ReviewsDouble Component Extruder

Bowden Extruder V2.1 RNC Nano Coated Gear DDB Universal Geared Extruder for 3D Printer

  • Kit includes: 1pc Universal Geared Extruder w/ RNC Nano Coated Gear, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket.
  • Upgraded High performance extruder for 3D Printer.
  • Upgrade Highlights: 1. The position of the gears and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.1 version of the DDB extruder support filament running thru in and out (it has no specified direction, and you are able to use either side of the material ports).
  • 3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running smoothly. 4. The new outer shell design with edge cut on the top of the extruder is reserved for the screw rod of Ender 3 printer. 5. Upgraded shell using new mixed materials.
  • ***Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully.
Check Stock

Micro Swiss Direct Drive Extruder for Creality Ender 5

  • 【Official New Product from Creality】Sprite Extruder Pro Upgrade Kit enables all Ender 3 series 3D printers to have direct extrusion and high temperature printing conditions..
  • 【Better new design】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation..
  • 【Double gear feeding, stable and reliable】The double tooth structure does not damage the consumables, and the feeding is more reliable and stable. Reduces the chance of clogged nozzles when retracting consumables and failures when loading new consumables. Full metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C..
  • 【Easy to install, more adaptable】Adaptable, Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/Ender 3 Max/CR-10 Smart Pro 3D Printers, easy to install and use. It does not affect the inherent nature of the printer function as it is a complete extrusion kit. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly..
Check Stock

Creality Ender 5 Pro 3D Printer 32-bit V4.2.2 Silent Mainboard DIY FDM Printing Powerful Filament Extruder Resume Printing Cubic Structure High Precision Print Size 8.7x8.7x11.8 inch

  • 【US Engineer Professional Tech Support Safe Buy】100% Original Factory CREALITY Ender 5 Pro 3D Printer, we got U.S. Engineers Tech Support and....
  • 【Upgraded Ultra Mute Mainboard】Ender 5 Pro 3d printer equipped with upgraded V4.2.2 silent Mainboard with TMC2208 drivers, always ensures smooth....
  • 【Double Y-axis】Ender5 Pro has double Y-axis control system with synchoronus operation and stable output to avoid vibrations resulting from....
  • 【Metal Extruder Kit】Creality metal extruder which has better stronger pressure to pushing filament into printer nozzle, improving the printer's....
  • 【Why Ender 5 Pro?】Enhanced safety, more silent printing performance as well as a combination of DIY fun and whole machine stability with high....
Check Stock

Official 3D Printer Extruder Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series

  • ✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term....
  • ✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture....
  • ✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly....
  • ✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are....
  • ✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini,....
Check Stock

Redrex Ender 3 Extruder Bowden Aluminum Upgraded with 40 Teeth MK8 Drive Gear Kit Compatible with Creality Ender 3V2 /Ender 3 Pro/CR-10 Series and Other Reprap Prusa 3D Printers [Right Hand]

  • 【Application】:This metal extruder is compatible with Creality Ender 3 V2,Ender 3 Pro,Ender 3,CR-10,CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10....
  • 【Direct Drive Extruder】:The upgrade extruder supports direct extrusion.A direct drive extruder improves extrusion and retraction by removing the....
  • 【Filament】：The extruder feeder supports PLA/ABS/Wood/Hips/Flexible/PTEG,with 40 teeth drive gear feeds the 1.75mm filament very smoothy..
  • 【Durable Feeder】:The extruder feeder is made of heavy-duty aluminum alloy material,which is more durable and stable than the plastic one..
Check Stock

Geeetech A10M 3D Printer with Mix-Color Printing Adjustable Dual Extruder Design Filament Detector and Break-resuming Function Updated 3mm Hotbed Kit,Prusa I3 Quick Assembly DIY kit.

  • ✔️【Unique Double Color Printing】2 extruder module and 2-in-1-out hot end, which deliver 4 types of printings--Single color, Double color,....
  • ✔️【20 Minutes Self-Assembly】The modularized design divided the printer into 6 modules--Gantry kit, Bottom kit, Extruder motors, PSU kit, LCD....
  • ✔️【GT2560 V4.1b Marlin Control Board】Using Marlin firmware, stable and easy to operate. It will support auto-leveling function. All what you....
  • ✔️【Filament Detector and Break-Resume】The filament detection system will alert you to change filament when the printer runs in air or the....
  • ✔️【After-sale Services】Our products have strict quality inspection test before leaving the factory,and if you have any problem with this....
Check Stock

Creality Upgraded MK-8 Metal Feeder Extruder Frame Aluminum Gray Bowden Extruder Drive for Creality Ender 3/3 Pro/3V2/5/5 Plus, CR-10 Series, CR -10S/20/20 Pro 3D Printer

  • WIDE APPLICATION: The extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware. Suitable for Creality 3D Printers Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro..
  • ADVANTAGES: Pushing the filament into the printer nozzle with more pressure to improve the performance of the printer. The bolt of our extruder kits is adjustable so that you can adjust the pressure of the extruder gear as needed..
  • EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. This extruder DIY kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame..
  • STABLE: All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • CUSTOMER SUPPORT - If you have any problems with our product, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you..
Check Stock

Bowden Extruder Upgraded V3.0 Dual Drive Gear High-Performance Parts for CR10,Ender 3 Series,Anycubic Mega S, I3 Mega Chiron,Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer

  • Latest Dual Drive Extruder for Most 3D printers..
  • Update1: SIMAX3D Dual Gear Extruder V3.0 make an independent feeder inside to make filament wiring go inside and out super smoothly..
  • Update2: SIMAX3D Dual Drive Extruder V3.0 change the bowden buckle to pneumatic connector, you’re able to switch only this part after long time use instead of the whole extruder..
  • Update3: This Geared Extruder has an angle for Z-rod which is adapted to those 3D Printer who has an close Z axis installed like Ender 3 old version..
  • Package Include: User Manual*1. SIMAX3D Dual drive extruder set *1.
Check Stock

BIQU H2 Extruder, V2.0 New Upgraded Dual Gear Extruder, Smooth Not Easy to Block 3D Printer Direct Extruder 1.75mm Filament for BIQU B1, Ender & CR Series Printers, CR-10S Pro

  • ...igh temperature resistance, durability, high precision, and higher surface finish. The output gear modulus design was changed from 0.5 to 0.25, reducing the gear outer diameter, effectively solving the weak points of V1.0 gear jamming and unsmooth extrusion..
  • ✔️All-in-one Design & High Precision: The short-range extruder integrates the hot end of the nozzle, extruder, stepping motor, cooling fan, etc., double-gear extrusion, fast extrusion of consumables, short-range extrusion, short thread, and accuracy High, the control of the feeding amount is more accurate than remote extrusion, the withdrawal is more accurate, and the printing quality is better..
  • ✔️Extremely Smooth & Reducing Clogging: The smoothness of the throat and the inner wall of the nozzle reaches Ra0.4, which can effectively prevent clogging. H2 V2.0 adopts high-quality titanium-copper alloy hose, which has better heat dissipation and high temperature resistance, and the printing temperature can be as high as 400°C. It is the best quality hose material on the market. The hose is easy to disassemble, making it easier to use. convenient..
  • ✔️Lightweight & Compact & Powerful: BIQU H2 extruder weighs only 219 grams, which effectively overcomes the short-stroke print head's heavier s....
Check Stock

CREALITY Official Extruder for Ender 3 3D Printer Aluminum Drive Feed Bowden Extruders Upgrade Accessories Kit for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender-5 Series and CR-10 Series

  • Upgrade Material - High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term use..
  • Stable and Durable-Full metal aluminum alloy, DIY kit and need to assemble. Metal material extruder kit is more stable and durable than the original plastic one while working..
  • Easy to Install - All you do is unbolt the old original plastic extruder and screw in the new " Red Metal Extruder ", then it is ready to print. Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame..
  • Wide Compatibility - Red extruder is suitable for Creality 3d printers accessories: Ender 3, Ender 3 V2, Ender 3 Pro, Ender-3 Max, Ender 5 / 5 Plus / 5 Pro, CR-10S, CR-10, CR 10 mini, CR-10 S5, CR-10 S4, CR 20, CR-20 Pro, CR-X..
  • Creality Official Sales: All products are officially sold, genuine and high-quality, please rest assured to buy. All the necessary accessories are included in the package..
Check Stock

eSUN 3D Printer Cleaning Filament 1.75mm Natural 0.1kg for All 1.75mm FDM 3D Printers, 1.75mm Cleaning

  • Excellent heat stability, Wide cleaning temperature range of 150 to 260 celsius..
  • Cleans the extruder's interior by removing accumulated residual filaments..
  • Possesses a certain level of adhesive quality. Will not clog extruder..
  • Clean the 3D printer's extruder before and after printing for better extruder protection..
Check Stock