ReviewsDom Ide Male Connector

SinLoon SCA 80 Pin to 68 50 Pin SCSI Adapter SCSI 68 Female Adapter SCSI 80 Male Adapter for Data Transfer (50/68/80)

  • Product Name: SCSI three card 68-80-50 ide SCSI hard disk adapter 68 Pin Female to 80 Pin Male to 50 pin IDE (SCSI 80 pin, 68 pin, 50 pin adapter).
  • SCSI 68 Female Adapter card is used to convert these interfaces. For example, some adapter cards can convert male to female, and some can convert 50 pin interface to 68 pin interface. In this way, 50 pin low-speed SCSI devices can be connected to 68 pin SCSI interface..
  • SCSI Three Turn Card. Jumper setting for 16 SCSI IDs. Spindle synchronous, delay start & remote start..
  • The main function of the adapter card is to convert different SCSI interfaces, for data transfer between 2 SCSI drives..
  • Note: It's a 50 pin IDE,Only available on industrial server IDE 50-pin motherboards. not a 40 pin or 44 pin ide of an ordinary computer. It can't be used on an ordinary computer. Please pay attention!.
Check Stock

SDTC Tech 4 Pin Male IDE Molex to 15 Pin Female Dual SATA Power Splitter Adapter Cable 18AWG Copper Serial ATA Hard Drive Extension Cable (20cm) - 2 Pack

  • IDE Molex to SATA Power Cable, Converts 4-Pin male plug into 2x 15-Pin Serial ATA Female Connectors..
  • Cable: 1007 18AWG, Length: approx. 20cm, Conductor: Copper..
  • Installation: Connect to motherboard 4-Pin IDE Molex Connector and the other side Connect to15-Pin Hard Drives or CD ROM Drives Plug..
  • Use to adapt older power supply uints for use with new SATA devices, and powering two devices from one interface..
  • Application: suitable for Hard Drives, Solid State Drives, CD ROM Drives, HHD, SSD, DVD Drives etc..
Check Stock

Xiwai SATA Female to IDE 44Pin Converter Adapter PCBA for Laptop & 2.5 Hard Disk Drive

  • SATA Female to IDE 44Pin Converter Adapter PCBA for Laptop & 2.5" Hard Disk Drive  2.5 inch SATA SSD or HDD Drive to IDE 44pin converter Board.
  • Works with all SATA Drives up to 500GB  Supports IDE 66/100/133MB/s.
  • No need for an extra power supply.  44 Pin IDE connector powers the Drive no other cables or adapters are needed.  No driver needed, plug and play,....
  • Great for all Mini Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives.  Adapter is good for up grading an old....
  • Dimensions: 2.72" x 0.55" x 0.69" ( L 69mm x D 14mm x H 17mm ) Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux..
Check Stock

StarTech.com 3.5in Drive Bay IDE to Single CF SSD Adapter Card Reader 35BAYCF2IDE

  • Connect a CF card to a computer through an IDE connector.
  • Compatible with compact flash memory cards and desktop computers with an IDE slot.
  • Compact flash IDE adapter / CF to IDE adapter / CF to IDE converter / IDE to CF card reader.
  • Quick and driver free installation into any IDE 40 pin and 44 pin slot.
Check Stock

Coolgear USB 3.0 to PATA and SATA 3.5 and 2.5 inch Hard Drive Adapter

  • DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector..
  • Allow to operate three HDDs Simultaneously. Data transfer rates up to 5 Gbps, backward compatible with USB 2.0/1.1..
  • Included 12V 2A power cable is for providing stable electricity supply. Note: 4PIN Power Cable is designed for 3.5’’ IDE drive, SATA drives are not applicable and unnecessary..
  • On/Off Switch for HDD protection. LED light shows power and activity status..
  • What we offer: USB 3.0 to IDE+SATA Adapter, USB 3.0 Cable, 4PIN Power Cable, Power Adapter, OTB Software CD, 24h customer email support..
Check Stock

EZ DUPE HD Pal Pro 1 to 3 Hard Drive Duplicator 36GB/Min & Analysis Lab - Deluxe Kit with Rugged Protective Case - SATA & IDE PATA 3.5' & 2.5' HDD/SSD Storage Backup - DM-HS3-4H3BP(D)

  • ▶Universal SATA IDE Hard Drive Adapter: Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector. the USB to ide SATA adapter Support SATA 2.5″/3.5″ HDD.
  • 2.5″/3.5″ IDE HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive.
  • converter allows you to retrieve old files, backup, cloning and upgrade for a speedy transfer.
  • ▶SuperSpeed Performance up to 5Gbps: With an external hard drive adapter, you’re only able to use one drive at a time. Fortunately, this means that you can get the same high performance you’d expect. it supports a data transfer rate of up to 5 Gbps, supports UASP. which is 70% Faster than traditional USB 3.0 and 40% reduction in required processor resources, Backward compatible with USB 2.0 / 1.1.
  • ▶Broad Compatibility: You can use IDE drives, standard SATA drives, The USB to ide SATA adapter compatible with Windows 10/ 8.1/ 8/ 7/Vista/XP, Mac IOS, and LINUX.
  • just plug the adapter in terminals to the hard drive and USB port on the computer, There are no drivers required.
  • ▶Huge Capacity Supportive: Designed to be lightweight and compact. IDE hard drive adapter supports a hard drive capacity of Up to 6TB capacity. a enables access to 2 drives simultaneously, Tips: Some IDE hard drive is old, In order for yo....
Check Stock

SATA/IDE to USB 3.0 Adapter, Unitek IDE Hard Drive Adapter for Universal 2.5\/3.5\ Inch IDE and SATA External HDD/SSD, Support 10TB

  • 【Universal IDE Hard Drive Adapter】Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector. Support SATA 2.5"/3.5" HDD up to 10 TB, IDE 2.5"/3.5" HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Allowed to operate three hard disk drives simultaneously..
  • 【Stable Power Supply】Included 12V 2A power cable. 4PIN Power Cable is designed for 3.5’’ IDE drive..
  • 【SuperSpeed USB 3.0】Data transfer rates up to 5Gbps, backward compatible with USB 2.0/1.1. Support Windows XP/Vista/7/8/10 and Mac OS..
  • 【Driver Free】Plug and play. Automatic Sleep Mode after 30 minutes of inactivity. Support Hot Swapping. On/Off Switch for HDD protection. LED light shows Power and Activity status..
  • 【What We Offer】SATA/IDE to USB 3.0 Adapter Hard Drive Cable x1, 12V 2A Power Adapter x1, 4PIN Power Cable x1.
  • 24h-friendly customer service and email support..
Check Stock

ELEGOO UNO R3 Project Most Complete Starter Kit and ELEGOO Upgraded 37 in 1 Sensor Modules Kit and ELEGOO 120pcs Multicolored Dupont Wire

  • ELEGOO UNO R3 Project Most Complete Starter Kit w/Tutorial Compatible with Arduino IDE (63 Items).
  • ELEGOO Upgraded 37 in 1 Sensor Modules Kit with Tutorial Compatible with Arduino IDE UNO R3 MEGA2560 Nano.
  • ELEGOO 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for....
Check Stock

CERRXIAN SCSI HPDB 68 Pin Female to IDE 50 Pin Female Adapter Converter

  • Designed to convert an HPDB 68pin connection into an IDE 50pin connection for hard driver..
  • Note: This is a 50-pin IDE, not a 40-pin or 44-pin IDE, and it cannot be used in ordinary computers. It can only be used on industrial server IDE 50-pin interface motherboards..
  • Use this adapter to connect old HDD or others old devices with scsi interfaces to newer tape drives or other devices..
  • The IDE connector seat uses a high-thickness gold-plated layer, which is more conductive and more stable..
  • Suitable for disks, tapes, CD-ROMs, rewritable optical drives, printers, scanners and communication equipment, etc..
Check Stock

ELEGOO Mega 2560 Project The Most Complete Ultimate Starter Kit and ELEGOO Upgraded 37 in 1 Sensor Modules Kit and ELEGOO 120pcs Multicolored Dupont Wire

  • ELEGOO Mega 2560 Project The Most Complete Ultimate Starter Kit w/ TUTORIAL Compatible with Arduino IDE.
  • ELEGOO Upgraded 37 in 1 Sensor Modules Kit with Tutorial Compatible with Arduino IDE UNO R3 MEGA2560 Nano.
  • ELEGOO 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino.
Check Stock

PSCCO CF Card to 40-Pin IDE Adapter Compact Flash CF to IDE Bootable Converter

  • Supports CF-I and CF-II two types of cards:IBM micro hard disk that also supports CF-II interface..
  • The IDE interface is a 40-pin/2.54mm female connector:this card can be plugged directly into the IDE socket..
  • Standard IDE interface:true-IDE mode,and supports DMA-33 transfer mode.Power supply from 5.0V or 3.3V,Select the appropriate supply voltage according to your CF card..
  • Widely used in notebook computers,personal digital assistants(PDAs), portable instruments,or industrial equipment..
  • Package included:1pcs CF to 40-Pin IDE Adapter.It has the characteristics of low power consumption and no damage..
Check Stock