ReviewsDirect Drive Motors

HiLetgo L298P DC Motor Drive Module L298P DC Motor Drive Shield H-Bridge Drive Expansion Board High-Power DC Stepper Motor Controller for Arduino

  • Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input..
  • The L298P shield DC motor driver has PWM speed control mode.
  • Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A..
  • Stack design can be directly plugged into the Arduino, easier to use..
Check Stock

AOICRIE 4PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino

  • L298N as Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects, Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient, To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled..
  • Easy to Use No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use..
  • Wide Usage Great for DIY Smart Car Robot Power MEGA R3 for Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits..
Check Stock

Official Creality Sprite Direct Drive Extruder Pro Kit with 80N Stepper Motor Direct Drive Upgrade Kit for Ender 3 Ender3v2 Ender 3 pro Ender 3 Max Support 1.75MM Filament

  • Compatible With Ender3 Series - Creality Spirit direct drive extruder upgrade kit compatible with Ender 3, Ender3v2, Ender 3 pro and Ender 3 Max..
  • All Metal Design - With Compact and light weight design, 54x50x64.3mm small size, 288g weight. Creality Spirit direct drive extruder pro kit perfectly....
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N....
  • Dual Gear Feeding, More Stable Printing -The Creality Sprite direct drive extruder adapt double-toothed structure which does not damage filaments,....
  • Support Printing Flexible and High Temperature Filament - With direct drive extruder and up to 300°C all metal hotend kit, the Spirit direct drive....
Check Stock

sopbost 2023 Kids Ride On Car 24V Battery Powered 4 Wheeler 2x2/4x4 Motorized Ride On UTV with Parent Remote Ride On Toys, 4 Spring Absorbers, Red

  • 24V 4x4 Single Seater Kids UTV: This 24V battery powered kids ride on UTV is designed for kids aged 3-8, 4pcs 35W drive motors and EVA rubber tires wheels make it easily to ride on different terrains. What’s more, you can switch the driven mode between the 2-wheel drive (2x2) and 4-wheel drive (4x4) according to driving needs..
  • Kids Driving & Parental Control: The ride-on toy car with 2.4GHz parental remote control lets your kids drive the car manually, and parents can also operate this toy car via the remote control. Two driving modes design can improve the safety while kids driving and avoid potential danger..
  • sopbost Newest Kids Off-Road Vehicle: Key start, adjustable seatbelt, bright LED lights, double lockable doors, powerful four driving force, high chassis design & EVA rubber explosion-proof wheels, newest off-road appearance design. Your kids can drive on various of rough terrains and get a great driving experience..
  • Kids Electric Vehicle with Music Play: This ride-on truck provides device connection functions (USB/Wireless Connection), you can connect your devices to the toy car to play your kids' fa....
Check Stock

Minn Kota 2774725 V2 Bulk Powerdrive Corded Foot Pedal

  • New Style Minn Kota Model 2994727 Power Drive V2 Replacement Corded Foot Pedal.
  • It will only work with Minn Kota Power Drive V2 (Version 2) bow mount trolling motor manufactured from 2007 to 2016.
  • It will not fit the older Power Drive motors that have a flat push together plug.
Check Stock

MKS GEN L V1.0 Controller Board 3D Printer Kit Mainboard Ramps1.4 Dual Extruder Touch for 3D Printer Accessories

  • Support a Variety of Stepper Drivers -- 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like..
  • Reserve External Driver Signal -- available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t..
  • Use CH340 Serial Port Chip -- Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2..
  • Support 24V Input -- The heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run Marlin firmware, the configuration is completely same as Ramps 1.4..
  • Compatible With -- Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32. X-axis, Y-axis and Z-axis with different color terminal controls the stepper motors and endstops, which is convenient to wire..
Check Stock

Nsddm Submarine Remote Control Boat ，Control Submarine Underwater Drone Boat Drones with Camera Remote Contro Boat for Kids Gift Color Blue

  • 3 Motors: 3 motors installed to control static diving, propelle.r & rudder system respectively with a remote waterproof transmitter..
  • Multiple Functions: right/ left, up/ down, forward/ backward, 360° turn around，Workable range up to 4 meters (Indoors)..
  • Single Drive Screw Propeller System: Single Drive Screw Propeller System enables the submarine to move forward, backward, left, right. Maximum speed....
  • Ability Train: The micro size rudder system enables submarine to rotate 360° clockwise or anti-clockwise. Exercise your kid＇s mental ability and....
  • Static Diving System: The static diving system enables the submarine to float & dive up to 0.5 meters depth.
Check Stock

sopbost 24V Kids UTV 2WD/4WD Switchable 5MPH Ride On Toy Car with Remote Control Battery Powered Off-Road Quad Electric Vehicles for Boys Girls, EVA Rubber Wheels, Black

  • 24V 4x4 Single Seater Kids UTV: This 24V battery powered kids ride on UTV is designed for kids aged 3-8, 4pcs 35W drive motors and EVA rubber tires wheels make it easily to ride on different terrains. What’s more, you can switch the driven mode between the 2-wheel drive (2x2) and 4-wheel drive (4x4) according to driving needs..
  • Kids Driving & Parental Control: The ride-on toy car with 2.4GHz parental remote control lets your kids drive the car manually, and parents can also operate this toy car via the remote control. Two driving modes design can improve the safety while kids driving and avoid potential danger..
  • sopbost Newest Kids Off-Road Vehicle: Key start, adjustable seatbelt, bright LED lights, double lockable doors, powerful four driving force, high chassis design & EVA rubber explosion-proof wheels, newest off-road appearance design. Your kids can drive on various of rough terrains and get a great driving experience..
  • Kids Electric Vehicle with Music Play: This ride-on truck provides device connection functions (USB/Wireless Connection), you can connect your devices to the toy car to play your kids' fa....
Check Stock

Wolo (MCHWK-2) Air Horn Wiring Kit

  • Makes installation of any direct drive air horn (no tank) easy, trouble free and professional, without any special tools.
  • The kit is designed to easily hook-up a direct drive air horn to the vehicles factory horn system.
  • Included in the kit is all that is required to install a direct drive air horn.
  • wire harness with quick connect plug for the relay, terminals, in-line fuse, plastic wire ties and easy to follow instructions in English / Spanish.
  • Ideal for any 12-volt car, motorcycle, truck, etc.
Check Stock

Dually

  • Designed for harsh environments, this step features dual motors to handle mud-caked rockers and sub-zero winters.
  • Features an aggressive design for extreme traction and bold style.
  • Automatic, electric-powered running boards instantly extend when you open your door, and then hides itself safely out of sight when the doors close.
  • Includes low-profile, integrated LED light system..
  • High-strength die-cast aluminum components and maintenance-free, self-lubricating bushings for all weather performance.
  • Weatherproof, OEM Quality electric motors, drive system and wiring harness.
  • Pressure sensitive, pinch-proof technology.
  • Made in the USA and backed by a 5-year limited warranty.
Check Stock

AOICRIE 5Pcs L298N Dual H Bridge Stepper Motor Driver Board For Arduino (5pcs)

  • 【Package Included】- 2pcs L298N Motor Driver Controller Board Modules..
  • 【Item Condition】- Drive voltage 5V-35V, high working power to 46V. Large current can reach 3A MAX and continue current is 2A. Power to 25w.(NOTE: To avoid damage, please use an external 5V logic supply when using more than 12V driving voltage.).
  • 【High Quality】- Use L298N as the main driving chip, so the module has such features as strong driving ability, strong anti-interference and low calorific value. And it also use large-capacity filter capacitor and diode with freewheeling protection function, thereby improve the reliability of module..
  • 【High Efficiency】- Dual-channel H-bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
  • 【Easy of Use】- No assembly required. This L298N board comes ready to go. Just wire up motors and power, this thing will work wonders..
Check Stock