ReviewsDock Height Pallet Jack

BISupply Pallet Buster Tool in Yellow with 41in Long Handle – Deck Wrecker Pallet Tool Pry Bar, Deck Board Removal Tool

DISASSEMBLE PALLETS & MORE: Rid your garage, workshop, or warehouse of broken or unsightly pallets with this pallet breaker.
Pallet bar is designed with an articulating pivot-action head that will not break or split the wood and is for multipurpose use in disassembling a pallet, deck, dock board removal for replacement or repurposing to reuse wood in do-it-yourself (DIY) reclaimed pallet furniture projects.
Pallet ripper can straddle a board up to 3.6 inches (9.4cm) wide.
3-5/8 inch inside diameter (ID) between pallet pry bar legs.
To remove boards on narrowly-spaced pallet planks, this pallet breaker tool includes leveling-type heads with a rocker design to successfully reach between the planks.
You can also remove the end plank by using another pallet or spare wood as a brace.
GRIP COMFORTABLY: Save your back, your arms, and your sanity with this pallet pry bar tool as it has an extra-long handle to efficiently transfer leverage.
41-inch (104.1cm) overall shaft length with 4-inch x 1.5-inch (10.2cm x 3.8cm) rubber grip end cap.
BUILT TO LAST: Constructed from solid steel with a powder coat finish for maximum strength and longevity that resists corrosion.
Save time and prevent splitting wood with this pallet rem....

Check Stock

APOLLOLIFT 1.4\ Low Profile Manual Pallet Jack Truck 2200lbs Capacity 48\ L×27\ W A-1010

Brand New Pallet Jack Poly Load Wheels With Bearings 3"D x3.75"W - A Pair. Entry / exit roller pair included for smooth and quick in-n-out operation..
Wheels adaptable to pallet trucks and transport trolleys. Ideal as a replacement for pallet truck wheels when worn or broken..
Non-marring wheels leave no marking on your surfaces..
Brand New Pair of Load Wheels for Pallet Jack / Truck Poly Tread with Bearings. High resistance and quality polyurethane (PU) wheel..
Wheel Size: 2.75"D x 3.75"W included 4 of 6204 20 mm I.D. bearings ea. Axle Diameter : 3/4".

Check Stock

Dock N Stow Trailer Jack Stand, Stabilizing Leveling Block Stores on Tongue Frame, Fits Most Jack Foot Plates, and Wheels, RV Camper, Pop Up, Boat, Utility Travel Accessories, Secures w/a Magnet GEN 2

MULTI-USE: Dock N Stow Gen 2 supports most any trailer tongue jack without damaging the trailer. It has a 5000 lb. capacity for any foot or post, round or square and a 2500 lb. wheel dock capacity. For RV's, Boating and Most Bumper Pulled Trailers..
SPACE-SAVER: Gen 2 sits directly on 2, 2.5 or 3-inch trailer tongue or frame with the included dovetail spacers. Stored close to the area of use, you’ll never have to search for a stand again and you'll have more storage space to bring what you need..
SAFETY: Gen 2 secures to steel square, rectangle tube, I beam and channel trailer frames with a powerful on/off switchable magnet. Drive with it safely attached to your trailer. No more climbing up into the truck for your block of wood, risking injury..
ADDED HEIGHT: Dock N Stow provides 6 inches of height saving you time trailering or de-trailering, no need to lower your jack to the ground. With the 1/4 inch lip around the top, they are stackable, add another Dock N Stow on top for 12 inches of height..
DURABLE: Gen 2 has durability built into it, engineered and made for the outdoors using high quality ABS plastic, it's resistant to UV exposure, water, heat, mud and most other environmental hazards. If Dock N Stow gets dirty, wipe it clean in seconds..

Check Stock

Dock N Stow Trailer Jack Stand, Stabilizing Leveling Block Stores on Tongue Frame, Fits Most Jack Foot Plates, Wheel, RV Camper, Pop Up, Boat, Utility Travel Accessories, Secures with a Bungee, GEN 1

...u need. *Not to be used with C channel or I-beam frames..
SAFETY: Gen 1 secures to square or rectangle tube frames with an included adjustable flat bungee & anti-slip silicone tape. Drive with it safely attached to your trailer. No more climbing up into the truck looking for your block of wood, risking injury..
ADDED HEIGHT: Dock N Stow provides 6 inches of height saving you time trailering or de-trailering, no need to lower your jack to the ground. With the 1/4 inch lip around the top, they are stackable, add another Dock N Stow on top for 12 inches of height..
DURABLE: Gen 1 is extremely durable, engineered and made for the outdoors using high quality ABS plastic which is resistant to UV exposure, water, heat, mud and most other environmental hazards. If Dock N Stow does get dirty, wipe it clean in seconds..

Check Stock

APOLLO Electric Pallet Jack Truck Lithium Battery 3300lbs Capacity 48\ Length x 27\ Width Fork Size for Material Handling

This pallet jack with load capacity:3300lbs.Lithium battery capacity:24V/20AH. It goes forward and backward, up and down by electricity..
Indoor using type Li-ion powered pallet truck , with similar size as manual pallet truck , offer small turning radius , it is super light and easy to operate..
With multi-function operating handle, convenient, including accelerator, emergency reverse switch and Horn button..
Electric pallet jack battery can taken out and charged in a different location with the charger..
Portable lithium battery,it only takes 3-5 hours to fully charge..

Check Stock

Dock N Stow Trailer Jack Stand, Stabilizer Leveling Block Store on Tongue Frame, Fits Most Jacks, Set Includes Wheel Chocks & Lock, RV Camper, Boat, Pop Up Travel Accessories, Secure w/Bungee, GEN 1B

...to your trailer and only move it when you need to use it..
INTEGRATED WHEEL CHOCKS: Gen 1 Bundle includes 2 chocks with an extension that fits into the bottom of block. A recessed neodymium magnet on bottom of chock prevents sliding on frame. Each measure 7 inches in length and accommodate most trailer wheels..
ADDED HEIGHT: Dock N Stow provides 6 inches of height saving you time trailering or de-trailering, no need to lower your jack to the ground. With the 1/4 inch lip around the top, they are stackable, add another Dock N Stow on top for 12 inches of height..

Check Stock

9TRADING A-Frame 12V Electric Trailer Lift Jack 4,000lbs 14\ Lift Tongue Jack RV Trailer

【Parameters】: Capacity: 3 ton, Max Height: 15.7in, Min Height: 5.9in, Handle Length: 29.5in, Outer Diameter of Air Ring: 11in, Rubber Feet Outer Diameter: 2.4in, Air Pressure: 8 to 12 bar.
【Durable Structure】: The pneumatic jack is made of high-strength steel, anti-oxidation spray paint for rust and corrosion resistant, which is durable and high strength, last for long service life.
【Stable Design】: The internal telescopic stabilizer of this bag air jack ensures lateral and vertical stability.
The pallet is enlarged with rubber cushions, enlarged and thickened tractor, ensure firm and stable lifting.
【Easy to Use】: This pneumatic air jack can quickly lift the vehicle up to 3 tons, much more effort saving than traditional jacks.
The long handle is easy to use, it is suitable for soft and easily collapsed terrain, sandy soil or muddy road surface.
【Wide Use】: Compact and lightweight triple bag air jack , it can be positioned up and down quickly, suitable for a variety of car models, such as family cars, small vans, SUV off-road vehicles and more, ideal tool for home garage and auto repair shop.

Check Stock

CRWON PTH50 Pallet Jack Wheel Replacement Kit Set Complete

Crown pallet jack PTH50 wheels replacement set.
1 x Pair Steer Wheels Poly Tread complete with Bearings, Axle, Protective Caps & accessories..
1 x Pair Load Wheels Poly Tread complete with Bearings, 2 Axles, Protective & accessories..
This is specific set for Crown manual pallet jack PTH50.

Check Stock

Penkwiio 2Pack Pulley Block V Heavy Duty Single Wheel Pulley Block Duplex Bearing 304 Stainless Steel Grooved Wheel Smooth Loading 880lb/400 Kg for Material Handling and Moving Gym

This pallet jack with load capacity:3300lbs.Lithium battery capacity:24V/20AH. It goes forward and backward, up and down by electricity..
Indoor using type Li-ion powered pallet truck , with similar size as manual pallet truck , offer small turning radius , it is super light and easy to operate..
With multi-function operating handle, convenient, including accelerator, emergency reverse switch and Horn button..
Electric pallet jack battery can taken out and charged in a different location with the charger..
Portable lithium battery,it only takes 3-5 hours to fully charge..

Check Stock

SellEton SL-5000-PJP Industrial Warehouse Truck/Pallet Jack Heavy Duty Scale (5000 lbs x 1lb with Printer)

✔HEAVY-DUTY PALLET JACK SCALE: Our SellEton SL-5000-PJP Pallet Jack Scale is ideally suited for standard US pallets with openings higher than 3.4″. This highly recommended scale is capable of handling up to 5000 lbs in 1lb increments. The heavy-duty design features top-quality materials that are durable and functional. This scale device can also be used in various types of applications from warehouse & standard US pallets. A pallet jack has dimensions of 50" x 27" x 48"..
✔ACCURATE & DURABLE: The SellEton Heavy Duty low-profile pallet jack scales are extremely durable and could be used for standard US pallets. Our design makes it easy to insert the forks into the pallets and take them out. 4 alloy steel shear beam load cells and Rubber-rimmed wheels make it accurate & durable. Furthermore, this unit will come with Stainless Steel and a Built-in printer..
✔HIGH QUALITY INDICATOR: High-quality PS-IN202SS-P indicator could be used for indoor or outdoor purposes. It has a Stainless Steel housing which allows indicator to be used outside or in rough conditions. Also it comes with Built-in Printer. Indicator has an easy-to-read LCD screen with a 1.5" Tall backlit display. It displays up to 50,000 graduations. It has Built-in Rechargeable battery. It ....

Check Stock

FPPS 3 Ton (6000 lb) Capacity 48\ Ratcheting Off Road Utility Farm Jack with Lifting, Pulling, Clamping, Winching and Spreading

【PRODUCT ATTRIBUTES】Pneumatic Jack, capacity:6600LBS, height range: 5.71-16 inches, working pressure: 145Psi / 10Bar / 1.0Mpa, air inlet: G1/4, lifting time: 5 seconds, working temperature: -60 ℃～50℃..
【STURDY AND DURABLE】 The pneumatic jack is made of high-strength steel, and the whole uses anti-oxidation spray paint, and the matte baking paint prevents rust and corrosion, and is durable. The pallet is enlarged with rubber cushions, and the tractor is enlarged and thickened, and the lifting is firm and stable..
【WIDE APPLICATION】 The hand-type pneumatic jack has stable and powerful jacking and a wide range of applications. Suitable for a variety of models, such as family cars, small vans, SUV off-road vehicles and so on..
【NOTE】 When using the pneumatic jack, please do not exceed the limited tonnage. In order to prevent accidents, please use it with the safety bracket at the same time to ensure safe use. When in use, use it on a relatively horizontal and stable ground. Keep the contact part of the jack and the car within the range of 10-20mm outside the middle of the jack. When the airbag rises to the highest point, stop the air supply..

Check Stock