: Made of high quality aviation aluminum, with much better heat conductivity and dissipation. This ensures constant cooling of the LED,....
  • PLUG-N-PLAY: The LED fog light bulbs (or daytime running light) match most vehicles' OEM sockets. Easy plug and play installation without modifying....
Check Stock

Major Brands 27C010-12 EPROM Pin, 5V, 128K x 8, DIP-32, 120 Nanoseconds (Pack of 2)

  • The CD4081BE AND gates, provide the system designer with direct implementation of the AND function and supplement the existing family of CMOS gates..
  • 100% tested for quiescent current at 20 V, Medium-Speed Operation - tPLH, tPHL = 60 ns (typ.) at VDD = 10 V.
  • Maximum input current of 1 µA at 18 V over full package-temperature range.
  • Standardized, symmetrical output characteristics.
Check Stock

BTS GQ KOREA 2022 January BTS Coverman GQ_Group

  • Direct replacement parts. This K-0650 Cylinder and Piston Ring Replacement kit will fit both the single cylinder oil-free pumps and the twin cylinder....
  • It is recommended on Twin Cylinder Air Compressor Pumps that both cylinder sleeves and piston rings be replaced at the same time so that the air....
  • This K-0650 is the most current direct replacement part and has the newest style D25837 coated cylinder sleeve..
  • The K-0650 approximate cylinder dimensions are as follows: Inside Diameter:2.365" Outside Diameter:2.495" Outside Shoulder:2.945" Total Height:1.980".
  • Please check the compatibility before ordering.
Check Stock