ReviewsDirect Injection Valve Cleaner

OTC 6080 Fuel Injection Test Kit for Master Cummins Diesel Engine

  • Includes the fittings and gauge needed to check fuel pressure fuel volume and fuel restrictions from the delivery pump to the injection pump.
  • Kit includes special quick-disconnect banjo fitting two fuel injection quick-coupler adapters quick-disconnect banjo fitting gauge assembly and fuel volume test adapter.
  • Also includes a diesel fuel inlet restriction test adapter for 1988-98 Dodge pickups and vans with 5.9L 12-valve and 1998-1/2-newer 5.9L 24-valve Cummins diesel engines.
Check Stock

Premier Whole House AIO Air Injection Oxidizing Well Water Filter System Fleck 2510SXT 10T-FE | Removes Iron Sulfur and Manganese

  • Perfect for Well Water: Filtration with Air injection Oxidizing Whole House Water System.
  • System is equipped with a Fleck SXT air injection control valve, 1” by-pass valve (or 3/4" by request), black Structural mineral tank and all....
  • Can remove up to 8 ppm Hydrogen Sulfide and up to 7 ppm Iron. A daily backwash will remove accumulated iron and replenish the filter media bed. The....
  • Lower required backwash flow rates and less frequent backwash frequency reduces the amount of water used by the backwash cycle..
  • Easy to install system offers air injection, oxidation, and contaminant removal all within a single tank. This minimizes space requirements, reduces....
Check Stock

Dasbecan 7.3 IPR Fuel Injection Pressure Regulator Valve & ICP Control Sensor 7.3 powerstroke Compatible with Ford F250 F350 F450 F550 F650 F750 E350 E450 E550 F81Z9C968AA 1829856C91 1841217C91

  • Compatible with Ford F-250 F-350 F-450 F-550 F-650 F-750 E-350 E-450 E-550 IPR Valve & ICP Sensor 7.3 powerstroke, please view the following....
  • Replace Part number: F81A9C968AA, F81Z9C968AB, AP63402, F81Z9C968AA, F81Z-9C968-AB, F5TZ9C968A, 1841217C91, 1829856C91, 1836412C91, 1841086C91,....
  • The 7.3L fuel injection pressure regulator IPR valve & ICP control sensor installation is super easy and direct fitment and perfect replacement, meets....
  • The 7.3L injector pressure regulator valve can be located behind the engine attached to the high pressure oil pump (HPOP). If you are experiencing no....
  • Warranty: For any reason, if you are not satisfied with your purchase, contact us directly. We would reply in 24 hrs. One-year warranty, 100%....
Check Stock

Actron CP7818 Fuel Pressure Tester Kit,Black

  • Actron's Fuel Pressure Tester Kit works on most domestic fuel injected vehicles having a Schrader valve test port on the fuel rail.
  • Use on the following: Ford high pressure central fuel injection and GM, Ford, and Chrysler multi-port fuel injection - multi-port means one fuel injector per cylinder.
  • Tests: fuel pump check valves (leak down test), fuel pressure regulators, weak fuel pumps, fuel line integrity (clogged or damaged fuel filters), leaking injectors.
  • Kit includes: large easy-to-read 2-1/2 inch gauge with standard (0-100 psi) and metric (0-700kPa) scales, Ford fuel line adapter, solid brass fittings, & pressure relief valve for safe, clean testing.
Check Stock

STOK Cold BRew Coffee Not Too Sweet, 46 oz, Pack of 2

  • GOURMET COFFEE: Calling all cold brew and iced coffee lovers! Stack Street cold brew ground coffee is handcrafted, flavorful, aromatic and made using premium quality coffee beans. Pour over ice and enjoy!.
  • SOURCED RESPONSIBLY: Stack St. gets coffee direct from growers without middle-men. Our coffee is all natural and certified USDA organic, without synthetic fertilizers or chemicals, meaning cleaner beans, and ultimately a cleaner planet!.
  • DARK ROAST & COARSE GROUND: Our dark roast coffee grounds are perfect for making premium coffee at home. Make it with your French press and filtered water or make it using a mason jar. A coarse grind makes it ideal for cold brew..
  • RESEALABLE FRESHNESS BAG: Our special packaging keeps the grounds fresh and makes it easy to store. A 3-layer PE and aluminum foil bag with a one-way valve maintains the quality and aroma. Grounds are packed by our highly trained artisans..
Check Stock

IPR Socket Tool Screen Kit - Compatible with Ford Powerstroke 6.0L Vehicles - F-250, F-350 Super Duty, Excursion, E-350 - Replaces 3C3Z9H529A, 904-415, 3C3Z-9H529-A, Injection Pressure Regulator

  • Replacement IPR Valve Seal Kit With Socket Tool - The injection pressure regulator valve regulates the oil bypass circuit of the high pressure oil pump. It is an electromagnetic valve that opens and closes to allow high pressure oil into the injectors. When the oil system gets contaminated by dirt or debris, the mesh filter of the IPR valve gets torned letting the debris get in and make the plunger mechanism inside to get stucked causing the vehicle to not build up pressure..
  • Compatible Replacement for Ford Vehicles - 2004 - 2005 E350 Club Wagon | 2004 - 2010 E350 Super Duty | 2004 - 2010 E450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F250 Super Duty | 2003 - 2007 F350 Super Duty | 2003 - 2007 F450 Super Duty | 2003 - 2007 F550 Super Duty | 2003, 2004, 2005, 2006, 2007 F650 | 2003 - 2007 F750 |. The oil system usually gets contaminated when the oil cooler is serviced or replaced and has not been cleaned properly..
  • Replaces Part# 3C3Z9H529A, 904-415, 3C3Z-9H529-A, 904415 commonly found on popular models with the Diesel Powerstroke 6.0 engine including year models 04, 05, 06, 07, 08, 09, 10. If you are experiencing no or hard starting when the engine is hot or after stalling and usually starts when it is cold or your vehicle is idling erratically ....
Check Stock

JIFETOR Universal Auto Gasoline Gas Fuel Injection Pressure Tester Gauge Tool Set Only for Bosch CIS System Car Truck SUV Motorcycle ATV RV SUV Blue Case

  • BOSCH CIS DEDICATED SYSTEM: Fuel pressure test gauge kit includes 1PC fuel pressure gauge tester with rubber hose and drain hose, 1PC hose assembly for Bosch CIS (Continuous Injection System), and 9PCS metal adapters. More professional, more efficient. Specifically recommended for use with import and domestic gasoline vehicles including cars, SUVs, and trucks using Bosch CIS systems. If you need a full system of fuel injection pump set please serach for B085TM8577 in our store..
  • FUEL INJECTION GAUGE TESTER: Fuel pump pressure tester is an essential part of the troubleshooting process of automotive fuel injection systems. Gauge is made to detect bad fuel pumps, bad pressure regulators, leaking injectors and clogged fuel filters. Fuel injection tester features 4" big dial, built-in hoses with pressure relief valve, and quick coupler system. Low pressure range (0-140 psi/0-10 bar) makes it limited to gasoline engines for fuel pressure test..
  • HOSE WITH METAL ADAPTERS: Fuel pressure gauge set contains 1PC built-in 43" long rubber hose with 44" clear drain hose, and 1PC 27.5" Bosch CIS- specific hose valve assembly for test connection. Rubber hoses endure torsion, temperature and pressure extremes to ensure safe use. Brass for corrosion resistance, and ducti....
Check Stock

Shower System, Shower Faucet Sets Complete with Wall Mounted Shower Fixtures Rough-In Valve Body and Trim Kit (Brushed Nickel)

  • SHOWER KIT INCLUDE：8 inch square rain shower head (Brass), handheld shower (Brass), 16 inches shower arm (Brass), 59 inches shower hose (304 stainless steel), shower holder (brass) and Shower Faucet Rough-in Valve Body (brass).
  • 3-FUNCTION WITH ONE SWITCH: Select between 10" large square overhead shower and hand shower separately or choosing overhead shower+hand shower simultaneously (choose among 3 shower settings with ONE SWITCH). Our shower valve comes with built-in diverter. Ceramic disc diverter valve provides smooth and easy function-switching operations..
  • Air Injection Technology - Save up to 30% on water with the innovative air injection technology, which is also ideal for noise reduction. The water and air mixture is a perfect solution for areas with low water pressure!.
  • Easy to Replace any Shower Trim Kit: flexibility is the big benefit of the universal valve. Once the Rough is installed, future shower function upgrades or style changes can easily be made without altering the Plumbing behind the wall..
  • Any problem with product,pls feel free to contact us. Within 2 years, any product quality problem can be guaranteed free of charge..
Check Stock

Viewer Questions: Fuel System Requirements When Converting From Gas to Diesel

  • 【Accurate Fuel Injection】Air-cooled diesel engine four-stroke single cylinder adopts direct injection fuel system with good atomization to achieve accurate fuel injection and save fuel for you. Commodity parameters:Crankshaft: Horizontal,Size: 13.2 * 14.96 * 16.3 inches,Net weight : 59.5 lb,Material: aluminum alloy box,System: direct injection fuel system,Rated power: 3.6kw,Displacement (L): 0.247,Fuel tank volume (L): 2.5,Engine speed: 3600r / min..
  • 【Speed Control Handle】Diesel motor engine can be positioned at any speed, equipped with throttle cable mount, you can install the throttle cable as needed..
  • 【Fast Heat Dissipation】4 Stroke single cylinder air cooled vertical engine has an air-cooled diesel engine made of aluminum alloy with reinforced and thickened treatment, which makes it have good heat dissipation and protect the machine..
  • 【Small Space Occupation】Tiller crude oil engine has compact structure and small size, occupying less space than other engines..
  • 【Wide Range of Application】Heavy duty single cylinder air- cooled diesel motor engine is suitable f....
Check Stock

Motivx Tools Oil Filter Drain Tool Compatible with Toyota, Lexus and Scion Vehicles with Cartridge Style Oil Filter Systems

  • Cleaner Oil Changes - This tool fits Toyota 2.0L to 5.7L engines that use the cartridge style oil filter system. It makes the oil change process much cleaner by draining the filter housing prior to removal preventing oil spills..
  • Avoid The Mess - Simply screw the tool into the drain valve on the oil filter housing, then tighten the knurled nut to drain the housing. Once the housing is drained it can be removed to replace the filter without the usual mess..
  • High Quality Construction - This drain tool will provide years of service thanks to it's heavy duty construction. The 3 piece all metal body connects to a 30” long silicone drain hose that allows you to direct the oil into your oil disposal container..
Check Stock

Taylor Made Products 61149 Tuff End Inflatable Vinyl Boat Buoy, Orange, 18 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock