ReviewsDockside Boat Bumpers

Marine and Rv Direct 4 Boat Fenders 6.5” X 23” Vinyl Ribbed Bumper Dock Shield Protection Includes 7 Foot Long 3/8s Braided Fender Lines & Pump to Inflate

  • 5 year Warranty given by us on all of our Ribbed Boat Fenders. The package contains #4 Ribbed Boat Fender Bumpers, #4 Seven Foot boat fender Lines, #1 air pump, and needle to inflate.
  • Keeps your boat from getting scratched and damaged when tied up at the dock or when tied up to other boats. Reinforced eyelets. The Ribbed boat bumpers fenders can be hang vertically or horizontally. Made for everyday use. These Ribbed Fenders are made of soft vinyl and won’t scratch your boat.
  • Simple to inflated with the pump included.
  • Please see sizing picture in the ad. To select the correct size for your boat if you are going to be docking in open lake prone to high winds or in an area where your boat is prone to other boats wake (non no wake zone), one size larger is recommended. Place #1 for every 10 foot of boat length with a minimum of 3 fenders along one side.
  • Our Ribbed Fenders are Rust protected and come in sizes from: 6.5” x 23.
  • 8.5 x 27” (Double Eye) 8” x 20” and 10” x 28” (HTM, Hole through the middle). See sizing chat in Pictures for the right fender for your boa....
Check Stock

Turmaster Boat Fenders 4 Pack 4.5'' x16'', Ribbed Twin Eyes Boat Fenders Bumpers for Docking, Inflatable Boat Bumper with 4 Ropes, 4 Needles and 1 Pump,Blue

  • ...nd features great buffer effect, protecting boats from damage caused by heavy collision between hard surfaces, especially when the boat speeds into the shore or even when two boats collide accidentally. And It could also be an good choice as an anchor buoy..
  • ⛵【Marine-Grade Material & Practical Design】 Our Boat Bumpers are made of marine-grade PVC, features shock resistance, anti-corrosion and UV resistance.
  • Seamless one-piece construction prevents from splitting up and features a high performance of compression resistance.
  • with ribbed on all sides increase friction and resist abrasion, making it strong enough to withstand external force extrusion..
  • ⛵【Reinforced Twin Eyelets Design】 Designed with reinforced molded eyelets on both ends, and the eyelets are reinforced to prevent breaking in daily use. You can hang the boat fenders vertically or horizontally with the two eyelets according to your needs, easy to install & disassemble and help the boat fenders for docking attach to boat more firmly..
  • ⛵【Equipped with Fender Lines & Pump】 Comes with 4 Pack Boat Fenders (4.5'' x16''), 4 Fender Lines (6.5ft in length), 4 inflating needles and 1 hand pump.
  • Our boating accessories offer superior quality and reliability while on the water..
Check Stock

BTG GEAR Pair/Set of 2 (Two) Inflatable Boat Fenders/Bumpers in Black, 5.5" x 20", w/ Free 6' Fender Lines & Pump

  • FOR BOATS UP TO 21’ – These BTG Gear Ribbed Boat Bumpers are great for boats up to 21’ in length..
  • INCLUDES FENDER LINES – Includes two 6’ long fender lines for easy hanging in any situation..
  • INCLUDES FREE SPORTS BALL PUMP – Includes a free sportsball pump for easy inflation of the boat fenders (fenders come deflated).
  • HANG HORIZONTALLY OR VERTICALLY – The bumpers can be hung horizontally or vertically..
  • SUPER SOFT MARINE VINYL – Each boat fender is made from super soft marine vinyl that is not marking and is meant to protect your boat even in the most severe conditions..
Check Stock

Marine Mate Boat Bumpers for Docking, Inflatable Boat Bumpers, fenders, Buoy for Docking 20ft -30ft Boats Safely. 6.5inch - 4 Boat Bumpers, 4 Ropes, 1 Pump and 2 Needles

  • ...sea conditions, these have been land tested by running them over with vehicles and pressure tested during manufacturing. Rest assured with our years of manufacturing experience that Marine Mate fenders will protect your boat..
  • We recommend all boats carry at minimum 3 boat bumpers for docking. At least 1 fender for every 10 ft of waterline length. A 20ft boat should have three fenders while a 40ft boat should have four fenders. Add an additional bumper if you are mooring in challenging conditions or if your boat is heavy..
  • Heavy duty, high quality boat fenders with reinforced molded eyelets that allow vertical or horizontal hanging. Durable enough to last years and years even with everyday usage. High quality pre looped ropes for hanging, 2 needles and 1 pump..
  • 3 Years warranty for boat fenders by Marine Mate. You will receive 4x 6.5 inch boat bumpers for docking, 4 x looped heavy duty boat bumper ropes, 2 x needles and 1 air pump for easy set up and boat storage.
  • Easy 35 second inflation per bumper and deflate if needed. Personally we keep our boat fenders inflated with air 100% o....
Check Stock

Marine Mate 5.5 inch Black Boat Bumpers for Docking, Inflatable Boat Bumpers, fenders, Buoy for Docking 16ft -22ft Boats Safely. 4 Boat Bumpers, 4 Ropes, 1 Pump and 2 Needles

  • ...sea conditions, these have been land tested by running them over with vehicles and pressure tested during manufacturing. Rest assured with our years of manufacturing experience that Marine Mate fenders will protect your boat..
  • We recommend all boats carry at minimum 3 boat bumpers for docking. At least 1 fender for every 10 ft of waterline length. A 20ft boat should have three fenders while a 40ft boat should have four fenders. Add an additional bumper if you are mooring in challenging conditions or if your boat is heavy..
  • Heavy duty, high quality boat fenders with reinforced molded eyelets that allow vertical or horizontal hanging. Durable enough to last years and years even with everyday usage. High quality pre looped ropes for hanging, 2 needles and 1 pump..
  • 3 Years warranty for boat fenders by Marine Mate. You will receive 4x 5.5 inch boat bumpers for docking, 4 x looped heavy duty boat bumper ropes, 2 x needles and 1 air pump for easy set up and boat storage.
  • Easy 35 second inflation per bumper and deflate if needed. Personally we keep our boat fenders inflated with air 100% o....
Check Stock

Marinco 110A Marine Electrical Shore Power Pigtail Adapter (50-Amp 125-Volt Locking Male to 30-Amp 125-Volt Locking Female with Sealing Collar System, Yellow)

  • 50 Amp 125V Locking Dock Side/Male Plug, 30 Amp 125V Locking with Sealing Collar System Boat Side/Female Connector.
  • Allows you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of a different power configuration.
  • Fully molded and equipped with the Marinco unique sealing collar (where indicated) and covers for use in wet locations..
  • Contoured Grip. Thumbprint Ground Blade Locator.
Check Stock

ProMariner 63180 ProNauticP Series 2430P - 24 Volt, 30 Amp Battery Charger

  • Up to 12 performance & precision 4-stage charging profiles: Charge, Condition, Maintain and Re-condition. Automatic dockside power mode for 12 Volt DC lighting and appliances. Factory set for Flooded (Lead Acid) batteries. AGM, GEL selectable..
  • Auto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. consumes less power so more AC power is available on board..
  • Automatically programs conditioning time based on discharge state of batteries. Automatically de-sulfates batteries after 21 days in the maintain mode, improving reserve power performance & extending battery life..
  • Real time indication of wiring faults or adverse conditions that may impact the operation of a boat’s charging system..
  • After 72 hours of not seeing a load greater than 5 amps, float voltage will be lowered consuming less energy during storage periods. (for flooded & sealed charge profiles).
Check Stock

Marinco 117A Marine Electrical Shore Power Pigtail Adapter 30-Amp 125-Volt Locking Male to 50-Amp 125/250-Volt Locking Female with Sealing Collar System Yellow

  • 30 Amp 125V Locking Dock Side/Male Plug, 50 Amp 125/250V Locking with Sealing Collar System Boat Side/Female Connector.
  • Allows you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of a different power configuration.
  • Fully molded and equipped with the Marinco unique sealing collar (where indicated) and covers for use in wet locations..
  • Contoured Grip. Thumbprint Ground Blade Locator.
Check Stock

VEITHI Boat Fenders 4Pack, Ribbed Twin Eyes Vinyl Boat Fender, Boat Bumpers for Docking, Come with Ropes, Needles and Pump to Inflate (6.5x23inch)- White

  • These boat bumper are made from marine-grade PVC,it features anti-corrosion, UV resistance.Seamless one-piece construction prevents from splitting up,they will last a long time..
  • The boat fenders 4pack has eyelets in both ends,you can hang it vertically or horizontally.Designed with vertical ribs,add protection strength..
  • The high-quality vinyl material makes the surface of the pontoon boat fenders smooth and translucent,and the incredible appearance performs well on your yacht.Feel soft not leave scuff marks on your hull.And this vinyl material can make the fender easy to clean and resist stain to keep the bright color all the time..
  • The package contains 4 pcs 6.5inch boat bumpers for docking,4pcs 6.56ft rope (3/8”diameter)for easy suspension,4 inflating needles and a pump to inflate,it means you don’t need to spend extra money to buy anything..
  • These well made,durable boat bumpers fenders play very important protective role in collisions caused by ships docking or sailing.Great for boats,Iuxury yachts and dock.boat fenders white could also be an excellent choice as an anchor buoy..
Check Stock

JSP Manufacturing Black Plastic Pontoon Boat Square Rail Fender Adjuster Hanger Clip 4

  • New Pontoon Boat Square Rail Fender Adjuster Plastic Clips.
  • Mounts securely to standard 1” or 1.25” square rails ~ Easy to Install and reposition – simply snap onto your boat rail.
  • Fits boat lines / ropes up to 3/8” ~ Perfect to hang your boat bumpers.
  • Color: Black ~ Quantity: 4 ~ Made in USA!.
  • Fits: Pontoon Square Boat Rails - for 1" or 1.25" square rails.
Check Stock

JSP Manufacturing Grey Plastic Pontoon Boat Square Rail Fender Adjuster Hanger Clip 4

  • New Pontoon Boat Square Rail Fender Adjuster Plastic Clips.
  • Mounts securely to standard 1” or 1.25” square rails ~ Easy to Install and reposition – simply snap onto your boat rail.
  • Fits boat lines / ropes up to 3/8” ~ Perfect to hang your boat bumpers.
  • Fits: Pontoon Square Boat Rails - for 1" or 1.25" square rails.
Check Stock