ReviewsDouble Barn Door Hardware

SKYSEN 6FT Sliding barn Door Hardware kit, Barn Door Track, 1/4” Thick Material- Combination Track- Smooth and Quiet- Easy to Install- Black (J Shape-5)

  • [SUPER QUALITY RAW MATERIAL] Barn door hardware kit are made of 1/4” thick carbon steel (Maximum load 265lbs). Barn door wheel are made of POM (Stronger than plastic or nylon). Barn door spacer is also made of carbon steel (More stable than other plastic spacer). The bolts and leg screws are 8.8 grade (Keep the barn door hardware system last for long). The surface is spray black powder coat (Anti-rust, Looks smooth)..
  • [EASY TO INSTALL] Barn door track pre-drilled hole space is 16", Step by Step Instruction included. Our Instruction is listing every step for installation from A to Z. You can finish the installation of barn door hardware kit in half an hour if you get 2 workers. In case you get any problem or missing parts during installation, please free feel to contact us via amazon..
  • [IF MY BARN DOOR FIT THIS SIZE] 6FT Barn door hardware kit fit for door panel width up to 36”, Fit for door thickness from 1-3/8" to 1-3/4"(If you your barn door panel is too thin, then you can using the 5mm black spacer pad inside package, if your barn door is too thick, then you need to buy longer bolt extra). If you have a door way trim, then you need to buy an extra trim board to install the barn door track or just remove your trim..
Check Stock

SKYSEN 6FT Barn Door Hardware Kit, Sliding Barn Door Hardware Kit, Barn Door Track, Combination Track- Smooth and Quiet- Easy to Install- Manual Included- Lite Version- Black (J-Lite-5)

  • ✅[INNOVATION DESIGN-LIGHT VERSION] By using the light version carbon steel for barn door hardware system(lighter but hold maximum 265lbs, More stronger and stable), The barn door track will be easy to lift up during installation. Low clearance barn door hardware, Less space required, The barn door roller is shorter, Which make the space required from top of barn door to ceiling will be only 5"..
  • ✅[PREMIUM RAW MATERIAL] Barn door hardware kit are made of premium quality carbon steel in thickness of 5/32", Which make the barn door kit system more sturdy and stable durability. The wheel part are made of POM(better than steel, few scratch to barn door track), 2 pcs Bearings in side wheel, All these ensure the sliding will be smoothly and quietly..
  • ✅[REASONS FOR CHOOSING US] Get super quality barn door hardware kit from us ,All the barn door hardware kit have been inspected in factory before delivery，Passed 100,000 times opening and closing test.Get barn door hardware kit with a manufacturer price,why not ? In case you got any confustions on installation or missing parts after got the package ,kindly feel free to contact us via amazon directly ,we will ....
Check Stock

SANKEYTEW 6FT Barn Door Hardware Kit, lite Version- Combination Track- Easy to Install- Manual Included- Black (J-L-5)

  • ✅[UPGRADE DESIGN-LITE VERSION] Adapt the new type carbon steel instead of the standard one(lighter but load maximum 265lbs, More sturdy and stable), Make it easy to hold up the barn door track during installation. Low clearance barn door hardware system, Less space required above the doorway, only 5" required from top of barn door to ceiling ..
  • ✅[HIGH STANDARD RAW MATERIAL] Barn door hardware kit are made of Super quality steel in 5/32" thickness, Ensure barn door system will be more sturdy and stable durability. The wheel part are pom made with 2 pcs Bearings inside(more function than steel, less scratch to barn door rail), All these making the sliding smoothly and quietly..
  • ✅[WHY US] Get high quality barn door hardware kit from us ,All the barn door track had inspected in factory before delivery，Passed more than 100,000 times opening and closing test. Barn door hardware kit with a manufacturer price,why not ? In case you got any confustions on installation or missing parts after got the package ,kindly feel free to contact us via amazon directly ,we will get back to you in 24 hours ,thank you ..
  • ✅[DO MY BARN DOOR FIT] 6ft Barn door hardware kit hold up to 265 lbs, Fit for door panel width up to 36", Fit for door panel thickness from 1-3/8" t....
Check Stock

DaAzHai 6 Ft Sliding Barn Door Hardware:Easy to Install -Smoothly and Quietly Barn Door Hardware One-Piece Rail Low Ceiling Barn Door Track

  • At DaAzHai , all of our barn door hardware is made from quality materials and is handcrafted by skilled artisans.Low clearance barn door hardware, Less space required because of barn door hardware kit are made of premium quality carbon steel. Attention: the steel bar is in pieces that have to be assembled..
  • DaAzHai sliding barn door hardware use the light version carbon steel for barn door track system. Our barn door hardware kit is lighter but hold more stronger and stable. Fit door weight capacity: 245lbs.
  • Fit door panel thickness: 1-5/8" to 1-3/4''. If the door is thicker , please add a piece of spacer we provided to increase the distance between track and wall. Perfect for indoor decoration in kitchen, bedroom, dressing room, club, pub and so on..
  • DaAzHai barn door hardware comes complete and ready for you to install yourself. We provide simple instructions so you can quickly install your barn door hardware stress-free. Our instruction explains every step with words and picture and all data is measured in inch. It is very easy for you to take a reference during the installation..
  • DaAzHai barn door hardware kit includes (2)Steel Hanger, (5) Flat Track, (9) Adjustable Spacer, (1) Floor guide, (9) Fastener Screw, (2) Doo....
Check Stock

FREDBECK 4FT Mini Small Cabinet Sliding Barn Door Hardware Kit J Shape Double Door Black Roller Rails Closet Cupboard Storage Cabinet Kit(No Cabinet)

  • ADVANCED TECHNOLOGY YOU CAN BELIEVE: At FREDBECK Hardware, all of our barn door hardware is made from quality materials and is handcrafted by skilled artisans. The use of advanced cutting technology in our factory to ensure the precise size of the sliding barn door accessories, especially in the axis of the hanging rail and track interface to show its unique features and advantages..
  • EASY TO INSTAL: Our barn door hardware comes complete and ready for you to install yourself. Professional Step-by-step instruction and customer service team help you solve all installation problems in time. Save the cost of finding a carpenter or decoration team..
  • PACKAGE INCLUDED: A Barn Door Hardware Kit with 1x 4FT Rail, 3 x Rail Spacers, 4x Rollers, 2x Door Stops, 2x Floor Guide.Cabinet Not Included..
  • EXTRA STRONG HARDWARE: Our barn door hardware set is constructed of high-strength powder-coated metal tracks and pulleys with the ability to hold up to 60 lbs. The 4FT double door track kit Fit door panel thickness from 11/16 inch to 1 1/8 inch.Industrial grade material and excellent forging process provide a safe and guaranteed life for your family..
  • 7x24 Hours Online Service & 100% Money Back Guarantee -- If there is any parts missing or broken when package arrived,pls co....
Check Stock

DaAzHai 5 Ft Sliding Door Hardware:Easy to Install -Smoothly and Quietly Sliding Barn Door Hardware Kit Single Door Track Low Ceiling Barn Door Hardware Kit, Modular Track with Stable Connection

  • At DaAzHai, all of our low clearance barn door hardware is made from quality materials and is handcrafted by skilled artisans. Low clearance barn door hardware, less space required because of low profile barn door hardware are made of premium quality carbon steel. Attention: the steel bar is in pieces that have to be assembled..
  • DaAzHai sliding barn door hardware use the light version carbon steel for barn door track system. Our barn door hardware kit is lighter but hold more stronger and stable. Fit door weight capacity: 265 lb.
  • Fit door panel thickness: 1-5/8" to 1-3/4". If the door is thicker , please add a piece of spacer we provided to increase the distance between track and wall. Perfect for indoor decoration in kitchen, bedroom, dressing room, club, pub and so on..
  • DaAzHai sliding closet door hardware comes completely and get ready for you to install by yourself. We provide simple instructions so you can quickly install your sliding barn door with hardware kit included stress-free. Our instruction explains every step with words and picture and all data is measured in inch. It is very easy for you to take a r....
Check Stock

National Hardware Barn Door Bundle with Designer Kit Featuring Soft Close, Madison Pull and Barn Door Privacy Lock in Brushed Gold

  • HIGH QUALITY: Our top of the line Designer hardware kit is perfect for those looking to make a statement. This premium metal wheel kit comes fully equipped with soft close hardware and is available in premium finishes..
  • DESIGN MADE SIMPLE: We’ve created easy to follow instructions, our Designer kit ships in one piece and can be doubled to encompass a 12ft wide doorway..
  • EVERYTHING YOU NEED: Each kit includes all the mounting hardware required and the floor guides you need for either a single mortised or double bracket floor guide, a wall mount guide, as well as our Soft Close Kit..
  • ACCESSORIZE: Make your new barn door pop by adding a stylish handle, from our clean and traditional Charleston to the sleek and transitional Troy or the simple and modern Madison..
  • Adds a modern design to interior barn door hardware from National Hardware.
  • Recommended for use on wood interior doors.
  • Finish matched to perfectly coordinate with National Hardware's barn door kits.
  • Adds privacy to your interior sliding barn door.
  • Sleek style sliding latch recommended for use on single, bi-parting or bypassing wooden doors.
  • Adds privacy and prevents door from being opened.
  • Includes emergency release to prevent being locked in or out.
Check Stock

HOMCOM 6' Rustic Interior Sliding Barn Door Mounting Hardware Kit, White

  • 2-Door Hanging Rail: Industrial sliding barn door hardware kit will change the traditional barn door into a sliding door, that is useful and practical. Fits for two barn doors with a thickness of 35-45mm and 40-45mm.
  • Security Assurance: This barn door hardware kit is made of quality carbon steel for strength, which can hold a maximum of 220 lbs..
  • Space Saver: Saving space is a piece of cake with this classic sliding barn door. Multiple rooms can be opened without the hassle of swinging doors..
  • Package included: Instruction and hardware included to help you solve most installation problems. DOOR NOT INCLUDED..
  • Simple Assembly: There are pre-drilled holes in the barn door track, and step-by-step instruction is included. 2 workers can complete the installation of barn door hardware in half an hour..
Check Stock

WINSOON 4FT-16FT Metal Sliding Bypass Barn Wood Door Hardware Kit System Bending Design Wall Mount Bracket Fit Double Wooden Doors (4FT)

  • [HARDWARE MATERIAL] - WINSOON barn door hardware is made using premium carbon steel. High quality steel with frosted black surface makes it heavier than other sliding barn door hardwares amd fire proof, water proof and rust proof. It also allows you to install your barn doors interior and exterior..
  • [EASY TO INSTALL] - This hardware requires at max 2 people. Super detailed installation manual included that the measurements are all in inches. All tracks can be connected with other tracks with a junction plate. Professional customer service team help you solve all installation problems in time, accept custom-made barn door hardware. THE CLEARANCE from the top of your door to the ceiling should be at least 8 inch to install the bypass barn door hardware..
  • [PACKAGE INCLUDED] - A Barn Door Hardware Kit (2x 4FT Rails,4x Hangers,6x Rail Supports,3x U Brackets,4x Door Stops,4x Anti-jump Pas, 4x End Caps,2x Floor Guides,1x Hex Key. The rail is pre-drilled holes for 16 inches wall studs. Rail and hanger arms are 1-9/16" wide and 1/5"thick. All other necessary hardware are included as you see in the pictures. * DOOR NOT INCLUDED.
  • [DOOR WEIGHT CAPACITY] - Max 230 lbs per door. This 4FT bypass barn door hardware can be used for two 20"-24" wide doors. Fit 1-3/8" to ....
Check Stock

WINSOON 4FT-16FT Metal Sliding Bypass Barn Wood Door Hardware Kit System Bending Design Wall Mount Bracket Fit Double Wooden Doors (5FT)

  • [HARDWARE MATERIAL] - WINSOON barn door hardware is made using premium carbon steel. High quality steel with frosted black surface makes it heavier than other sliding barn door hardwares amd fire proof, water proof and rust proof. It also allows you to install your barn doors interior and exterior..
  • [EASY TO INSTALL] - This hardware requires at max 2 people. Super detailed installation manual included that the measurements are all in inches. All tracks can be connected with other tracks with a junction plate. Professional customer service team help you solve all installation problems in time, accept custom-made barn door hardware. THE CLEARANCE from the top of your door to the ceiling should be at least 8 inch to install the bypass barn door hardware..
  • [PACKAGE INCLUDED] - A Barn Door Hardware Kit (2x 5FT Rails,4x Hangers,8x Rail Supports,4x U Brackets,4x Door Stops,4x Anti-jump Pas, 4x End Caps,2x Floor Guides,1x Hex Key. The rail is pre-drilled holes for 16 inches wall studs. Rail and hanger arms are 1-9/16" wide and 1/5"thick. All other necessary hardware are included as you see in the pictures. * DOOR NOT INCLUDED.
  • [DOOR WEIGHT CAPACITY] - Max 230 lbs per door. This 5FT bypass barn door hardware can be used for two 26"-30" wide doors. Fit 1-3/8" to ....
Check Stock

WINSOON New Bending Room Wall Mount Bypass Double Black Sliding Wood Door Roller Hardware Track Pulley Folding Steel Kit (6FT / Two Door Set)

  • [HARDWARE MATERIAL] - WINSOON barn door hardware is made using premium carbon steel. High quality steel with frosted black surface makes it heavier than other sliding barn door hardwares amd fire proof, water proof and rust proof. It also allows you to install your barn doors interior and exterior..
  • [EASY TO INSTALL] - This hardware requires at max 2 people. Super detailed installation manual included that the measurements are all in inches. All tracks can be connected with other tracks with a junction plate. Professional customer service team help you solve all installation problems in time, accept custom-made barn door hardware. THE CLEARANCE from the top of your door to the ceiling should be at least 8 inch to install the bypass barn door hardware..
  • [PACKAGE INCLUDED] - A Barn Door Hardware Kit (2x 6FT Rails,4x Hangers,10x Rail Supports,5x U Brackets,4x Door Stops,4x Anti-jump Pas, 4x End Caps,2x Floor Guides,1x Hex Key. The rail is pre-drilled holes for 16 inches wall studs. Rail and hanger arms are 1-9/16" wide and 1/5"thick. All other necessary hardware are included as you see in the pictures. * DOOR NOT INCLUDED.
  • [DOOR WEIGHT CAPACITY] - Max 230 lbs per door. This 6FT bypass barn door hardware can be used for two 32"-36" wide doors. Fit 1-3/8" to....
Check Stock