ReviewsDog For Capricorn

Creality Capricorn 2 Meters XS Series Low Friction PTFE Bowden Tubing for 1.75mm Filament with PTFE Tube Cutter for Creality Ender 3 Ender 3 Pro Cr-10 3D Printer

  • 100% Original Capricorn XS Serious tubing Original.
  • High Lubricity Additives make XS Series tubing the lowest friction bowden tubing on the market. More responsiveness, accurate prints, less....
  • Lower retraction will save you more time while the extruder retracts in printing..
  • 1.9mm ± 0.05mm Inner Diameter Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest....
  • Advanced material of Capricorn XS Series can make it resist higher temperature, Capricorn XS tubing will operate at even higher temperatures than our....
Check Stock

Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting

  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
  • Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS,....
  • Upgraded Pneumatic Fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer....
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • 1 Meter in length PTFE tubing. F1RST LAYER is an authorized distributor of Creality and Capricorn 3D Printing products. Please contact us directly for....
Check Stock

Creality 3D Capricorn Bowden PTFE Tubing 1 Meter Tube Cutter XS Series with 5 pcs Nozzles for 1.75mm Filament Ender 3 Ender 3 Pro, Ender 5, CR-10,CR-10S 3D Printer

  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend..
  • Capricorn PTFE tubing ensures the highest quality prints at any given temperature. This XS series tubing is rated for high temperature printing, and also boasts greater lubricity leading to less friction, less slippage, and less wear. Great for flexible filaments! Also guaranteed with to have an inner diameter accurate to within 0.05mm, enabling fine tune retraction settings with more precision than ever before!.
  • The perfect replacement kit if the your stock hotend has failed or constantly jams.Capricorn tubing provides enhanced precision for retraction settings, meaning less stringing on prints once calibrated..
  • Comes with 1 Meter Tubing, five Brass nozzles and one cutter.
Check Stock

Archetype QIDI Technology High Temperature Stainless Steel Nozzles with High Temperature PTFE for All QIDI TECH 3D Printers All Sizes (2pcs) (36mm (X-Max/X-Plus/X-One/Qidi Tech I))

  • QIDI TECHNOLOGY High Temperature (.4mm) Stainless Steel Nozzles & High Temperature Capricorn PTFE Tubing..
  • Wear resistant Stainless Steel Nozzles & Capricorn PTFE - regarded as the highest quality to withstand printing High Temperature filaments such as ABS, Nylon, Poly-carbonates and more..
  • Available for ALL QIDI Technology 3D Printers & ALL PTFE Sizes (i-Fast/i-Mate/i-Mates/X-Max/X-Plus/X-Pro/X-Maker/X-Smart/X-One/Qidi Tech I).
  • Package includes: (2Pcs) Stainless Steel Wear Resistant Nozzles - (0.4mm) (2pcs) Capricorn PTFE tube: (All Sizes).
  • Same Day Shipping before 2:00 P.M. Central Std. Please feel free to contact us at any time for additional Nozzle and PTFE sizes. We will gladly provide custom solutions tailored to any request. We will reply to you within 24 hours..
Check Stock

Capricorn Birthday Cake Topper, Glittery Capricorn Birthday Cake Decor, 12 Constellation Zodiac Birthday Party Decorations

  • I'm a Capricorn Cake Topper: which is ready to sparkle at Capricorn birthday party! Making your cake looks more beautiful and glittering!.
  • Original Design: all of our products designed by our own design, making your cake/dessert looking unique!.
  • Material: our cake toppers are made from Thick Glitter Paper. And the Wooden Stick are safe and thickness..
  • Notice: all our toppers are recommended for DECORATION use only. To avoid accidents, we also recommend that you DON'T let children use it to play as toy..
  • Contact Us 24/7: our team will stand by to answer all your questions all the time. And we promise we will give you an unconditional refund or exchange, just buy with confidence!.
Check Stock

Aovila Capricorn Birthday Gifts for Women - Capricorn Candle Holder Crystals Birthstones Gifts Box Set - Zodiac Gifts Astrology Horoscope Gifts Birthday Gifts for Her Mother Sister Best Friends

  • ♑Unique Birthday Gifts: With uniquely designed horoscope gift box and zodiac candle holder, 6 natural hand-selected stones for the zodiac and a selenite stick, this Capricorn gift set is a perfect birthday gift for your wife, mother, sister, daughter and friends..
  • ♑Gifts with Wrapping Paper and Ribbon: This gift box set is encased in wrapping paper, tied with a ribbon and placed in a protective cardboard box. Makes a wonderful gift to yourself or your loved Capricorn. Comes with a beautiful greeting card with blessed quotes. Perfect gift for Birthday, Wedding, Graduation, Retirement, Holiday, Valentine's day, Mother's day, Father's day, Christmas Day, Anniversary and Thank you gift..
  • ♑Well-designed Capricorn Candle Holder: With the unique zodiac pattern design, when you light the candle, it will emit a unique zodiac pattern light, reflected on the desktop. The interior is silver and the gold coating is more firm and not easy to fall off. Smooth surface without bubbles and bumps, thickened cup body make it far from cracking..
  • ♑196 Page Physical Guidebook + Zodiac Sign Booklet + Well-designed Zodiac Sign Card: Every purchase will get a physical guidebook that carefully introduced the 12 zodiac crystals and the benefits of each crystals, and i....
Check Stock

Capricorn Bowden PTFE Tubing 1M XS Series 1.75MM Filament with 2X PC4-M6 & 2X PC4-M10 Pneumatic Fittings & Tube Cutter for Creality Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5/ CR-10/10S 3D Printer

  • 100% Original Capricorn XS Series tubing..
  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate..
  • PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and durable. PC4-M10 Couplers: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10..
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
  • Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you..
Check Stock

Upgrade 3D Printer Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm 0.4mm Nozzle

  • Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing.
  • Capricorn PTFE tubing: High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more....
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.
  • Suitable For Creality ender 3/ender 3 Pro.
Check Stock

Authentic Creality Assembled Hotend Kit for Ender 3 / Ender 3 Pro/Ender 3 V2 with Capricorn PTFE and Upgraded Pneumatic Fittings, Thermistor, Heating Element, MK8 Sock and 4 Extra Nozzles

  • ...assembled replacement stock hotend from Creality is a plug and play replacement or spare unit for all Creality brand printers including Ender series as well as the CR series printers. See product description for more info on CR series. Also included are some extra brass nozzles, a hotend sock and upgraded Capricorn PTFE tubing which drastically improves the performance of this part over its standard PTFE option..
  • Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. Capricorn PTFE is also manufactured to the highest specifications for 1.75mm filament to ensure that there is no space in the tube once the filament is inside. This perfect fir ensures much better results on retaction moves and helps to ensure a steadier and even flow rate from your hotend!.
  • Upgraded Pneumatic fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer manufacturers with plastic teeth or cheap locking mechanisms. The extruder fitting is a PC4-M6 and the hotend fitting is PC4-M10. These are the standard sizes for most open source 3D printers and the same sizes used by most Chinese ....
Check Stock

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

  • ... firmly grasping the filament between two threaded wheels locked together. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders..
  • 100% Original Capricorn XS Bowden Tube for 1.75mm filament – Capricorn ptfe tube is regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon. Fits for 1.75mm 3d printer Filament..
  • Creality Die Springs – Those springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
  • Easy to Assemble— Our ender 3 extruder and 1 meter capricorn tubing includes all the necessary screws & part....
Check Stock

Official Creality Ender 5 Pro 3D Printer Upgrade Silent Mainboard with Metal Extruder Frame Use Capricorn Bowden PTFE Tubing 220 x 220 x 300mm Build Volume

  • Upgraded Silent Mainboard : Ender 5 Pro 3d printer comes with upgraded V4.2.2 silent Mainboard with TMC2208 drivers, allowing for quieter and more....
  • Capricorn Premium XS Bowden Tubing: Imported Capricorn blue tube with high temperature resistant makes feeding smoother and ensure great printing....
  • Metal Extruder Kit: Ender 5 Pro adopts Creality metal extruder which has better stronger pressure to pushing filament into printer nozzle, improving....
  • Brand Power Supply: Built-in brand power supply, heat up the hot bed to 110℃ in 5 minutes..
  • Semi-Assembled Kits: Creality ender 5 pro comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic....
Check Stock